atiStkSwLldpDot3RemLinkAggPortId
AtiStackSwitch9000-MIB ·
.1.3.6.1.4.1.207.8.17.10.4.3.1.1.15
Object
column
Integer32
This object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component associated with the remote system.
If the remote port is not in link aggregation state and/or
it does not support link aggregation, this value should be
zero.
Context
- MIB
- AtiStackSwitch9000-MIB
- OID
.1.3.6.1.4.1.207.8.17.10.4.3.1.1.15- Type
- column
- Access
- readonly
- Status
- current
- Parent
- atiStkSwLldpDot3RemEntry
- Table
- atiStkSwLldpDot3RemTable
- Siblings
- 15
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atiStkSwLldpDot3RemModuleNum This object specifies the ID of a module present in the switch
stack. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.17.10.4.3.1.1.1 |
| atiStkSwLldpDot3RemPowerMDIEnabled The truth value used to identify whether MDI power is
enabled on the given port associated with the remote system. | column | Enumeration | .1.3.6.1.4.1.207.8.17.10.4.3.1.1.10 |
| atiStkSwLldpDot3RemPowerPairControlable The truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be contro… | column | Enumeration | .1.3.6.1.4.1.207.8.17.10.4.3.1.1.11 |
| atiStkSwLldpDot3RemPowerPairs This object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the remote system. | column | Integer32 | .1.3.6.1.4.1.207.8.17.10.4.3.1.1.12 |
| atiStkSwLldpDot3RemPowerClass This object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
remote system. | column | Integer32 | .1.3.6.1.4.1.207.8.17.10.4.3.1.1.13 |
| atiStkSwLldpDot3RemLinkAggStatus The bitmap value contains the link aggregation capabilities
and the current aggregation status of the link. | column | Bits | .1.3.6.1.4.1.207.8.17.10.4.3.1.1.14 |
| atiStkSwLldpDot3RemMaxFrameSize An integer value indicating the maximum supported frame
size in octets on the port component associated with the
remote system. | column | Integer32 | .1.3.6.1.4.1.207.8.17.10.4.3.1.1.16 |
| atiStkSwLldpDot3RemPortNum The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The atiStkSwLldpDot3RemPortNum
identifies the… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.17.10.4.3.1.1.2 |
| atiStkSwLldpDot3RemIndex This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.17.10.4.3.1.1.3 |
| atiStkSwLldpDot3RemPortAutoNegSupported The truth value used to indicate whether the given port
(associated with remote system) supports Auto-negotiation. | column | Enumeration | .1.3.6.1.4.1.207.8.17.10.4.3.1.1.4 |
| atiStkSwLldpDot3RemPortAutoNegEnabled The truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the remote system. | column | Enumeration | .1.3.6.1.4.1.207.8.17.10.4.3.1.1.5 |
| atiStkSwLldpDot3RemPortAutoNegAdvertisedCap This object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
remote system. | column | Bits | .1.3.6.1.4.1.207.8.17.10.4.3.1.1.6 |
| atiStkSwLldpDot3RemPortOperMauType An integer value that indicates the operational MAU type
of the sending device.
This object contains the integer value derived from the
list position of the corresp… | column | Enumeration | .1.3.6.1.4.1.207.8.17.10.4.3.1.1.7 |
| atiStkSwLldpDot3RemPowerPortClass The value that identifies the port Class of the given port
associated with the remote system. | column | Enumeration | .1.3.6.1.4.1.207.8.17.10.4.3.1.1.8 |
| atiStkSwLldpDot3RemPowerMDISupported The truth value used to indicate whether the MDI power
is supported on the given port associated with the remote
system. | column | Enumeration | .1.3.6.1.4.1.207.8.17.10.4.3.1.1.9 |