atiStkSwLldpMedRemCivicLocation
AtiStackSwitch-MIB ·
.1.3.6.1.4.1.207.8.17.10.4.4.1.1.27
Object
column
SNMPv2-TCDisplayString
Civic location information
Context
- MIB
- AtiStackSwitch-MIB
- OID
.1.3.6.1.4.1.207.8.17.10.4.4.1.1.27- Type
- column
- Access
- readonly
- Status
- current
- Parent
- atiStkSwLldpMedRemEntry
- Table
- atiStkSwLldpMedRemTable
- Siblings
- 27
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atiStkSwLldpMedRemModuleId This object specifies the ID of a module present in the switch
stack. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.1 |
| atiStkSwLldpMedRemMediaPolicyUnknown A value of 'true' indicates that the
network policy for the specified application type is
currently unknown. In this case, the VLAN ID, the
layer 2 priority and the DSCP value… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.10 |
| atiStkSwLldpMedRemMediaPolicyTagged A value of 'true' indicates that the application is using a
tagged VLAN.
A value of 'false' indicates that for the specific application
the device either is using an untagged VLA… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.11 |
| atiStkSwLldpMedRemHardwareRev The vendor-specific hardware revision string
as advertised by the remote endpoint. | column | OctetString | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.12 |
| atiStkSwLldpMedRemFirmwareRev The vendor-specific firmware revision string
as advertised by the remote endpoint. | column | OctetString | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.13 |
| atiStkSwLldpMedRemSoftwareRev The vendor-specific software revision string
as advertised by the remote endpoint. | column | OctetString | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.14 |
| atiStkSwLldpMedRemSerialNum The vendor-specific serial number
as advertised by the remote endpoint. | column | OctetString | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.15 |
| atiStkSwLldpMedRemMfgName The vendor-specific manufacturer name
as advertised by the remote endpoint. | column | OctetString | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.16 |
| atiStkSwLldpMedRemModelName The vendor-specific model name
as advertised by the remote endpoint. | column | OctetString | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.17 |
| atiStkSwLldpMedRemAssetID The vendor-specific asset tracking identifier
as advertised by the remote endpoint. | column | OctetString | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.18 |
| atiStkSwLldpMedRemXPoEDeviceType Defines the type of Power-via-MDI (Power over Ethernet) advertised
by the remote device.
A value pseDevice(2) indicates that the device is advertised as a
Power So… | column | Enumeration | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.19 |
| atiStkSwLldpMedRemPortNum The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.2 |
| atiStkSwLldpMedRemXPoEPSEPowerAv This object contains the value of the power available from the
PSE via this port expressed in units of 0.1 watts on the remote
device. | column | tenth of watt Unsigned32 | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.20 |
| atiStkSwLldpMedRemXPoEPSEPowerSource Defines the type of PSE Power Source advertised
by the remote device.
A value primary(2) indicates that the device advertises its power
source as primary.
… | column | Enumeration | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.21 |
| atiStkSwLldpMedRemXPoEPSEPowerPriority This object contains the value of the PSE power priority
advertised by the remote device.
A value critical(2) indicates that the device advertises its power
prior… | column | Enumeration | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.22 |
| atiStkSwLldpMedRemXPoEPDPowerReq This object contains the value of the power required by a
PD connected remotely to the port
expressed in units of 0.1 watts. | column | tenth of watt Unsigned32 | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.23 |
| atiStkSwLldpMedRemXPoEPDPowerSource Defines the type of Power Source advertised as being used
by the device connected remotely to the port.
A value fromPSE(2) indicates that the device advertises its… | column | Enumeration | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.24 |
| atiStkSwLldpMedRemXPoEPDPowerPriority Defines the priority advertised as being required by the PD
connected remotely to the port.
A value critical(2) indicates that the device advertises its power
Prio… | column | Enumeration | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.25 |
| atiStkSwLldpMedRemCoordLocation Coordinate based location information | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.26 |
| atiStkSwLldpMedRemElinLocation Elin location information | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.28 |
| atiStkSwLldpMedRemIndex This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.3 |
| atiStkSwLldpMedRemDeviceClass Device Class as advertised by the device remotely connected to the
port. | column | AtiStkSwLldpMedDeviceClass | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.4 |
| atiStkSwLldpMedRemCapabilities The bitmap includes the MED organizationally defined set of LLDP
TLVs whose transmission is possible on the LLDP agent of the remote
device connected to this port. Each bit in the… | column | AtiStkSwLldpMedCapabilities | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.5 |
| atiStkSwLldpMedRemMediaPolicyAppType The media type that defines the primary function of the
application for the policy advertised by the endpoint connected
remotely to this port. | column | PolicyAppType | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.6 |
| atiStkSwLldpMedRemMediaPolicyVlanID An extension of the VLAN Identifier for the remote system
connected to this port, as defined in IEEE 802.1P-1998.
A value of 1 through 4094 is used to define a vali… | column | Integer32 | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.7 |
| atiStkSwLldpMedRemMediaPolicyPriority This object contains the value of the 802.1p priority
which is associated with the remote system connected at
given port. | column | Integer32 | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.8 |
| atiStkSwLldpMedRemMediaPolicyDscp This object contains the value of the Differentiated Service
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
which is associated with remote system connected at the por… | column | Integer32 | .1.3.6.1.4.1.207.8.17.10.4.4.1.1.9 |