atiStkSwLldpDot3RemPortOperMauType

AtiStackSwitch-MIB · .1.3.6.1.4.1.207.8.17.10.4.3.1.1.7
MIB view Table view

Object

column Enumeration 
An integer value that indicates the operational MAU type
of the sending device.
              
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed in
in IETF RFC 3636 (or subsequent revisions) and is equal
to the last number in the respective dot3MauType OID.
              
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field will be 29. For MAU types not listed in RFC 3636
(or subsequent revisions), the value of this field shall be
set to zero.

Context

MIB
AtiStackSwitch-MIB
OID
.1.3.6.1.4.1.207.8.17.10.4.3.1.1.7
Type
column
Access
readonly
Status
current
Parent
atiStkSwLldpDot3RemEntry
Table
atiStkSwLldpDot3RemTable
Siblings
15

Syntax

Enumeration

Values & Constraints

Enumerated Values
1dot3MauTypeAUI
2dot3MauType10Base5
3dot3MauTypeFoirl
4dot3MauType10Base2
5dot3MauType10BaseT
6dot3MauType10BaseFP
7dot3MauType10BaseFB
8dot3MauType10BaseFL
9dot3MauType10Broad36
10dot3MauType10BaseTHD
11dot3MauType10BaseTFD
12dot3MauType10BaseFLHD
13dot3MauType10BaseFLFD
14dot3MauType100BaseT4
15dot3MauType100BaseTXHD
16dot3MauType100BaseTXFD
17dot3MauType100BaseFXHD
18dot3MauType100BaseFXFD
19dot3MauType100BaseT2HD
20dot3MauType100BaseT2FD
21dot3MauType1000BaseXHD
22dot3MauType1000BaseXFD
23dot3MauType1000BaseLXHD
24dot3MauType1000BaseLXFD
25dot3MauType1000BaseSXHD
26dot3MauType1000BaseSXFD
27dot3MauType1000BaseCXHD
28dot3MauType1000BaseCXFD
29dot3MauType1000BaseTHD
30dot3MauType1000BaseTFD
31dot3MauType10GigBaseX
32dot3MauType10GigBaseLX4
33dot3MauType10GigBaseR
34dot3MauType10GigBaseER
35dot3MauType10GigBaseLR
36dot3MauType10GigBaseSR
37dot3MauType10GigBaseW
38dot3MauType10GigBaseEW
39dot3MauType10GigBaseLW
40dot3MauType10GigBaseSW

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
atiStkSwLldpDot3RemModuleNum
This object specifies the ID of a module present in the switch stack.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.207.8.17.10.4.3.1.1.1
atiStkSwLldpDot3RemPowerMDIEnabled
The truth value used to identify whether MDI power is enabled on the given port associated with the remote system.
columnEnumeration.1.3.6.1.4.1.207.8.17.10.4.3.1.1.10
atiStkSwLldpDot3RemPowerPairControlable
The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be contro…
columnEnumeration.1.3.6.1.4.1.207.8.17.10.4.3.1.1.11
atiStkSwLldpDot3RemPowerPairs
This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the remote system.
columnInteger32.1.3.6.1.4.1.207.8.17.10.4.3.1.1.12
atiStkSwLldpDot3RemPowerClass
This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the remote system.
columnInteger32.1.3.6.1.4.1.207.8.17.10.4.3.1.1.13
atiStkSwLldpDot3RemLinkAggStatus
The bitmap value contains the link aggregation capabilities and the current aggregation status of the link.
columnBits.1.3.6.1.4.1.207.8.17.10.4.3.1.1.14
atiStkSwLldpDot3RemLinkAggPortId
This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port component associate…
columnInteger32.1.3.6.1.4.1.207.8.17.10.4.3.1.1.15
atiStkSwLldpDot3RemMaxFrameSize
An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system.
columnInteger32.1.3.6.1.4.1.207.8.17.10.4.3.1.1.16
atiStkSwLldpDot3RemPortNum
The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The atiStkSwLldpDot3RemPortNum identifies the…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.207.8.17.10.4.3.1.1.2
atiStkSwLldpDot3RemIndex
This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.207.8.17.10.4.3.1.1.3
atiStkSwLldpDot3RemPortAutoNegSupported
The truth value used to indicate whether the given port (associated with remote system) supports Auto-negotiation.
columnEnumeration.1.3.6.1.4.1.207.8.17.10.4.3.1.1.4
atiStkSwLldpDot3RemPortAutoNegEnabled
The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the remote system.
columnEnumeration.1.3.6.1.4.1.207.8.17.10.4.3.1.1.5
atiStkSwLldpDot3RemPortAutoNegAdvertisedCap
This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the remote system.
columnBits.1.3.6.1.4.1.207.8.17.10.4.3.1.1.6
atiStkSwLldpDot3RemPowerPortClass
The value that identifies the port Class of the given port associated with the remote system.
columnEnumeration.1.3.6.1.4.1.207.8.17.10.4.3.1.1.8
atiStkSwLldpDot3RemPowerMDISupported
The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system.
columnEnumeration.1.3.6.1.4.1.207.8.17.10.4.3.1.1.9