atiL2DevicePortVlanTagPriorityConfig

AtiL2-MIB · .1.3.6.1.4.1.207.8.33.7.1.1.16

MIB view Table view

Object

column obsolete r/w Enumeration

This per-port attribute allows the configuration of 
the Tag Priority to be Override or Use the Tag 
Priority. By Default, all ports use Vlan Tag priority.

Context

MIB: AtiL2-MIB
OID: .1.3.6.1.4.1.207.8.33.7.1.1.16
Type: column
Access: readwrite
Status: obsolete
Parent: atiL2DevicePortEntry
Table: atiL2DevicePortTable
Siblings: 16

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	use-vlan-priority
`2`	override-vlan-priority

Related Objects

Sibling Objects

Object	Type	Syntax	OID
atiL2DeviceId mandatory This object identifies the Module Id of the switch Stack.	column	Integer32	`.1.3.6.1.4.1.207.8.33.7.1.1.1`
atiL2DevicePortSTPConfig mandatory This attribute allows a bridging Mode to be configured with either Spanning Tree enabled or disabled. When Spanning tree is enabled, make sure that this port is belonging to a …	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.10`
atiL2DevicePortBridgeid mandatory The Bridge to which this port belongs to.	column	Integer32	`.1.3.6.1.4.1.207.8.33.7.1.1.11`
atiL2DevicePortSTPCost mandatory The Cost of the Spanning Tree Protocol.This object is valid only when STP is enabled.	column	Integer32	`.1.3.6.1.4.1.207.8.33.7.1.1.12`
atiL2DevicePortSTPPriority mandatory The Priority of the spanning Tree Protocol. This object is valid when STP is enabled.	column	Integer32	`.1.3.6.1.4.1.207.8.33.7.1.1.13`
atiL2DevicePortFlowControlEnable obsolete This per-port attribute describes whether the port identified has flow Control Enabled or not. Flow Control on Full Duplex and Half Duplex is detected and automatically, flow c…	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.14`
atiL2DevicePortBackPressureEnable obsolete This per-port attribute describes whether the port identified has Back Pressure Enabled or not. By Default, Back Pressure is Disabled.	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.15`
atiL2DevicePortQOSPriorityConfig obsolete This per-port attribute is applicable only to at-8324, at-8124XL-V2 and at-8316 and it allows for the configuration of the Priority of the port to be high or Low. In a switch e…	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.17`
atiL2DevicePortNumber mandatory This object identifies the Port on atiL2ModuleId of the switch Stack.	column	Integer32	`.1.3.6.1.4.1.207.8.33.7.1.1.2`
atiL2DevicePortName mandatory This attribute associates a user defined string name with the port.	column	OctetString	`.1.3.6.1.4.1.207.8.33.7.1.1.3`
atiL2DevicePortAutosenseOrHalfDuplex mandatory This attribute allows an administrative request to configure whether this port can Autosense or Force the Half Duplex or Full Duplex on different Port Speeds.	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.4`
atiL2DevicePortLinkState mandatory This attribute allows an administrative request to read the status of link state on this port.	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.5`
atiL2DevicePortDuplexStatus mandatory This attribute allows an administrative request to read the status of Duplex on this port.	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.6`
atiL2DevicePortSpeed mandatory This attribute allows an administrative request to read or write the speed of this port. This Object is valid only for 10/100Mbits and gigaBits ports. The only gigabit port that…	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.7`
atiL2DevicePortState mandatory This attribute allows an administrative request to disable or enable communications on this port.It also responds with the status of the port .Except enabled(1) and disabled(2),…	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.8`
atiL2DevicePortTransmitPacingConfig mandatory This Object is supported on at36XX product line Only. This attribute allows the transmit Pacing to be enabled or disabled.	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.9`