atiL2DevicePortState

AtiL2-MIB · .1.3.6.1.4.1.207.8.33.7.1.1.8

MIB view Table view

Object

column mandatory r/w Enumeration

This attribute allows an administrative request to 
disable or enable communications on this port.It also 
responds with the status of the port .Except enabled(1) and
disabled(2), all values are read-only status.

Context

MIB: AtiL2-MIB
OID: .1.3.6.1.4.1.207.8.33.7.1.1.8
Type: column
Access: readwrite
Status: mandatory
Parent: atiL2DevicePortEntry
Table: atiL2DevicePortTable
Siblings: 16

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	enabled
`2`	disabled
`3`	blocking
`4`	listening
`5`	learning

Related Objects

Sibling Objects

Object	Type	Syntax	OID
atiL2DeviceId mandatory This object identifies the Module Id of the switch Stack.	column	Integer32	`.1.3.6.1.4.1.207.8.33.7.1.1.1`
atiL2DevicePortSTPConfig mandatory This attribute allows a bridging Mode to be configured with either Spanning Tree enabled or disabled. When Spanning tree is enabled, make sure that this port is belonging to a …	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.10`
atiL2DevicePortBridgeid mandatory The Bridge to which this port belongs to.	column	Integer32	`.1.3.6.1.4.1.207.8.33.7.1.1.11`
atiL2DevicePortSTPCost mandatory The Cost of the Spanning Tree Protocol.This object is valid only when STP is enabled.	column	Integer32	`.1.3.6.1.4.1.207.8.33.7.1.1.12`
atiL2DevicePortSTPPriority mandatory The Priority of the spanning Tree Protocol. This object is valid when STP is enabled.	column	Integer32	`.1.3.6.1.4.1.207.8.33.7.1.1.13`
atiL2DevicePortFlowControlEnable obsolete This per-port attribute describes whether the port identified has flow Control Enabled or not. Flow Control on Full Duplex and Half Duplex is detected and automatically, flow c…	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.14`
atiL2DevicePortBackPressureEnable obsolete This per-port attribute describes whether the port identified has Back Pressure Enabled or not. By Default, Back Pressure is Disabled.	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.15`
atiL2DevicePortVlanTagPriorityConfig obsolete This per-port attribute allows the configuration of the Tag Priority to be Override or Use the Tag Priority. By Default, all ports use Vlan Tag priority.	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.16`
atiL2DevicePortQOSPriorityConfig obsolete This per-port attribute is applicable only to at-8324, at-8124XL-V2 and at-8316 and it allows for the configuration of the Priority of the port to be high or Low. In a switch e…	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.17`
atiL2DevicePortNumber mandatory This object identifies the Port on atiL2ModuleId of the switch Stack.	column	Integer32	`.1.3.6.1.4.1.207.8.33.7.1.1.2`
atiL2DevicePortName mandatory This attribute associates a user defined string name with the port.	column	OctetString	`.1.3.6.1.4.1.207.8.33.7.1.1.3`
atiL2DevicePortAutosenseOrHalfDuplex mandatory This attribute allows an administrative request to configure whether this port can Autosense or Force the Half Duplex or Full Duplex on different Port Speeds.	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.4`
atiL2DevicePortLinkState mandatory This attribute allows an administrative request to read the status of link state on this port.	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.5`
atiL2DevicePortDuplexStatus mandatory This attribute allows an administrative request to read the status of Duplex on this port.	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.6`
atiL2DevicePortSpeed mandatory This attribute allows an administrative request to read or write the speed of this port. This Object is valid only for 10/100Mbits and gigaBits ports. The only gigabit port that…	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.7`
atiL2DevicePortTransmitPacingConfig mandatory This Object is supported on at36XX product line Only. This attribute allows the transmit Pacing to be enabled or disabled.	column	Enumeration	`.1.3.6.1.4.1.207.8.33.7.1.1.9`