atiL2DevicePortSTPConfig

AtiL2-MIB · .1.3.6.1.4.1.207.8.33.7.1.1.10
MIB view Table view

Object

column mandatory r/w Enumeration 
This attribute allows a bridging Mode to be configured 
with either Spanning Tree enabled or disabled. When 
Spanning tree is enabled, make sure that this port is 
belonging to a valid Bridge_id. Spanning Tree is 
enabled only when a valid Bridge_id is set.

Context

MIB
AtiL2-MIB
OID
.1.3.6.1.4.1.207.8.33.7.1.1.10
Type
column
Access
readwrite
Status
mandatory
Parent
atiL2DevicePortEntry
Table
atiL2DevicePortTable
Siblings
16

Syntax

Enumeration

Values & Constraints

Enumerated Values
1enable
2disable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
atiL2DeviceId mandatory
This object identifies the Module Id of the switch Stack.
columnInteger32.1.3.6.1.4.1.207.8.33.7.1.1.1
atiL2DevicePortBridgeid mandatory
The Bridge to which this port belongs to.
columnInteger32.1.3.6.1.4.1.207.8.33.7.1.1.11
atiL2DevicePortSTPCost mandatory
The Cost of the Spanning Tree Protocol.This object is valid only when STP is enabled.
columnInteger32.1.3.6.1.4.1.207.8.33.7.1.1.12
atiL2DevicePortSTPPriority mandatory
The Priority of the spanning Tree Protocol. This object is valid when STP is enabled.
columnInteger32.1.3.6.1.4.1.207.8.33.7.1.1.13
atiL2DevicePortFlowControlEnable obsolete
This per-port attribute describes whether the port identified has flow Control Enabled or not. Flow Control on Full Duplex and Half Duplex is detected and automatically, flow c…
columnEnumeration.1.3.6.1.4.1.207.8.33.7.1.1.14
atiL2DevicePortBackPressureEnable obsolete
This per-port attribute describes whether the port identified has Back Pressure Enabled or not. By Default, Back Pressure is Disabled.
columnEnumeration.1.3.6.1.4.1.207.8.33.7.1.1.15
atiL2DevicePortVlanTagPriorityConfig obsolete
This per-port attribute allows the configuration of the Tag Priority to be Override or Use the Tag Priority. By Default, all ports use Vlan Tag priority.
columnEnumeration.1.3.6.1.4.1.207.8.33.7.1.1.16
atiL2DevicePortQOSPriorityConfig obsolete
This per-port attribute is applicable only to at-8324, at-8124XL-V2 and at-8316 and it allows for the configuration of the Priority of the port to be high or Low. In a switch e…
columnEnumeration.1.3.6.1.4.1.207.8.33.7.1.1.17
atiL2DevicePortNumber mandatory
This object identifies the Port on atiL2ModuleId of the switch Stack.
columnInteger32.1.3.6.1.4.1.207.8.33.7.1.1.2
atiL2DevicePortName mandatory
This attribute associates a user defined string name with the port.
columnOctetString.1.3.6.1.4.1.207.8.33.7.1.1.3
atiL2DevicePortAutosenseOrHalfDuplex mandatory
This attribute allows an administrative request to configure whether this port can Autosense or Force the Half Duplex or Full Duplex on different Port Speeds.
columnEnumeration.1.3.6.1.4.1.207.8.33.7.1.1.4
atiL2DevicePortLinkState mandatory
This attribute allows an administrative request to read the status of link state on this port.
columnEnumeration.1.3.6.1.4.1.207.8.33.7.1.1.5
atiL2DevicePortDuplexStatus mandatory
This attribute allows an administrative request to read the status of Duplex on this port.
columnEnumeration.1.3.6.1.4.1.207.8.33.7.1.1.6
atiL2DevicePortSpeed mandatory
This attribute allows an administrative request to read or write the speed of this port. This Object is valid only for 10/100Mbits and gigaBits ports. The only gigabit port that…
columnEnumeration.1.3.6.1.4.1.207.8.33.7.1.1.7
atiL2DevicePortState mandatory
This attribute allows an administrative request to disable or enable communications on this port.It also responds with the status of the port .Except enabled(1) and disabled(2),…
columnEnumeration.1.3.6.1.4.1.207.8.33.7.1.1.8
atiL2DevicePortTransmitPacingConfig mandatory
This Object is supported on at36XX product line Only. This attribute allows the transmit Pacing to be enabled or disabled.
columnEnumeration.1.3.6.1.4.1.207.8.33.7.1.1.9