atiL2DeviceId
AtiL2-MIB ·
.1.3.6.1.4.1.207.8.33.7.1.1.1
Object
column
mandatory
Integer32
This object identifies the Module Id of the switch Stack.
Context
- MIB
- AtiL2-MIB
- OID
.1.3.6.1.4.1.207.8.33.7.1.1.1- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- atiL2DevicePortEntry
- Table
- atiL2DevicePortTable
- Siblings
- 16
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atiL2DevicePortSTPConfig mandatory This attribute allows a bridging Mode to be configured
with either Spanning Tree enabled or disabled. When
Spanning tree is enabled, make sure that this port is
belonging to a … | column | Enumeration | .1.3.6.1.4.1.207.8.33.7.1.1.10 |
| atiL2DevicePortBridgeid mandatory The Bridge to which this port belongs to. | column | Integer32 | .1.3.6.1.4.1.207.8.33.7.1.1.11 |
| atiL2DevicePortSTPCost mandatory The Cost of the Spanning Tree Protocol.This object
is valid only when STP is enabled. | column | Integer32 | .1.3.6.1.4.1.207.8.33.7.1.1.12 |
| atiL2DevicePortSTPPriority mandatory The Priority of the spanning Tree Protocol.
This object is valid when STP is enabled. | column | Integer32 | .1.3.6.1.4.1.207.8.33.7.1.1.13 |
| atiL2DevicePortFlowControlEnable obsolete This per-port attribute describes whether the port
identified has flow Control Enabled or not. Flow
Control on Full Duplex and Half Duplex is detected
and automatically, flow c… | column | Enumeration | .1.3.6.1.4.1.207.8.33.7.1.1.14 |
| atiL2DevicePortBackPressureEnable obsolete This per-port attribute describes whether the port
identified has Back Pressure Enabled or not. By
Default, Back Pressure is Disabled. | column | Enumeration | .1.3.6.1.4.1.207.8.33.7.1.1.15 |
| atiL2DevicePortVlanTagPriorityConfig obsolete This per-port attribute allows the configuration of
the Tag Priority to be Override or Use the Tag
Priority. By Default, all ports use Vlan Tag priority. | column | Enumeration | .1.3.6.1.4.1.207.8.33.7.1.1.16 |
| atiL2DevicePortQOSPriorityConfig obsolete This per-port attribute is applicable only to
at-8324, at-8124XL-V2 and at-8316 and it allows for
the configuration of the Priority of the port to be
high or Low. In a switch e… | column | Enumeration | .1.3.6.1.4.1.207.8.33.7.1.1.17 |
| atiL2DevicePortNumber mandatory This object identifies the Port on atiL2ModuleId of
the switch Stack. | column | Integer32 | .1.3.6.1.4.1.207.8.33.7.1.1.2 |
| atiL2DevicePortName mandatory This attribute associates a user defined string name
with the port. | column | OctetString | .1.3.6.1.4.1.207.8.33.7.1.1.3 |
| atiL2DevicePortAutosenseOrHalfDuplex mandatory This attribute allows an administrative request to
configure whether this port can Autosense or Force
the Half Duplex or Full Duplex on different Port
Speeds. | column | Enumeration | .1.3.6.1.4.1.207.8.33.7.1.1.4 |
| atiL2DevicePortLinkState mandatory This attribute allows an administrative request to
read the status of link state on this port. | column | Enumeration | .1.3.6.1.4.1.207.8.33.7.1.1.5 |
| atiL2DevicePortDuplexStatus mandatory This attribute allows an administrative request to
read the status of Duplex on this port. | column | Enumeration | .1.3.6.1.4.1.207.8.33.7.1.1.6 |
| atiL2DevicePortSpeed mandatory This attribute allows an administrative request to
read or write the speed of this port. This Object
is valid only for 10/100Mbits and gigaBits ports.
The only gigabit port that… | column | Enumeration | .1.3.6.1.4.1.207.8.33.7.1.1.7 |
| atiL2DevicePortState mandatory This attribute allows an administrative request to
disable or enable communications on this port.It also
responds with the status of the port .Except enabled(1) and
disabled(2),… | column | Enumeration | .1.3.6.1.4.1.207.8.33.7.1.1.8 |
| atiL2DevicePortTransmitPacingConfig mandatory This Object is supported on at36XX product line Only.
This attribute allows the transmit Pacing to be
enabled or disabled. | column | Enumeration | .1.3.6.1.4.1.207.8.33.7.1.1.9 |