atiL2BrStpHelloTime

AtiL2-MIB · .1.3.6.1.4.1.207.8.33.10.2.1.1.10
MIB view Table view

Object

column mandatory Timeout 
The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.

Context

MIB
AtiL2-MIB
OID
.1.3.6.1.4.1.207.8.33.10.2.1.1.10
Type
column
Access
readonly
Status
mandatory
Parent
atiL2BrStpEntry
Table
atiL2BrStpTable
Siblings
14

Syntax

Timeout
Source
Timeout
Base type
Integer32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
atiL2BrStpLanId mandatory
This object uniquely identifies the lan or Virtual lan.
columnInteger32.1.3.6.1.4.1.207.8.33.10.2.1.1.1
atiL2BrStpHoldTime mandatory
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
columnInteger32.1.3.6.1.4.1.207.8.33.10.2.1.1.11
atiL2BrStpForwardDelay mandatory
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines h…
columnTimeout.1.3.6.1.4.1.207.8.33.10.2.1.1.12
atiL2BrStpBridgeMaxAge mandatory
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of ati…
columnInteger32.1.3.6.1.4.1.207.8.33.10.2.1.1.13
atiL2BrStpBridgeHelloTime mandatory
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may retu…
columnInteger32.1.3.6.1.4.1.207.8.33.10.2.1.1.14
atiL2BrStpBridgeForwardDelay mandatory
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value …
columnInteger32.1.3.6.1.4.1.207.8.33.10.2.1.1.15
atiL2BrStpProtocolSpecification mandatory
An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementat…
columnEnumeration.1.3.6.1.4.1.207.8.33.10.2.1.1.2
atiL2BrStpPriority mandatory
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the valu…
columnInteger32.1.3.6.1.4.1.207.8.33.10.2.1.1.3
atiL2BrStpTimeSinceTopologyChange mandatory
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
columnRFC1155-SMITimeTicks.1.3.6.1.4.1.207.8.33.10.2.1.1.4
atiL2BrStpTopChanges mandatory
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
columnRFC1155-SMICounter.1.3.6.1.4.1.207.8.33.10.2.1.1.5
atiL2BrStpDesignatedRoot mandatory
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter i…
columnBridgeId.1.3.6.1.4.1.207.8.33.10.2.1.1.6
atiL2BrStpRootCost mandatory
The cost of the path to the root as seen from this bridge.
columnInteger32.1.3.6.1.4.1.207.8.33.10.2.1.1.7
atiL2BrStpRootPort mandatory
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
columnInteger32.1.3.6.1.4.1.207.8.33.10.2.1.1.8
atiL2BrStpMaxAge mandatory
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value th…
columnTimeout.1.3.6.1.4.1.207.8.33.10.2.1.1.9