atiL2BrStpBridgeMaxAge

AtiL2-MIB · .1.3.6.1.4.1.207.8.33.10.2.1.1.13

MIB view Table view

Object

column mandatory r/w Integer32

The value that all bridges use for MaxAge when
this bridge is acting as the root.  Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
atiL2BrStpBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.

Context

MIB: AtiL2-MIB
OID: .1.3.6.1.4.1.207.8.33.10.2.1.1.13
Type: column
Access: readwrite
Status: mandatory
Parent: atiL2BrStpEntry
Table: atiL2BrStpTable
Siblings: 14

Syntax

Integer32

Values & Constraints

Object Constraints

range: 600-4000

Related Objects

Sibling Objects

Object	Type	Syntax	OID
atiL2BrStpLanId mandatory This object uniquely identifies the lan or Virtual lan.	column	Integer32	`.1.3.6.1.4.1.207.8.33.10.2.1.1.1`
atiL2BrStpHelloTime mandatory The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hund…	column	Timeout	`.1.3.6.1.4.1.207.8.33.10.2.1.1.10`
atiL2BrStpHoldTime mandatory This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.	column	Integer32	`.1.3.6.1.4.1.207.8.33.10.2.1.1.11`
atiL2BrStpForwardDelay mandatory This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines h…	column	Timeout	`.1.3.6.1.4.1.207.8.33.10.2.1.1.12`
atiL2BrStpBridgeHelloTime mandatory The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may retu…	column	Integer32	`.1.3.6.1.4.1.207.8.33.10.2.1.1.14`
atiL2BrStpBridgeForwardDelay mandatory The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value …	column	Integer32	`.1.3.6.1.4.1.207.8.33.10.2.1.1.15`
atiL2BrStpProtocolSpecification mandatory An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementat…	column	Enumeration	`.1.3.6.1.4.1.207.8.33.10.2.1.1.2`
atiL2BrStpPriority mandatory The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the valu…	column	Integer32	`.1.3.6.1.4.1.207.8.33.10.2.1.1.3`
atiL2BrStpTimeSinceTopologyChange mandatory The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.	column	RFC1155-SMITimeTicks	`.1.3.6.1.4.1.207.8.33.10.2.1.1.4`
atiL2BrStpTopChanges mandatory The total number of topology changes detected by this bridge since the management entity was last reset or initialized.	column	RFC1155-SMICounter	`.1.3.6.1.4.1.207.8.33.10.2.1.1.5`
atiL2BrStpDesignatedRoot mandatory The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter i…	column	BridgeId	`.1.3.6.1.4.1.207.8.33.10.2.1.1.6`
atiL2BrStpRootCost mandatory The cost of the path to the root as seen from this bridge.	column	Integer32	`.1.3.6.1.4.1.207.8.33.10.2.1.1.7`
atiL2BrStpRootPort mandatory The port number of the port which offers the lowest cost path from this bridge to the root bridge.	column	Integer32	`.1.3.6.1.4.1.207.8.33.10.2.1.1.8`
atiL2BrStpMaxAge mandatory The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value th…	column	Timeout	`.1.3.6.1.4.1.207.8.33.10.2.1.1.9`