fsMIDot1qFutureRSPANRsvdVlanList
AricentMIVlan-MIB ·
.1.3.6.1.4.1.2076.120.1.2.1.23
Object
column
r/w
OctetString
This object identifies the list of VLANs that are reserved for RSPAN
feature.
The first octet corresponds to VLANs with VlanId values
1 through 8; the second octet corresponds to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VLAN ID in that octet.
The least significant bit represents the highest VLAN ID.
When VLANs are reserved through this object then following properties
are applicable:
- MAC learning is disabled for this VLAN.
- Reserved VLAN which is used for RSPAN should not be used for any
other functionality.
- Ports participating in RSPAN VLAN should be tagged ports to
connect to the remote device across network.
When VLANs are removed from this reservation list then RSPAN properties
on those VLANs will be removed and converted back to normal VLAN.
Re-configuring VLAN list will always overwrite the exiting list of VLANs
and the newly configured list of VLANs will be functional. Also in case
of reconfiguration, if any VLAN in the existing reserved VLAN list is
been used in any mirroring session, then overwriting will be restricted.
Context
- MIB
- AricentMIVlan-MIB
- OID
.1.3.6.1.4.1.2076.120.1.2.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIDot1qFutureVlanGlobalsEntry
- Table
- fsMIDot1qFutureVlanGlobalsTable
- Siblings
- 22
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-512
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIDot1qFutureVlanContextId Identifies the virtual context in the system. | column | Integer32 | .1.3.6.1.4.1.2076.120.1.2.1.1 |
| fsMIDot1qFutureVlanOperStatus The operational status of the Vlan module.
The value enabled(1) indicates that Vlan module is currently enabled
in the device.
The value disabled(2) indicates that Vlan module… | column | EnabledStatus | .1.3.6.1.4.1.2076.120.1.2.1.10 |
| fsMIDot1qFutureGvrpOperStatus The operational status of the GVRP module.
The value enabled(1) indicates that GVRP module is currently enabled
in the device.
The value disabled(2) indicates that GVRP module… | column | EnabledStatus | .1.3.6.1.4.1.2076.120.1.2.1.11 |
| fsMIDot1qFutureGmrpOperStatus The operational status of the GMRP module.
The value enabled(1) indicates that GMRP module is currently enabled
in the device.
The value disabled(2) indicates that GMRP module… | column | EnabledStatus | .1.3.6.1.4.1.2076.120.1.2.1.12 |
| fsMIDot1qFutureVlanContextName The name of the virtual context. | column | OctetString | .1.3.6.1.4.1.2076.120.1.2.1.13 |
| fsMIDot1qFutureGarpDebug Enables the tracing in the selected submodule in GARP. A 32 bit
integer is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initial… | column | Integer32 | .1.3.6.1.4.1.2076.120.1.2.1.14 |
| fsMIDot1qFutureUnicastMacLearningLimit The Limiting value on the number of distinct unicast MAC addresses
that can be learnt in the specified virtual context.
The upper limit value that can be SET for th… | column | Unsigned32 | .1.3.6.1.4.1.2076.120.1.2.1.15 |
| fsMIDot1qFutureBaseBridgeMode This object indicates Base Bridge-Mode of the Switch.
Setting the value to transparent mode will make
switch behave according to IEEE 802.1d implementation.
Setting the value to V… | column | Enumeration | .1.3.6.1.4.1.2076.120.1.2.1.16 |
| fsMIDot1qFutureVlanSubnetBasedOnAllPorts This object is used to enable/disable the subnet based VLAN Classification
on all ports of dot1qFutureVlanPortSubnetBasedClassification. On setting
this object to enable/disable s… | column | EnabledStatus | .1.3.6.1.4.1.2076.120.1.2.1.17 |
| fsMIDot1qFutureVlanGlobalMacLearningStatus This object specifies the global MAC learning status of the
switch. The default value of global mac learning status of
the switch is enabled.
This object can take only two values… | column | EnabledStatus | .1.3.6.1.4.1.2076.120.1.2.1.18 |
| fsMIDot1qFutureVlanApplyEnhancedFilteringCriteria If this object is set as 'false', then only default filtering
utility criteria will be applied on all ports in this context.
Otherwise the filtering criteria to be used for the po… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.120.1.2.1.19 |
| fsMIDot1qFutureVlanStatus The administrative status requested by management for the Vlan
feature. The value enabled(1) indicates that Vlan should be enabled
in the device on all ports. The value disable… | column | EnabledStatus | .1.3.6.1.4.1.2076.120.1.2.1.2 |
| fsMIDot1qFutureVlanGlobalsFdbFlush If this object is set as 'true', then all the dynamically learnt
MAC addresses in this context are removed.After flush this object
is set to 'false' | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.120.1.2.1.20 |
| fsMIDot1qFutureVlanUserDefinedTPID This object sets the value for the user defined TPID configurable
for an Ingress port or for a VLAN Egress Ethertype.
A value ZERO deletes the configured entry. | column | Integer32 | .1.3.6.1.4.1.2076.120.1.2.1.21 |
| fsMIDot1qFutureVlanRemoteFdbFlush If this object is set as 'true', then all the MAC addresses
learnt from remote MC-LAG node will be removed. After flush, this object
is reset to 'false'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.120.1.2.1.22 |
| fsMIDot1qFutureVlanMacBasedOnAllPorts This object is only used to enable/disable the mac based type on all
ports of fsMIDot1qFutureVlanPortMacBasedClassification | column | EnabledStatus | .1.3.6.1.4.1.2076.120.1.2.1.3 |
| fsMIDot1qFutureVlanPortProtoBasedOnAllPorts This object is only used to enable/disable the port protocol based
type on all ports of
fsMIDot1qFutureVlanPortPortProtoBasedClassification | column | EnabledStatus | .1.3.6.1.4.1.2076.120.1.2.1.4 |
| fsMIDot1qFutureVlanShutdownStatus deprecated The administrative shutdown status requested by management for Vlan
The value true(1) indicates that Vlan should be shutdown
in the device on all ports. All memory will be rel… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.120.1.2.1.5 |
| fsMIDot1qFutureGarpShutdownStatus The administrative status requested by management for GARP
The value true(1) indicates that GARP should be shutdown
in the device on all ports. All memory will be released.
T… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.120.1.2.1.6 |
| fsMIDot1qFutureVlanDebug Enables the tracing in the selected submodule in VLAN. A 32 bit
integer is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initial… | column | Integer32 | .1.3.6.1.4.1.2076.120.1.2.1.7 |
| fsMIDot1qFutureVlanLearningMode The Type of VLAN learning mode.
When the object value is modified, the static
fid-vlan mappings and static unicast entries
need to be reconfigured. Static unicast configurations
… | column | Enumeration | .1.3.6.1.4.1.2076.120.1.2.1.8 |
| fsMIDot1qFutureVlanHybridTypeDefault The default learning mode of the switch if
fsMIDot1qFutureVlanLearningMode is hvl (3).
When the object value is modified, the static
fid-vlan mappings and static unicast entries
… | column | Enumeration | .1.3.6.1.4.1.2076.120.1.2.1.9 |