fsMplsRouterID
Aricent-MPLS-MIB ·
.1.3.6.1.4.1.2076.13.1.5.1.9
Object
scalar
r/w
OctetString
This object denotes the MPLS router Identifier. This Identifier is used in identifying the router for OAM operations.
Context
- MIB
- Aricent-MPLS-MIB
- OID
.1.3.6.1.4.1.2076.13.1.5.1.9- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fsMplsL2VpnConfigObjects
- Siblings
- 11
Syntax
OctetString
Values & Constraints
Object Constraints
range: 4-4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMplsL2VpnTrcFlag This is a 4-byte (32-bit) object with each bit enabling/disabling a
particular type of trace/debug statement. Following is the convention
followed.
|<------------ 32 b… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.13.1.5.1.1 |
| fsMplsHwCCTypeCapabilities This object indicates the Control channel capability supported by hardware.
The value of this object is obtained from the NP layer. | scalar | PwCcTypesCapabilities | .1.3.6.1.4.1.2076.13.1.5.1.10 |
| fsMplsPortTable This table is used for the Port related configuration on MPLS.
All the objects in this table are applicable for UNI ports only. | table | - | .1.3.6.1.4.1.2076.13.1.5.1.11 |
| fsMplsVplsAcMapTable This table is used to store AC vs VPLS mapping.
This table is used in case of Auto discovered VPLS only.
For manual VPLS pwEnetTable is used to store AC info. | table | - | .1.3.6.1.4.1.2076.13.1.5.1.12 |
| fsMplsL2VpnCleanupInterval The Cleanup time interval value will be in terms of thousandths of a second.
This determines how long the peer label information can be kept
waiting for local configuration.The PW… | scalar | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.2076.13.1.5.1.2 |
| fsMplsL2VpnAdminStatus Field indicates the status of the L2VPN functionality.
When the value is set to UP, required resource will be
allocated and L2VPN functionality will be started.
When made down fro… | scalar | Enumeration | .1.3.6.1.4.1.2076.13.1.5.1.3 |
| fsMplsL2VpnPwTable This table is an extension to pw Table for configuring the mode
of Pseudowire | table | - | .1.3.6.1.4.1.2076.13.1.5.1.4 |
| fsMplsVplsConfigTable This table specifies information for configuring
and monitoring Virtual Private Lan Services(VPLS). | table | - | .1.3.6.1.4.1.2076.13.1.5.1.5 |
| fsPwMplsInboundTable This table reports and configure the current inbound MPLS
tunnels (i.e. Egress Tunnels). This table is to be used only
in case of pwMplsType TE. It also reports the current
in… | table | - | .1.3.6.1.4.1.2076.13.1.5.1.6 |
| fsMplsLocalCCTypesCapabilities This object denotes the configured control channel type capabilities that
are used to demultiplex the incoming VCCV control packets.
Configuration of this object is o… | scalar | PwCcTypesCapabilities | .1.3.6.1.4.1.2076.13.1.5.1.7 |
| fsMplsLocalCVTypesCapabilities This object denotes the configured connectivity verification types of the local node
that are used to demultiplex the incoming VCCV control packets.
Configuration of … | scalar | PwCvTypesCapabilities | .1.3.6.1.4.1.2076.13.1.5.1.8 |