fsMplsL2VpnTrcFlag

Aricent-MPLS-MIB · .1.3.6.1.4.1.2076.13.1.5.1.1

Object

scalar r/w SNMPv2-SMIInteger32

This is a 4-byte (32-bit) object with each bit enabling/disabling a 
particular type of trace/debug statement. Following is the convention
followed.
          
|<------------ 32 bits ------------>|
+--------+--------+--------+--------+
|00000000|00000000|00000000|00000000|
+--------+--------+--------+--------+
  CPT      VCCV     Func     Levels
            GR
          
00000000  00000000  00000000  00000001 - Level One Critical Trace
00000000  00000000  00000000  00000011 - Level Two Error Trace that includes
                                         level One
00000000  00000000  00000000  00000111 - Level Three Debug Trace that includes
                                         level One and level Two
          
          
00000000  00000000  00000001  00000000 - Signalling Functional Traces
00000000  00000000  00000010  00000000 - Session Functional Traces
00000000  00000000  00000100  00000000 - VC Functional Traces
00000000  00000000  00001000  00000000 - Critical Functional Traces
          
          
01000000  00000000  00000000  00000000 - Debug Messages for Packet Rx
00100000  00000000  00000000  00000000 - Debug Messages for Packet Tx
01100000  00000000  00000000  00000000 - Debug Messages for Packet Tx and Rx
          
00000000  00000001  00000000  00000000 - VCCV critical debug statements
00000000  00000010  00000000  00000000 - VCCV management configuration
00000000  00000100  00000000  00000000 - VCCV capability exchange and selection
00000000  00001000  00000000  00000000 - Graceful Restart related debug Statements

Context

MIB: Aricent-MPLS-MIB
OID: .1.3.6.1.4.1.2076.13.1.5.1.1
Type: scalar
Access: readwrite
Status: current
Parent: fsMplsL2VpnConfigObjects
Siblings: 11

Syntax

SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsMplsHwCCTypeCapabilities This object indicates the Control channel capability supported by hardware. The value of this object is obtained from the NP layer.	scalar	PwCcTypesCapabilities	`.1.3.6.1.4.1.2076.13.1.5.1.10`
fsMplsPortTable This table is used for the Port related configuration on MPLS. All the objects in this table are applicable for UNI ports only.	table	-	`.1.3.6.1.4.1.2076.13.1.5.1.11`
fsMplsVplsAcMapTable This table is used to store AC vs VPLS mapping. This table is used in case of Auto discovered VPLS only. For manual VPLS pwEnetTable is used to store AC info.	table	-	`.1.3.6.1.4.1.2076.13.1.5.1.12`
fsMplsL2VpnCleanupInterval The Cleanup time interval value will be in terms of thousandths of a second. This determines how long the peer label information can be kept waiting for local configuration.The PW…	scalar	SNMPv2-TCTimeInterval	`.1.3.6.1.4.1.2076.13.1.5.1.2`
fsMplsL2VpnAdminStatus Field indicates the status of the L2VPN functionality. When the value is set to UP, required resource will be allocated and L2VPN functionality will be started. When made down fro…	scalar	Enumeration	`.1.3.6.1.4.1.2076.13.1.5.1.3`
fsMplsL2VpnPwTable This table is an extension to pw Table for configuring the mode of Pseudowire	table	-	`.1.3.6.1.4.1.2076.13.1.5.1.4`
fsMplsVplsConfigTable This table specifies information for configuring and monitoring Virtual Private Lan Services(VPLS).	table	-	`.1.3.6.1.4.1.2076.13.1.5.1.5`
fsPwMplsInboundTable This table reports and configure the current inbound MPLS tunnels (i.e. Egress Tunnels). This table is to be used only in case of pwMplsType TE. It also reports the current in…	table	-	`.1.3.6.1.4.1.2076.13.1.5.1.6`
fsMplsLocalCCTypesCapabilities This object denotes the configured control channel type capabilities that are used to demultiplex the incoming VCCV control packets. Configuration of this object is o…	scalar	PwCcTypesCapabilities	`.1.3.6.1.4.1.2076.13.1.5.1.7`
fsMplsLocalCVTypesCapabilities This object denotes the configured connectivity verification types of the local node that are used to demultiplex the incoming VCCV control packets. Configuration of …	scalar	PwCvTypesCapabilities	`.1.3.6.1.4.1.2076.13.1.5.1.8`
fsMplsRouterID This object denotes the MPLS router Identifier. This Identifier is used in identifying the router for OAM operations.	scalar	OctetString	`.1.3.6.1.4.1.2076.13.1.5.1.9`