fsMIRstFlushInterval
Aricent-MIRSTP-MIB ·
.1.3.6.1.4.1.2076.119.1.3.1.21
Object
column
r/w
centi-seconds Integer32
This object specifies the time value, measured in units of hundredths of a second, controls the number of flush indications invoked from RSTP module. If set to zero, then normal port based flushing will take place in RSTP (for backward compatibility, which will be retained as default value). If set to non-zero, then global/port based flushing will be done based on the fsMIRstFlushIndicationThreshold value. This scale would help to adjust the timer value, based on the deployment scenario.
Context
- MIB
- Aricent-MIRSTP-MIB
- OID
.1.3.6.1.4.1.2076.119.1.3.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Units
- centi-seconds
- Parent
- fsMIDot1wFutureRstEntry
- Table
- fsMIDot1wFutureRstTable
- Siblings
- 26
Syntax
centi-seconds Integer32
Values & Constraints
Object Constraints
range: 0-500
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIDot1wFutureRstContextId Identifies the Virtual Bridge Context. | column | Integer32 | .1.3.6.1.4.1.2076.119.1.3.1.1 |
| fsMIRstNewRootIdCount This object specifies the number of times this Bridge has detected a new
Root in the topology.
A Trap is generated on the occurrence of this event. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.119.1.3.1.10 |
| fsMIRstPortRoleSelSmState This object specifies the current state of the Port Role Selection State
Machine. This object will hold the value 'initbridge' when the
Port Role Selection state machine is in t… | column | Enumeration | .1.3.6.1.4.1.2076.119.1.3.1.11 |
| fsMIRstOldDesignatedRoot This object specifies the bridge identifier of the old root of
the spanning tree as determined by the Spanning Tree Protocol
as executed by this node. | column | ARICENT-MIStdBRIDGE-MIBBridgeId | .1.3.6.1.4.1.2076.119.1.3.1.12 |
| fsMIRstDynamicPathcostCalculation This object is used to determine whether dynamic pathcost
calculation is allowed or not.The value is determined by
management. If set to true, pathcost is calculated dynamically … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.119.1.3.1.13 |
| fsMIRstContextName This object is used to identity the context-name. | column | OctetString | .1.3.6.1.4.1.2076.119.1.3.1.14 |
| fsMIRstCalcPortPathCostOnSpeedChg This object is used to determine whether dynamic pathcost
calculation is done for a port for which Port Speed is changing
dynamically. This is mainly intended for Link Aggregated … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.119.1.3.1.15 |
| fsMIRstClearBridgeStats This object is used to clear the statistical counters.When this
object is set to TRUE,it resets the bridge specific counters
and all the interface associated counters to zero… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.119.1.3.1.16 |
| fsMIRstRcvdEvent This object specifies the information about the recently received
event in the system.Currently we support only ConfigurationEvent. | column | Enumeration | .1.3.6.1.4.1.2076.119.1.3.1.17 |
| fsMIRstRcvdEventSubType This object specifies information about sub-type of the event received
in the system recently. The value of this object depends on the value
of the object fsRstRcvdEvent.For Con… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.119.1.3.1.18 |
| fsMIRstRcvdEventTimeStamp This object specifies the time stamp (in milli seconds) at which event
specified by the object fsRstRcvdEvent was received in the system at STP
module for the last time. This obje… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.119.1.3.1.19 |
| fsMIRstSystemControl This object specifies the administrative system control status
requested by management for the RSTP feature. The value 'start'(1)
indicates that all resources required by RSTP sh… | column | Enumeration | .1.3.6.1.4.1.2076.119.1.3.1.2 |
| fsMIRstRcvdPortStateChangeTimeStamp This object specifies time stamp (in milli seconds) at which port state
has been changed in the system. This object is introduced to measure the
convergence time in RSTP module. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.119.1.3.1.20 |
| fsMIRstFlushIndicationThreshold This object specifies the number of flush indications to go before
timer method triggers. (i.e.) the number of flush indications
to trigger the FlushInterval Timer.
… | column | Integer32 | .1.3.6.1.4.1.2076.119.1.3.1.22 |
| fsMIRstTotalFlushCount The number of times flush is being triggered from
the STP stack in case of RSTP mode. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.119.1.3.1.23 |
| fsMIRstFwdDelayAltPortRoleTrOptimization When ROLE_TRANSLATION takes place from ALTERNATE to DESIGNATED,
the value with which fdWhile timer started is controlled by this
object configuration.
1. As per the standard IEEE… | column | EnabledStatus | .1.3.6.1.4.1.2076.119.1.3.1.24 |
| fsMIRstBpduGuard This object configures BPDU guard globally in RSTP
and this global BPDU is applicable if and only if no Port specific
BpduGuard is configured.
Enable - enables BPDU Guard featu… | column | Enumeration | .1.3.6.1.4.1.2076.119.1.3.1.25 |
| fsMIRstStpPerfStatus This object enables or disables the collection of performance data
for the RSTP protocol. 'enable' (1) indicates that the collection of
rstp performance data is enabled in the dev… | column | Enumeration | .1.3.6.1.4.1.2076.119.1.3.1.26 |
| fsMIRstPathCostType The version of the Spanning Tree default Path Costs that
are to be used by this Bridge. A value of 8021d1998(1)
uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998.
A v… | column | Enumeration | .1.3.6.1.4.1.2076.119.1.3.1.27 |
| fsMIRstModuleStatus This object specifies the administrative module status requested by
management for the RSTP Module. This enables or disables RSTP in the
system. A value of 'enabled'(1) indicates… | column | EnabledStatus | .1.3.6.1.4.1.2076.119.1.3.1.3 |
| fsMIRstTraceOption This object is used to enable Trace Statements in the RSTP
Module.
A FOUR BYTE integer is used for enabling the level of tracing.
Each BIT in the four byte integer… | column | Integer32 | .1.3.6.1.4.1.2076.119.1.3.1.4 |
| fsMIRstDebugOption This object is used to enable Debug Statements in the RSTP
Module.
A FOUR BYTE integer is used for enabling the level of debugging.
Each BIT in the four byte integ… | column | Integer32 | .1.3.6.1.4.1.2076.119.1.3.1.5 |
| fsMIRstRstpUpCount This object specifies the number of times RSTP Module has been enabled. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.119.1.3.1.6 |
| fsMIRstRstpDownCount This object specifies the number of times RSTP Module has been disabled. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.119.1.3.1.7 |
| fsMIRstBufferFailureCount This object specifies the number of times buffer overflows/failures have
occurred. A Trap is generated on the occurrence of this event. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.119.1.3.1.8 |
| fsMIRstMemAllocFailureCount This object specifies the number of times memory allocation failures
have occurred.A Trap is generated on the occurrence of this event. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.119.1.3.1.9 |