fsMIPvrstTrace
Aricent-MIPVRST-MIB ·
.1.3.6.1.4.1.2076.154.1.3.1.10
Object
column
r/w
Integer32
This object is used to enable Trace Statements for the Pvrst
Module in this context.
A FOUR BYTE integer is used for enabling the level of tracing.
Each BIT in the four byte integer, represents a particular
level of Trace.
The mapping between the bit positions & the level of trace is
as follows:
0 - Init and Shutdown Traces
1 - Management Traces
2 - Data Path Traces
3 - Control Plane Traces
4 - Packet Dump Traces
5 - Traces related to All Resources except Buffers
6 - All Failure Traces
7 - Buffer Traces
The remaining bits are unused. Combination of trace levels are
also allowed.
For example if the bits 0 and 1 are set, then the Trace
statements related to Init-Shutdown and management
will be printed.
The user has to enter the corresponding INTEGER VALUE for the
bits set. For example if bits 0 and 1 are to be set then user has
to give the value for this object as 3.
Setting the Trace Option to any value will cause the Debug Option
to be set to 0 (i.e.) the Trace Option and Debug Option are mutually
exclusive.
Context
- MIB
- Aricent-MIPVRST-MIB
- OID
.1.3.6.1.4.1.2076.154.1.3.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIFuturePvrstEntry
- Table
- fsMIFuturePvrstTable
- Siblings
- 18
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIFuturePvrstContextId This object specifies the Virtual Context. | column | Integer32 | .1.3.6.1.4.1.2076.154.1.3.1.1 |
| fsMIPvrstDebug This object is used to enable Debug Statements in the Pvrst
Module.
A FOUR BYTE integer is used for enabling the level of debugging.
Each BIT in the four byte inte… | column | Integer32 | .1.3.6.1.4.1.2076.154.1.3.1.11 |
| fsMIPvrstBufferOverFlowCount This object specifies the number of times Buffer
overflows/failures have occurred.
A Trap is generated on the occurrence of this event. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.154.1.3.1.12 |
| fsMIPvrstMemAllocFailureCount This object specifies the number of times memory allocation
failures have occurred.
A Trap is generated on the occurrence of this event. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.154.1.3.1.13 |
| fsMIPvrstContextName This object is used to identity the context-name. | column | OctetString | .1.3.6.1.4.1.2076.154.1.3.1.14 |
| fsMIPvrstCalcPortPathCostOnSpeedChg This object is used to determine whether dynamic pathcost
calculation is done for a port for which Port Speed is changing
dynamically. This is mainly intended for Link Aggregated … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.3.1.15 |
| fsMIPvrstGlobalBpduGuard This object is used to configure BPDU guard globally in PVRST
and this global BPDU is applicable if and only if no Port specific
BpduGuard is configured.
Enable - enables BPDU G… | column | Enumeration | .1.3.6.1.4.1.2076.154.1.3.1.16 |
| fsMIPvrstForceProtocolVersion This object specifies the version of Spanning Tree Protocol
the bridge is currently running. The value 'stpCompatible(0)'
indicates the Spanning Tree Protocol running complies to… | column | Enumeration | .1.3.6.1.4.1.2076.154.1.3.1.17 |
| fsMIPvrstFlushInterval This object specifies the time value, measured in units of hundredths
of a second, controls the number of flush indications
invoked from STP module per instance basis.
… | column | centi-seconds Integer32 | .1.3.6.1.4.1.2076.154.1.3.1.18 |
| fsMIPvrstPathCostType The version of the Spanning Tree default Path Costs that
are to be used by this Bridge. A value of 8021d1998(1)
uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998.
A v… | column | Enumeration | .1.3.6.1.4.1.2076.154.1.3.1.19 |
| fsMIPvrstSystemControl This object specifies the administrative shutdown status
requested by management for the Pvrst
feature. The value start (1) indicates that Pvrst should be active in
the device… | column | Enumeration | .1.3.6.1.4.1.2076.154.1.3.1.2 |
| fsMIPvrstModuleStatus This object specifies the administrative status requested by
management for the Pvrst
feature. The value enabled(1) indicates that Pvrst should be enabled
in the device on al… | column | EnabledStatus | .1.3.6.1.4.1.2076.154.1.3.1.3 |
| fsMIPvrstNoOfActiveInstances This object specifies the number of instances active
currently | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.154.1.3.1.4 |
| fsMIPvrstBrgAddress This object specifies the MAC address used by this bridge when
it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address o… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2076.154.1.3.1.5 |
| fsMIPvrstUpCount This object specifies the number of times Pvrst Module has been
enabled. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.154.1.3.1.6 |
| fsMIPvrstDownCount This object specifies the number of times PVRST Module has been
disabled. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.154.1.3.1.7 |
| fsMIPvrstPathCostDefaultType obsolete *************This object is obsolete******************
The version of the Spanning Tree default Path Costs that
are to be used by this Bridge. A value of 8021d1998(1)
uses the 16… | column | Enumeration | .1.3.6.1.4.1.2076.154.1.3.1.8 |
| fsMIPvrstDynamicPathCostCalculation This object is used to determine whether dynamic pathcost
calculation is allowed or not. The value is determined by
management. If set to true, pathcost is calculated dynamically… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.3.1.9 |