fsMIPvrstPort
Aricent-MIPVRST-MIB ·
.1.3.6.1.4.1.2076.154.1.4.1.1
Object
column
Integer32
This object specifies a unique value, greater than zero, indicating the Port number.
Context
- MIB
- Aricent-MIPVRST-MIB
- OID
.1.3.6.1.4.1.2076.154.1.4.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- fsMIFuturePvrstPortEntry
- Table
- fsMIFuturePvrstPortTable
- Siblings
- 29
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIPvrstPortOperPointToPoint This object specifies the operational point-to-point status of
the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connectio… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.4.1.10 |
| fsMIPvrstPortInvalidBpdusRcvd Number of Invalid Pvrst BPDUs Received on this port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.154.1.4.1.11 |
| fsMIPvrstPortInvalidConfigBpduRxCount Number of Invalid Configuration BPDUs Received on this port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.154.1.4.1.12 |
| fsMIPvrstPortInvalidTcnBpduRxCount This object specifies the number of Invalid TCN BPDUs Received
on this port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.154.1.4.1.13 |
| fsMIPvrstPortRowStatus This object is used to create or delete interfaces at PVRST module
level. Ports can be created at PVRST module level only for ports
that
have been created in Interface manager an… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2076.154.1.4.1.14 |
| fsMIPvrstRootInconsistentState This object specifies a Boolean value set when the designated
port receives a superior BPDU trying to transition itself
to the Root Port.
A value of TRUE, indicates that the stat… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.4.1.15 |
| fsMIPvrstPortLoopGuard This object specifies a Boolean value set by management. If TRUE, then it will not age out
the information even if the peer does not send information. If the port
continues to rec… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.4.1.16 |
| fsMIPvrstPortLoopInconsistentState This object specifies a Boolean value set when the non-designated port on which loop-guard is enabled, tries to transition
to Designated/Forwarding due to the expiry of Receive in… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.4.1.17 |
| fsMIPvrstPortEnableBPDURx This object specifies a Boolean value set by the management. The BPDUs received
on the port are ignored when this object is set to False. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.4.1.18 |
| fsMIPvrstPortEnableBPDUTx This object specifies a Boolean value set by management. If
FALSE, no BPDUs are transmitted
by this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.4.1.19 |
| fsMIPvrstPortAdminEdgeStatus This object specifies the administrative value of the Edge Port
parameter. A
value of TRUE(1) indicates that this port should be
assumed as an edge-port and a value of FALSE(2) … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.4.1.2 |
| fsMIPvrstBpduFilter This object is used to configure BPDU filter in PVSTP mode.
Enable - Enables BPDU Filter feature on the port.
When Bpdu filter is enabled on a port, packet Tx and Rx are … | column | Enumeration | .1.3.6.1.4.1.2076.154.1.4.1.20 |
| fsMIPvrstPortAutoEdge This object when set to TRUE(1) indicates that detection of a
port
as Edge Port happens automatically and when set to FALSE(2) it
indicates that this feature is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.4.1.21 |
| fsMIPvrstPortBpduInconsistentState This object is a boolean value set which indicates the port
state changes to disabled / discarding
due to the BPDU guard feature enabled on the port and the port
receives the pa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.4.1.22 |
| fsMIPvrstPortTypeInconsistentState This object specifies the port state changes to
disabled / discarding
due to the PVRST tagged packet reception on an access port.
When set to TRUE,the state of this port is move… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.4.1.23 |
| fsMIPvrstPortPVIDInconsistentState This object specifies the port state changes to
disabled / discarding
due to reception of tagged PVRST BPDU on its native VLAN(native VLAN PVRST packet
is always untagged). When … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.4.1.24 |
| fsMIPvrstPortBpduGuardAction This object specifies the action to be taken when BPDU is received
on a BPDU guard enabled port.
When action is set as admin down error recovery time will be set as… | column | Enumeration | .1.3.6.1.4.1.2076.154.1.4.1.25 |
| fsMIPvrstPortRcvInfoWhileExpCount This object specifies the number of times the info was received while timer is
expired on this port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.154.1.4.1.26 |
| fsMIPvrstPortRcvInfoWhileExpTimeStamp This object specifies the time stamp(in hundredths of a second) at which the info
was received while timer is expired on this port last time. | column | centi-seconds SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.154.1.4.1.27 |
| fsMIPvrstPortImpStateOccurCount This object specifies the number of times the impossible state has occurred on this port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.154.1.4.1.28 |
| fsMIPvrstPortImpStateOccurTimeStamp This object specifies the time stamp(in hundredths of a second) at which the impossible
state has occurred on this port last time. | column | centi-seconds SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.154.1.4.1.29 |
| fsMIPvrstPortOperEdgePortStatus This object specifies the operational value of the Edge Port
parameter. The
object is initialized to the value of
fsMIPvrstPortAdminEdgeStatus and is set FALSE on reception
of … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.4.1.3 |
| fsMIPvrstPortErrorRecovery This object specifies the amount of time to bring the interface out of the
error-disabled (err-disabled) state.
The range is from 30 to 65535 seconds. | column | centi-seconds Integer32 | .1.3.6.1.4.1.2076.154.1.4.1.30 |
| fsMIPvrstBridgeDetectionSemState This object specifies Current state of the bridge
detection state machine
of this port for all Spanning Tree context | column | Enumeration | .1.3.6.1.4.1.2076.154.1.4.1.4 |
| fsMIPvrstPortEnabledStatus This object specifies the administrative value for the port
to configure PVRST enable/disable on this Port
By default PVRST is enabled on each port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.4.1.5 |
| fsMIPvrstRootGuard This object specifies the administrative value for the root
guard
is configurable on this Port. By default it is
False(2) & can be configured True(1). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.4.1.6 |
| fsMIPvrstBpduGuard This object is used to configure the BPDU guard feature on
this port and has higher priority over Global BPDU Guard.
Enable - prevents temporary loops and applicable to ports and… | column | Enumeration | .1.3.6.1.4.1.2076.154.1.4.1.7 |
| fsMIPvrstEncapType This object specifies the administrative value for the
encapsulation type on the Port.
On Access Port, the encapsulation
type will be DOT1q & is unchangeable.
Only on Trunk Por… | column | Enumeration | .1.3.6.1.4.1.2076.154.1.4.1.8 |
| fsMIPvrstPortAdminPointToPoint This object specifies the administrative point-to-point status of
the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated… | column | Enumeration | .1.3.6.1.4.1.2076.154.1.4.1.9 |