fsMIPvrstGlobalBpduGuard
Aricent-MIPVRST-MIB ·
.1.3.6.1.4.1.2076.154.1.3.1.16
Object
column
r/w
Enumeration
This object is used to configure BPDU guard globally in PVRST and this global BPDU is applicable if and only if no Port specific BpduGuard is configured. Enable - enables BPDU Guard feature on edge ports globally and moves the port to disabled discarding state when BPDU is received on the edge ports. Disable - disables BPDU Guard feature on edge ports globally.
Context
- MIB
- Aricent-MIPVRST-MIB
- OID
.1.3.6.1.4.1.2076.154.1.3.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIFuturePvrstEntry
- Table
- fsMIFuturePvrstTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIFuturePvrstContextId This object specifies the Virtual Context. | column | Integer32 | .1.3.6.1.4.1.2076.154.1.3.1.1 |
| fsMIPvrstTrace This object is used to enable Trace Statements for the Pvrst
Module in this context.
A FOUR BYTE integer is used for enabling the level of tracing.
Each BIT in the… | column | Integer32 | .1.3.6.1.4.1.2076.154.1.3.1.10 |
| fsMIPvrstDebug This object is used to enable Debug Statements in the Pvrst
Module.
A FOUR BYTE integer is used for enabling the level of debugging.
Each BIT in the four byte inte… | column | Integer32 | .1.3.6.1.4.1.2076.154.1.3.1.11 |
| fsMIPvrstBufferOverFlowCount This object specifies the number of times Buffer
overflows/failures have occurred.
A Trap is generated on the occurrence of this event. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.154.1.3.1.12 |
| fsMIPvrstMemAllocFailureCount This object specifies the number of times memory allocation
failures have occurred.
A Trap is generated on the occurrence of this event. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.154.1.3.1.13 |
| fsMIPvrstContextName This object is used to identity the context-name. | column | OctetString | .1.3.6.1.4.1.2076.154.1.3.1.14 |
| fsMIPvrstCalcPortPathCostOnSpeedChg This object is used to determine whether dynamic pathcost
calculation is done for a port for which Port Speed is changing
dynamically. This is mainly intended for Link Aggregated … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.3.1.15 |
| fsMIPvrstForceProtocolVersion This object specifies the version of Spanning Tree Protocol
the bridge is currently running. The value 'stpCompatible(0)'
indicates the Spanning Tree Protocol running complies to… | column | Enumeration | .1.3.6.1.4.1.2076.154.1.3.1.17 |
| fsMIPvrstFlushInterval This object specifies the time value, measured in units of hundredths
of a second, controls the number of flush indications
invoked from STP module per instance basis.
… | column | centi-seconds Integer32 | .1.3.6.1.4.1.2076.154.1.3.1.18 |
| fsMIPvrstPathCostType The version of the Spanning Tree default Path Costs that
are to be used by this Bridge. A value of 8021d1998(1)
uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998.
A v… | column | Enumeration | .1.3.6.1.4.1.2076.154.1.3.1.19 |
| fsMIPvrstSystemControl This object specifies the administrative shutdown status
requested by management for the Pvrst
feature. The value start (1) indicates that Pvrst should be active in
the device… | column | Enumeration | .1.3.6.1.4.1.2076.154.1.3.1.2 |
| fsMIPvrstModuleStatus This object specifies the administrative status requested by
management for the Pvrst
feature. The value enabled(1) indicates that Pvrst should be enabled
in the device on al… | column | EnabledStatus | .1.3.6.1.4.1.2076.154.1.3.1.3 |
| fsMIPvrstNoOfActiveInstances This object specifies the number of instances active
currently | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.154.1.3.1.4 |
| fsMIPvrstBrgAddress This object specifies the MAC address used by this bridge when
it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address o… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2076.154.1.3.1.5 |
| fsMIPvrstUpCount This object specifies the number of times Pvrst Module has been
enabled. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.154.1.3.1.6 |
| fsMIPvrstDownCount This object specifies the number of times PVRST Module has been
disabled. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.154.1.3.1.7 |
| fsMIPvrstPathCostDefaultType obsolete *************This object is obsolete******************
The version of the Spanning Tree default Path Costs that
are to be used by this Bridge. A value of 8021d1998(1)
uses the 16… | column | Enumeration | .1.3.6.1.4.1.2076.154.1.3.1.8 |
| fsMIPvrstDynamicPathCostCalculation This object is used to determine whether dynamic pathcost
calculation is allowed or not. The value is determined by
management. If set to true, pathcost is calculated dynamically… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.154.1.3.1.9 |