aviatModemModulationMax
AVIAT-MODEM-MIB ·
.1.3.6.1.4.1.2509.9.3.2.1.1.4
Object
This specifies the maximum modulation to use for ACM.
See the aviatModemModulationBase description for
details.
Setting Max without setting Acm mode to the
appropriate ACM mode will cause this command to fail
(i.e. 1024qam requires acm1024).
Context
- MIB
- AVIAT-MODEM-MIB
- OID
.1.3.6.1.4.1.2509.9.3.2.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aviatModemEntry
- Table
- aviatModemTable
- Siblings
- 13
Syntax
AVIAT-TEXTCONVENTION-MIBAviatModulationType
- Source
- AVIAT-TEXTCONVENTION-MIBAviatModulationType
- Base type
Enumeration
Values & Constraints
Type Values
1 | modulationNone |
2 | modulationQpsk |
3 | modulation16qam |
4 | modulation32qam |
5 | modulation64qam |
6 | modulation128qam |
7 | modulation256qam |
8 | modulation512qam |
9 | modulation1024qam |
10 | modulation256qamHG |
11 | modulation512qamHG |
12 | modulation1024qamHG |
13 | modulation2048qam |
14 | modulation4096qam |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aviatModemBandwidth The modem channel bandwidth currently in use, in
kilohertz. | column | kHz SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2509.9.3.2.1.1.1 |
| aviatModemMLHCEnabled Enable multilayer header compression for this radio interface. | column | Enumeration | .1.3.6.1.4.1.2509.9.3.2.1.1.10 |
| aviatModemCurCapacityTx Current capacity in the transmit direction. | column | AviatModemCapacityType | .1.3.6.1.4.1.2509.9.3.2.1.1.11 |
| aviatModemCurCapacityRx Current capacity in the receive direction. | column | AviatModemCapacityType | .1.3.6.1.4.1.2509.9.3.2.1.1.12 |
| aviatModemCurModulationTx Current modulation used to transmit. | column | AVIAT-TEXTCONVENTION-MIBAviatModulationType | .1.3.6.1.4.1.2509.9.3.2.1.1.13 |
| aviatModemCurModulationRx Current modulation used to receive. | column | AVIAT-TEXTCONVENTION-MIBAviatModulationType | .1.3.6.1.4.1.2509.9.3.2.1.1.14 |
| aviatModemModulationType This allocates an ACM license for this radio link
allowing modulation up to and including this
modulation. | column | Enumeration | .1.3.6.1.4.1.2509.9.3.2.1.1.2 |
| aviatModemModulationBase This specifies the base modulation to use for modem.
Together with aviatModemModulationMax this is used to
define the range of modulations that can be active for
ACM. The modem wi… | column | AVIAT-TEXTCONVENTION-MIBAviatModulationType | .1.3.6.1.4.1.2509.9.3.2.1.1.3 |
| aviatModemLicensedModulationMask When configured for adaptive modulation, this
specifies the licensed RF mask. Tx power output will
be controlled to maintain compliance with the
operator's licensed RF mask accord… | column | AVIAT-TEXTCONVENTION-MIBAviatModulationType | .1.3.6.1.4.1.2509.9.3.2.1.1.5 |
| aviatModemRegulatoryStandard This specifies the regulatory standard to use. | column | Enumeration | .1.3.6.1.4.1.2509.9.3.2.1.1.6 |
| aviatModemProfileVersion This sets the profile version to use. If a new profile
comes out with the same characteristics to a previous
one but not over air compatible, the new one will have
a different ver… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2509.9.3.2.1.1.7 |
| aviatModemCapacity This specifies the capacity to license for this
interface. Set to 0 to unlicense. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2509.9.3.2.1.1.8 |
| aviatModemL1laLiteEnabled Enabled L1laLite for this interface and it's partner | column | Enumeration | .1.3.6.1.4.1.2509.9.3.2.1.1.9 |