globalIAPRxThreshold
AVAYA-WLAN-MIB ·
.1.3.6.1.4.1.45.8.1.1.12.1.2.4
Object
scalar
r/w
Integer32
Rx (deferred) threshold setting
Context
- MIB
- AVAYA-WLAN-MIB
- OID
.1.3.6.1.4.1.45.8.1.1.12.1.2.4- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- global
- Siblings
- 51
Syntax
Integer32
Values & Constraints
Object Constraints
range: -100-0
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| globalIAPEnable Bring all IAPs up or down | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.1 |
| globalIAPInactiveTime Time, in seconds, without any activity before removing the client from the association table | scalar | Integer32 | .1.3.6.1.4.1.45.8.1.1.12.1.2.10 |
| globalIAPReauthPeriod Time (sec) between 802.1x re_authentication attempts | scalar | Integer32 | .1.3.6.1.4.1.45.8.1.1.12.1.2.11 |
| globalIAPSta2Sta Block or forward intra-Array STA to STA traffic | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.12 |
| globalMgmt Enable management on the WLAN interfaces | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.13 |
| leds | node | - | .1.3.6.1.4.1.45.8.1.1.12.1.2.14 |
| autoChannel | node | - | .1.3.6.1.4.1.45.8.1.1.12.1.2.15 |
| rogueDetect | node | - | .1.3.6.1.4.1.45.8.1.1.12.1.2.16 |
| fastRoaming | node | - | .1.3.6.1.4.1.45.8.1.1.12.1.2.17 |
| globalLoadBalancing Enable/disable load balancing across IAPs | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.18 |
| globalCountryCode Country code | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.19 |
| globalIAPCellSize Set up RF cell size base on Tx pwr and Rx Threshold | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.2 |
| globalSharpCell Enable/disable sharp cell TX power shaping | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.20 |
| globalIAPMaxPhones Limit the number of phones that can be associated per IAP. Note this is not used and essentially deprecated. | scalar | Integer32 | .1.3.6.1.4.1.45.8.1.1.12.1.2.21 |
| globalNumStations Number of stations associated with array | scalar | Integer32 | .1.3.6.1.4.1.45.8.1.1.12.1.2.22 |
| globalBroadcastRates Select standard or optimized broadcast rates | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.23 |
| autoCell | node | - | .1.3.6.1.4.1.45.8.1.1.12.1.2.24 |
| globalPublicSafety Enable/disable public safety band | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.25 |
| globalDot11hSupport Enable/disable support for 802.11h beacons | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.26 |
| globalLoopbackTest IAP radio assurance mode | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.27 |
| globalArpFilter Enable/disable ARP filtering | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.28 |
| globalIAPChannelReset Reset all channels back to factory defaults | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.29 |
| globalIAPTxPwr Maximum Tx power output from any radio | scalar | Integer32 | .1.3.6.1.4.1.45.8.1.1.12.1.2.3 |
| globalWfaMode Enable/disable WiFi Alliance mode | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.30 |
| globalMaxStations Maximum number of associated stations per array | scalar | Integer32 | .1.3.6.1.4.1.45.8.1.1.12.1.2.31 |
| globalMulticastMode Select multicast mode | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.32 |
| ids | node | - | .1.3.6.1.4.1.45.8.1.1.12.1.2.33 |
| globalAutoBandEnable Automatically assign bands (2.4GHz or 5GHz) to all IAPs | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.34 |
| globalWmmPowerSave Enable/disable WMM power save mode | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.35 |
| globalDscpMappingMode Enable/disable DSCP to QoS mapping | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.36 |
| globalDscpMappingTable DSCP to QoS mapping | table | - | .1.3.6.1.4.1.45.8.1.1.12.1.2.37 |
| globalMulticastExcludeTable Multicast conversion exclude list | table | - | .1.3.6.1.4.1.45.8.1.1.12.1.2.38 |
| globalMulticastExcludeTableReset Reset multicast conversion exclude list | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.39 |
| rfMonitor | node | - | .1.3.6.1.4.1.45.8.1.1.12.1.2.40 |
| globalExtractStaInfoTable Station information to be extracted table | table | - | .1.3.6.1.4.1.45.8.1.1.12.1.2.41 |
| globalStaAuthTimeout Time to complete 802.1x authentication (seconds) | scalar | Integer32 | .1.3.6.1.4.1.45.8.1.1.12.1.2.42 |
| globalIPv6Filter Enable/disable IPv6 packet filtering | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.43 |
| globalMulticastForwardingTable Multicast conversion forwarding list | table | - | .1.3.6.1.4.1.45.8.1.1.12.1.2.44 |
| globalMulticastForwardingTableReset Reset multicast conversion forwarding list | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.45 |
| globalMulticastVlanForwardingTable Multicast conversion vlan forwarding list | table | - | .1.3.6.1.4.1.45.8.1.1.12.1.2.46 |
| globalMulticastVlanForwardingTableReset Reset multicast conversion vlan forwarding list | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.47 |
| globalMulticastDnsFilteringTable Multicast DNS filtering list | table | - | .1.3.6.1.4.1.45.8.1.1.12.1.2.48 |
| globalMulticastDnsFilteringTableReset Reset multicast DNS filtering list | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.49 |
| globalIAPBeaconRate Time between beacons in kilo_microseconds | scalar | Integer32 | .1.3.6.1.4.1.45.8.1.1.12.1.2.5 |
| globalDot11kSupport Enable/disable support for 802.11k beacons | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.50 |
| globalDot11wProtectedManagement Enable/disable support for 802.11w Protected Management | scalar | Enumeration | .1.3.6.1.4.1.45.8.1.1.12.1.2.51 |
| globalExtractIpAddrDhcpPeriod Station IP address extraction via DHCP period | scalar | Integer32 | .1.3.6.1.4.1.45.8.1.1.12.1.2.52 |
| globalIAPBeaconDTIM Number of beacons between DTIM being transmitted | scalar | Integer32 | .1.3.6.1.4.1.45.8.1.1.12.1.2.6 |
| globalIAPLongRetry Long retry | scalar | Integer32 | .1.3.6.1.4.1.45.8.1.1.12.1.2.7 |
| globalIAPShortRetry Short retry | scalar | Integer32 | .1.3.6.1.4.1.45.8.1.1.12.1.2.8 |
| globalIAPMaxStations Limit the number of STA that can be associated per IAP | scalar | Integer32 | .1.3.6.1.4.1.45.8.1.1.12.1.2.9 |