avGenOpEnableReset
AVAYA-LOAD-MIB ·
.1.3.6.1.4.1.6889.2.6.5.1.2.1.17
Object
column
r/w
Enumeration
Whether to do a reset after the operation completed successfully.
Context
- MIB
- AVAYA-LOAD-MIB
- OID
.1.3.6.1.4.1.6889.2.6.5.1.2.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- avGenOpEntry
- Table
- avGenOpTable
- Siblings
- 24
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| avGenOpModuleId Index which identifies the module inside the chassis for which this
entry contains information. Equals the number of the slot by which
the group is accessed or the stackable index… | column | Integer32 | .1.3.6.1.4.1.6889.2.6.5.1.2.1.1 |
| avGenOpFileName The location (including the FULL path) of the file in the server.
NOTE: In the case of localPeerTransport this value should be NULL.
In case of genOpProtocolType==u… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6889.2.6.5.1.2.1.10 |
| avGenOpRunningStateDisplay The state of the operation for Display on the terminal during
operation process. | column | OctetString | .1.3.6.1.4.1.6889.2.6.5.1.2.1.11 |
| avGenOpLastFailureIndex While a download is in progress this will
always be 'no-error'. After a download is complete
this indicates the success or failure of the download.
If it is anything other than… | column | Enumeration | .1.3.6.1.4.1.6889.2.6.5.1.2.1.12 |
| avGenOpLastFailureDisplay Contains the last error, Null if there is no error. | column | OctetString | .1.3.6.1.4.1.6889.2.6.5.1.2.1.13 |
| avGenOpLastWarningDisplay Last warning which didn't stop the operation (not fatal error). | column | OctetString | .1.3.6.1.4.1.6889.2.6.5.1.2.1.14 |
| avGenOpErrorLogIndex The Index in the 'avGenAppFileTable' under which an error log has
been created. In the case of file that produce errors this file
should contain a log of errors that occurred. (T… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.6.5.1.2.1.15 |
| avGenOpResetSupported Indicates if a reset (after operation completion) is supported by
this Module. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.5.1.2.1.16 |
| avGenOpNextBootImageIndex The row in the 'avGenAppFileTable' of the default Application that
the device will boot from when a standard reboot is performed. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.6.5.1.2.1.18 |
| avGenOpLastBootImageIndex The Index in the 'avGenAppFileTable' of the default Application
that the device was last booted from. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.6.5.1.2.1.19 |
| avGenOpIndex Index to identify the operation supported by this row entry.
Each operation type that is supported by this module should be
represented by a unique row in this MIB Table. A wal… | column | Enumeration | .1.3.6.1.4.1.6889.2.6.5.1.2.1.2 |
| avGenOpFileSystemType Indicates what type of file system is supported by this module.
A value of 'static' indicates that rows in the 'avGenAppFileTable'
are not removable nor can new entries be created… | column | Enumeration | .1.3.6.1.4.1.6889.2.6.5.1.2.1.20 |
| avGenOpReportSpecificFlags Contain modifiers to the Report operation.
fullReport - Full configuration report
partialReport - A report without the information stored
in … | column | Enumeration | .1.3.6.1.4.1.6889.2.6.5.1.2.1.21 |
| avGenOpOctetsReceived While a download is in progress this indicates the number
of bytes transferred so far. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.6.5.1.2.1.22 |
| avGenOpDownloadProxy The avGenOpDownloadProxy is the location of a CLAN board that will serve as
the proxy for the firmware download of a TDM-based board, since these boards
are unable to perform th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.6.5.1.2.1.23 |
| avGenOpServerInetAddressType The address type of avGenOpServerInetAddress. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6889.2.6.5.1.2.1.24 |
| avGenOpServerInetAddress The Inet Address of the remote file server.
1. The address type of this object is specified in
avGenOpServerInetAddress.
2. Management applications can use avGenOpServerIP or
… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.6889.2.6.5.1.2.1.25 |
| avGenOpRunningState Identifies the operation to perform and the state of that operation.
This field acts as both the trigger to initiate the operation (via
the beginOperation) and the status field of… | column | Enumeration | .1.3.6.1.4.1.6889.2.6.5.1.2.1.3 |
| avGenOpSourceIndex The index value (taken from the avGenAppFileTable) of the source of
the operation. NOTE: A value of zero (0) here indicates that the
Server (specified below) is the source. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.6.5.1.2.1.4 |
| avGenOpDestIndex The index value (taken from the avGenAppFileTable) of the destination
of the operation. NOTE: A value of zero (0) here indicates that
the Server (specified below) is the Destina… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.6.5.1.2.1.5 |
| avGenOpServerIP The IP Address of the server from/to which the file has to be
Download/Upload. NOTE: In the case of localPeerTransport this
value should be NULL.
Please note that … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.6.5.1.2.1.6 |
| avGenOpUserName Contains the username to be used if the protocol specified in
avGenOpProtocolType requires one. The default value will be the
empty string | column | OctetString | .1.3.6.1.4.1.6889.2.6.5.1.2.1.7 |
| avGenOpPassword Contains the password to be used if the protocol specified in
avGenOpProtocolType requires one. The default value will be the
empty string | column | OctetString | .1.3.6.1.4.1.6889.2.6.5.1.2.1.8 |
| avGenOpProtocolType Identifies the protocol between the management station and the
device for Download/Upload of the file. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.5.1.2.1.9 |