avipsIsakmpPeerSelfIdType
AVAYA-IPSEC-MIB ·
.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.6
Object
column
r/w
IsakmpIdentityType
This object is an enumeration identifying the type
of the Identity value which the local peer shall
use in the its identity payload during Phase-1
negotiation.
This object is N/A if avipsIsakmpPeerIdType is peerGroup.
Context
- MIB
- AVAYA-IPSEC-MIB
- OID
.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- avipsIsakmpPeerEntry
- Table
- avipsIsakmpPeerTable
- Siblings
- 13
Syntax
IsakmpIdentityType
- Source
- IsakmpIdentityType
- Base type
Enumeration
Values & Constraints
Type Values
1 | ipv4Address |
2 | fqdn |
3 | userFqdn |
256 | none |
257 | peerGroup |
270 | ifName |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| avipsIsakmpPeerIdType This object is an enumeration identifying the type of the
Identity value. Note that value can also be peerGroup,
in that case avipsIsakmpPeerId contains the peer-group's
name. Al… | column | Integer32 | .1.3.6.1.4.1.6889.2.6.1.1.2.1.1.1 |
| avipsIsakmpPeerKeepaliveRetryInterval The actual interval, in seconds, between R-U-THERE
retries sent by the local peer, when the previous
R-U-THERE message has not been answered.
This object is N/A if … | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.6.1.1.2.1.1.10 |
| avipsIsakmpPeerKeepaliveTrackId Bind the status of this peer to an object-tracker by specifying
the ID of the object-tracker (avstrTrackerId in
AVAYA-SAA-TRACK-MIB).
A value of 0 means that peer is not bound to… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.6.1.1.2.1.1.11 |
| avipsIsakmpPeerContChannel This object determines whether continuous channel IKE
mode is used for contacting the peer.
Continuous channel IKE means that local peer
tries to establish an IKE SA with the remo… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6889.2.6.1.1.2.1.1.12 |
| avipsIsakmpPeerRowStatus This object indicates the conceptual status of this row.
The value of this object has no effect on whether other
objects in this conceptual row can be modified.
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6889.2.6.1.1.2.1.1.13 |
| avipsIsakmpPeerGroupFailbacktoPrimaryInterval The amount of time in seconds that secondary peer shall be up (after
primary peer went down) before there will be failback to primary
peer (in case it is up again). The default v… | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.6.1.1.2.1.1.14 |
| avipsIsakmpPeerId This object contains an Identity filter to be used to match
against the identity payload in an IKE request.
This is also the second index component of this table. | column | IsakmpIdentityValue | .1.3.6.1.4.1.6889.2.6.1.1.2.1.1.2 |
| avipsIsakmpPeerDescription Free text describing this row. | column | OctetString | .1.3.6.1.4.1.6889.2.6.1.1.2.1.1.3 |
| avipsIsakmpPeerIsaPlcyId1 This object contains the ID of the ISAKMP policy to be used
in IKE Phase I negotiation with this peer.
A value of 0 indicates that this object is empty.
This object… | column | Integer32 | .1.3.6.1.4.1.6889.2.6.1.1.2.1.1.4 |
| avipsIsakmpPeerInitiateMode This object specifies how to initiate IKE when communicating
with this peer:
none(1) - Never initiate IKE with this peer (i.e. respond only)
main(2) - Initiate Main Mode (MM)
aggr… | column | Enumeration | .1.3.6.1.4.1.6889.2.6.1.1.2.1.1.5 |
| avipsIsakmpPeerSelfId If not empty, this object specifies the identity value
which the local peer will send in the identification payload
during IKE Phase-1 negotiation.
If this object is empty, the … | column | IsakmpIdentityValue | .1.3.6.1.4.1.6889.2.6.1.1.2.1.1.7 |
| avipsIsakmpPeerKeepaliveMetric The worry-metric to be used for deciding when to
send R-U-THERE message to the remote peer.
This object is N/A if avipsIsakmpPeerIdType is peerGroup. | column | IsakmpDpdKeepaliveMetric | .1.3.6.1.4.1.6889.2.6.1.1.2.1.1.8 |
| avipsIsakmpPeerKeepaliveInterval The minimal interval, in seconds, between two
consecutive R-U-THERE sent by the local peer, when
the previous R-U-THERE message has been answered.
The actual interval is based on… | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.6.1.1.2.1.1.9 |