avipsIsakmpPeerIdType

AVAYA-IPSEC-MIB · .1.3.6.1.4.1.6889.2.6.1.1.2.1.1.1

MIB view Table view

Object

column Integer32

This object is an enumeration identifying the type of the
Identity value. Note that value can also be peerGroup,
in that case avipsIsakmpPeerId contains the peer-group's 
name. Also note that certain columns in this row are N/A
for peer-group (refer to specific objects' descriptions
for details).
This is also the first index component of this table.

Context

MIB: AVAYA-IPSEC-MIB
OID: .1.3.6.1.4.1.6889.2.6.1.1.2.1.1.1
Type: column
Access: noaccess
Status: current
Parent: avipsIsakmpPeerEntry
Table: avipsIsakmpPeerTable
Siblings: 13

Syntax

Integer32

Values & Constraints

Object Constraints

range: 1-260

Related Objects

Sibling Objects

Object	Type	Syntax	OID
avipsIsakmpPeerKeepaliveRetryInterval The actual interval, in seconds, between R-U-THERE retries sent by the local peer, when the previous R-U-THERE message has not been answered. This object is N/A if …	column	seconds SNMPv2-SMIInteger32	`.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.10`
avipsIsakmpPeerKeepaliveTrackId Bind the status of this peer to an object-tracker by specifying the ID of the object-tracker (avstrTrackerId in AVAYA-SAA-TRACK-MIB). A value of 0 means that peer is not bound to…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.11`
avipsIsakmpPeerContChannel This object determines whether continuous channel IKE mode is used for contacting the peer. Continuous channel IKE means that local peer tries to establish an IKE SA with the remo…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.12`
avipsIsakmpPeerRowStatus This object indicates the conceptual status of this row. The value of this object has no effect on whether other objects in this conceptual row can be modified. …	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.13`
avipsIsakmpPeerGroupFailbacktoPrimaryInterval The amount of time in seconds that secondary peer shall be up (after primary peer went down) before there will be failback to primary peer (in case it is up again). The default v…	column	seconds SNMPv2-SMIInteger32	`.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.14`
avipsIsakmpPeerId This object contains an Identity filter to be used to match against the identity payload in an IKE request. This is also the second index component of this table.	column	IsakmpIdentityValue	`.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.2`
avipsIsakmpPeerDescription Free text describing this row.	column	OctetString	`.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.3`
avipsIsakmpPeerIsaPlcyId1 This object contains the ID of the ISAKMP policy to be used in IKE Phase I negotiation with this peer. A value of 0 indicates that this object is empty. This object…	column	Integer32	`.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.4`
avipsIsakmpPeerInitiateMode This object specifies how to initiate IKE when communicating with this peer: none(1) - Never initiate IKE with this peer (i.e. respond only) main(2) - Initiate Main Mode (MM) aggr…	column	Enumeration	`.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.5`
avipsIsakmpPeerSelfIdType This object is an enumeration identifying the type of the Identity value which the local peer shall use in the its identity payload during Phase-1 negotiation. T…	column	IsakmpIdentityType	`.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.6`
avipsIsakmpPeerSelfId If not empty, this object specifies the identity value which the local peer will send in the identification payload during IKE Phase-1 negotiation. If this object is empty, the …	column	IsakmpIdentityValue	`.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.7`
avipsIsakmpPeerKeepaliveMetric The worry-metric to be used for deciding when to send R-U-THERE message to the remote peer. This object is N/A if avipsIsakmpPeerIdType is peerGroup.	column	IsakmpDpdKeepaliveMetric	`.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.8`
avipsIsakmpPeerKeepaliveInterval The minimal interval, in seconds, between two consecutive R-U-THERE sent by the local peer, when the previous R-U-THERE message has been answered. The actual interval is based on…	column	seconds SNMPv2-SMIInteger32	`.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.9`