avipsIsakmpPeerGroupFailbacktoPrimaryInterval

AVAYA-IPSEC-MIB · .1.3.6.1.4.1.6889.2.6.1.1.2.1.1.14
MIB view Table view

Object

column r/w seconds SNMPv2-SMIInteger32 
The amount of time in seconds that secondary peer shall be up (after 
primary peer went down) before there will be failback to primary
peer (in case it is up again). The default value is 24 hours.
              
Relevant for peer-group only (values 1 and up). 
For peer return value of 0.

Context

MIB
AVAYA-IPSEC-MIB
OID
.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.14
Type
column
Access
readwrite
Status
current
Units
seconds
Parent
avipsIsakmpPeerEntry
Table
avipsIsakmpPeerTable
Siblings
13

Syntax

seconds SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
avipsIsakmpPeerIdType
This object is an enumeration identifying the type of the Identity value. Note that value can also be peerGroup, in that case avipsIsakmpPeerId contains the peer-group's name. Al…
columnInteger32.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.1
avipsIsakmpPeerKeepaliveRetryInterval
The actual interval, in seconds, between R-U-THERE retries sent by the local peer, when the previous R-U-THERE message has not been answered. This object is N/A if …
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.10
avipsIsakmpPeerKeepaliveTrackId
Bind the status of this peer to an object-tracker by specifying the ID of the object-tracker (avstrTrackerId in AVAYA-SAA-TRACK-MIB). A value of 0 means that peer is not bound to…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.11
avipsIsakmpPeerContChannel
This object determines whether continuous channel IKE mode is used for contacting the peer. Continuous channel IKE means that local peer tries to establish an IKE SA with the remo…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.12
avipsIsakmpPeerRowStatus
This object indicates the conceptual status of this row. The value of this object has no effect on whether other objects in this conceptual row can be modified. …
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.13
avipsIsakmpPeerId
This object contains an Identity filter to be used to match against the identity payload in an IKE request. This is also the second index component of this table.
columnIsakmpIdentityValue.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.2
avipsIsakmpPeerDescription
Free text describing this row.
columnOctetString.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.3
avipsIsakmpPeerIsaPlcyId1
This object contains the ID of the ISAKMP policy to be used in IKE Phase I negotiation with this peer. A value of 0 indicates that this object is empty. This object…
columnInteger32.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.4
avipsIsakmpPeerInitiateMode
This object specifies how to initiate IKE when communicating with this peer: none(1) - Never initiate IKE with this peer (i.e. respond only) main(2) - Initiate Main Mode (MM) aggr…
columnEnumeration.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.5
avipsIsakmpPeerSelfIdType
This object is an enumeration identifying the type of the Identity value which the local peer shall use in the its identity payload during Phase-1 negotiation. T…
columnIsakmpIdentityType.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.6
avipsIsakmpPeerSelfId
If not empty, this object specifies the identity value which the local peer will send in the identification payload during IKE Phase-1 negotiation. If this object is empty, the …
columnIsakmpIdentityValue.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.7
avipsIsakmpPeerKeepaliveMetric
The worry-metric to be used for deciding when to send R-U-THERE message to the remote peer. This object is N/A if avipsIsakmpPeerIdType is peerGroup.
columnIsakmpDpdKeepaliveMetric.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.8
avipsIsakmpPeerKeepaliveInterval
The minimal interval, in seconds, between two consecutive R-U-THERE sent by the local peer, when the previous R-U-THERE message has been answered. The actual interval is based on…
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.6.1.1.2.1.1.9