atswitchPortEntry

ATSWTCH2-MIB · .1.3.6.1.4.1.207.8.10.3.1.1

MIB view Table view

Object

row mandatory

An entry in the port config table.

Context

MIB: ATSWTCH2-MIB
OID: .1.3.6.1.4.1.207.8.10.3.1.1
Type: row
Status: mandatory
Parent: atswitchPortTable
Table: atswitchPortTable
Children: 15

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
atswitchPortNumber mandatory This object identifies the port of the switch.	column	Integer32	`.1.3.6.1.4.1.207.8.10.3.1.1.1`
atswitchPortBridgeid mandatory The Bridge to which this port belongs to .	column	Integer32	`.1.3.6.1.4.1.207.8.10.3.1.1.10`
atswitchPortSTPCost mandatory The Cost of the Spanning Tree Protocol.This object is valid only when STP is enabled.	column	Integer32	`.1.3.6.1.4.1.207.8.10.3.1.1.11`
atswitchPortSTPPriority mandatory The Priority of the spanning Tree Protocol. This object is valid when STP is enabled.	column	Integer32	`.1.3.6.1.4.1.207.8.10.3.1.1.12`
atswitchPortSwitchingType mandatory This per-port attribute describes whether the port identified by atswitchPortNumber uses store-and-forward bridging for local switched Ethernet packets or cut-through. The Hardwa…	column	Enumeration	`.1.3.6.1.4.1.207.8.10.3.1.1.13`
atswitchPortFlowControlEnable obsolete This Per_port attribute is only for ATS21 product.(81XX). This per-port attribute describes whether the port identified has flow Control Enabled or not. Flow Control on Full Dupl…	column	Enumeration	`.1.3.6.1.4.1.207.8.10.3.1.1.14`
atswitchPortSecurityNumberOfAddresses mandatory This object configures the Max number of addresses at an instance to be learnt by the device. If the learnt addresses number is above this number, then the atswitchSecurityAction …	column	Integer32	`.1.3.6.1.4.1.207.8.10.3.1.1.15`
atswitchPortName mandatory This attribute associates a user defined string name with the port.	column	OctetString	`.1.3.6.1.4.1.207.8.10.3.1.1.2`
atswitchPortAutosenseOrHalfDuplex mandatory This attribute allows an administrative request to configure whether this port can Autosense or Force the Half Duplex	column	Enumeration	`.1.3.6.1.4.1.207.8.10.3.1.1.3`
atswitchPortLinkState mandatory This attribute allows an administrative request to read the status of link state on this port.	column	Enumeration	`.1.3.6.1.4.1.207.8.10.3.1.1.4`
atswitchPortDuplexStatus mandatory This attribute allows an administrative request to read the status of Duplex on this port.	column	Enumeration	`.1.3.6.1.4.1.207.8.10.3.1.1.5`
atswitchPortSpeed mandatory This attribute allows an administrative request to read/write the speed of this port. This attribure is read-only for all the Ports on AT-37XX product . This Attribute is read…	column	Enumeration	`.1.3.6.1.4.1.207.8.10.3.1.1.6`
atswitchPortState mandatory This attribute allows an administrative request to disable or enable communications on this port.It also responds with the status of the port .Except enabled(1) and disabled(2),…	column	Enumeration	`.1.3.6.1.4.1.207.8.10.3.1.1.7`
atswitchPortTransmitPacingConfig mandatory This Object is supported on AT36XX product line Only. This attribute allows the transmit Pacing to be enabled or disabled.	column	Enumeration	`.1.3.6.1.4.1.207.8.10.3.1.1.8`
atswitchPortSTPConfig mandatory This attribute allows a bridging Mode to be configured with either Spanning Tree enabled or disabled. When Spanning tree is enabled, make sure that this port is belonging to a val…	column	Enumeration	`.1.3.6.1.4.1.207.8.10.3.1.1.9`

Indexes