atswitchBrStpTopChanges
ATSWTCH2-MIB ·
.1.3.6.1.4.1.207.8.10.9.2.1.1.5
Object
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
Context
- MIB
- ATSWTCH2-MIB
- OID
.1.3.6.1.4.1.207.8.10.9.2.1.1.5- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- atswitchBrStpEntry
- Table
- atswitchBrStpTable
- Siblings
- 14
Syntax
RFC1155-SMICounter
- Source
- RFC1155-SMICounter
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atswitchBrStpLanId mandatory This object uniquely identifies the lan or
Virtual lan. | column | Integer32 | .1.3.6.1.4.1.207.8.10.9.2.1.1.1 |
| atswitchBrStpHelloTime mandatory The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hund… | column | Timeout | .1.3.6.1.4.1.207.8.10.9.2.1.1.10 |
| atswitchBrStpHoldTime mandatory This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second. | column | Integer32 | .1.3.6.1.4.1.207.8.10.9.2.1.1.11 |
| atswitchBrStpForwardDelay mandatory This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines h… | column | Timeout | .1.3.6.1.4.1.207.8.10.9.2.1.1.12 |
| atswitchBrStpBridgeMaxAge mandatory The value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
ats… | column | Integer32 | .1.3.6.1.4.1.207.8.10.9.2.1.1.13 |
| atswitchBrStpBridgeHelloTime mandatory The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may retu… | column | Integer32 | .1.3.6.1.4.1.207.8.10.9.2.1.1.14 |
| atswitchBrStpBridgeForwardDelay mandatory The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value … | column | Integer32 | .1.3.6.1.4.1.207.8.10.9.2.1.1.15 |
| atswitchBrStpProtocolSpecification mandatory An indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementat… | column | Enumeration | .1.3.6.1.4.1.207.8.10.9.2.1.1.2 |
| atswitchBrStpPriority mandatory The value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the valu… | column | Integer32 | .1.3.6.1.4.1.207.8.10.9.2.1.1.3 |
| atswitchBrStpTimeSinceTopologyChange mandatory The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.207.8.10.9.2.1.1.4 |
| atswitchBrStpDesignatedRoot mandatory The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter i… | column | BridgeId | .1.3.6.1.4.1.207.8.10.9.2.1.1.6 |
| atswitchBrStpRootCost mandatory The cost of the path to the root as seen from
this bridge. | column | Integer32 | .1.3.6.1.4.1.207.8.10.9.2.1.1.7 |
| atswitchBrStpRootPort mandatory The port number of the port which offers the
lowest cost path from this bridge to the root
bridge. | column | Integer32 | .1.3.6.1.4.1.207.8.10.9.2.1.1.8 |
| atswitchBrStpMaxAge mandatory The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value th… | column | Timeout | .1.3.6.1.4.1.207.8.10.9.2.1.1.9 |