atmfDS1E1CESMapVCI

ATMF-CES-MIB · .1.3.6.1.4.1.353.5.2.1.1.1.3

MIB view Table view

Object

column SNMPv2-SMIInteger32

The value of this object is equal to the VCI used
for the emulated circuit represented by this entry
in the ifTable.  If there is no connection, this
object is meaningless and will have the value zero

Context

MIB: ATMF-CES-MIB
OID: .1.3.6.1.4.1.353.5.2.1.1.1.3
Type: column
Access: readonly
Status: current
Parent: atmfDS1E1CESConfEntry
Table: atmfDS1E1CESConfTable
Siblings: 9

Syntax

SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
atmfDS1E1CESMapATMIndex The value of this object is equal to MIB II's ifIndex value of the ATM Port interface mapped through this CES to a CBR interface.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.353.5.2.1.1.1.1`
atmfDS1E1CESCellLossIntegrationPeriod The time in milliseconds for the cell loss integration period. If a cells are lost for this period of time. atmfDS1E1CESCellLossStatus is set to loss (2).The mandatory definition…	column	Integer32	`.1.3.6.1.4.1.353.5.2.1.1.1.10`
atmfDS1E1CESMapVPI The value of this object is equal to the VPI used for the emulated circuit represented by this entry in the ifTable. If there is no connection, this object is meaningless and wil…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.353.5.2.1.1.1.2`
atmfDS1E1CESCBRService Define if DS1/E1 service as structured or not. A structured(2) interface is some nx64Kbps. An unstructured (1) interface is 1.544Mbps or 2.048Mbps. unstructured(1) passes all bit…	column	Enumeration	`.1.3.6.1.4.1.353.5.2.1.1.1.4`
atmfDS1E1CESCBRClockMode Define if DS1/E1 service clocking mode. This maps into transmit clock source of CBR interface.	column	Enumeration	`.1.3.6.1.4.1.353.5.2.1.1.1.5`
atmfDS1E1CESCas This parameter selects which AAL1 Format should be used: Basic does not carry CAS bits, and uses a single 125 usec frame. E1Cas, Ds1SfCas and DS1EsfCas carry CAS bits in a multifr…	column	Enumeration	`.1.3.6.1.4.1.353.5.2.1.1.1.6`
atmfDS1E1CESPartialFill If partial cell fill is used, the number of user octets per cell must be set with this parameter. Setting this parameter to zero disables partial cell fill, and causes all cells …	column	Integer32	`.1.3.6.1.4.1.353.5.2.1.1.1.7`
atmfDS1E1CESBufMaxSize Define maximum size in octets of the reassembly buffer. Some implementations may want allow the maximum buffer size to programmed to a size less than the physical limit to reduce…	column	Integer32	`.1.3.6.1.4.1.353.5.2.1.1.1.8`
atmfDS1E1CESCDVRxT UNITS `10usec'. The maximum cell arrival jitter in 10usec increments that the reassembly process will tolerate in the cell stream without producing errors in the CBR service inter…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.353.5.2.1.1.1.9`