atmfDS1E1CESCellLossIntegrationPeriod
ATMF-CES-MIB ·
.1.3.6.1.4.1.353.5.2.1.1.1.10
Object
column
r/w
Integer32
The time in milliseconds for the cell loss integration period. If a cells are lost for this period of time. atmfDS1E1CESCellLossStatus is set to loss (2).The mandatory definition is 2500 UNITS `msec'
Context
- MIB
- ATMF-CES-MIB
- OID
.1.3.6.1.4.1.353.5.2.1.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- atmfDS1E1CESConfEntry
- Table
- atmfDS1E1CESConfTable
- Siblings
- 9
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1000-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmfDS1E1CESMapATMIndex The value of this object is equal to MIB II's
ifIndex value of the ATM Port interface mapped
through this CES to a CBR interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.353.5.2.1.1.1.1 |
| atmfDS1E1CESMapVPI The value of this object is equal to the VPI used
for the emulated circuit represented by this entry
in the ifTable. If there is no connection, this
object is meaningless and wil… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.353.5.2.1.1.1.2 |
| atmfDS1E1CESMapVCI The value of this object is equal to the VCI used
for the emulated circuit represented by this entry
in the ifTable. If there is no connection, this
object is meaningless and wil… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.353.5.2.1.1.1.3 |
| atmfDS1E1CESCBRService Define if DS1/E1 service as structured or not. A
structured(2) interface is some nx64Kbps. An unstructured
(1) interface is 1.544Mbps or 2.048Mbps. unstructured(1)
passes all bit… | column | Enumeration | .1.3.6.1.4.1.353.5.2.1.1.1.4 |
| atmfDS1E1CESCBRClockMode Define if DS1/E1 service clocking mode. This maps into
transmit clock source of CBR interface. | column | Enumeration | .1.3.6.1.4.1.353.5.2.1.1.1.5 |
| atmfDS1E1CESCas This parameter selects which AAL1 Format should be used:
Basic does not carry CAS bits, and uses a single 125 usec frame.
E1Cas, Ds1SfCas and DS1EsfCas carry CAS bits in a multifr… | column | Enumeration | .1.3.6.1.4.1.353.5.2.1.1.1.6 |
| atmfDS1E1CESPartialFill If partial cell fill is used, the number of user octets per
cell must be set with this parameter. Setting this parameter
to zero disables partial cell fill, and causes all cells … | column | Integer32 | .1.3.6.1.4.1.353.5.2.1.1.1.7 |
| atmfDS1E1CESBufMaxSize Define maximum size in octets of the reassembly buffer.
Some implementations may want allow the maximum buffer size to
programmed to a size less than the physical limit to reduce… | column | Integer32 | .1.3.6.1.4.1.353.5.2.1.1.1.8 |
| atmfDS1E1CESCDVRxT UNITS `10usec'. The maximum cell arrival jitter in 10usec increments that
the reassembly process will tolerate in the cell stream without
producing errors in the CBR service inter… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.353.5.2.1.1.1.9 |