atmfAtmLayerNniSigVersion

ATM-FORUM-MIB · .1.3.6.1.4.1.353.2.2.1.1.12
MIB view Table view

Object

column mandatory Enumeration 
An indication of the latest version of the ATM Forum
PNNI Signalling Specification that is supported on this
ATM Interface. Note that the PNNI routing version is not
determined through ILMI.
              
If the peer IME's value of this object is the same as,
or later than the local IME's value, then the version
corresponding to the local IME's value should be
attempted.  Otherwise, if the peer IME's value of this
object is earlier, and supported locally, then the
local IME should attempt the version corresponding to
the peer IME's value.  Otherwise, compatibility of the
two IMEs cannot be assumed.

Context

MIB
ATM-FORUM-MIB
OID
.1.3.6.1.4.1.353.2.2.1.1.12
Type
column
Access
readonly
Status
mandatory
Parent
atmfAtmLayerEntry
Table
atmfAtmLayerTable
Siblings
14

Syntax

Enumeration

Values & Constraints

Enumerated Values
1unsupported
2iisp
3pnniVersion1point0

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
atmfAtmLayerIndex mandatory
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received.
columnInteger32.1.3.6.1.4.1.353.2.2.1.1.1
atmfAtmLayerDeviceType mandatory
This object determines the type of the ATM device. This object is used in automatic ATM Interface-Type determination procedure such that a correct operational ATM Interface-type c…
columnEnumeration.1.3.6.1.4.1.353.2.2.1.1.10
atmfAtmLayerIlmiVersion mandatory
An indication of the latest version of the ATM Forum ILMI Specification that is supported on this ATM Interface. If the peer IME's value of this object is the same …
columnEnumeration.1.3.6.1.4.1.353.2.2.1.1.11
atmfAtmLayerMaxSvpcVpi mandatory
The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual path connections.
columnInteger32.1.3.6.1.4.1.353.2.2.1.1.13
atmfAtmLayerMaxSvccVpi mandatory
The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual channel connections.
columnInteger32.1.3.6.1.4.1.353.2.2.1.1.14
atmfAtmLayerMinSvccVci mandatory
This is the minimum VCI value that the signalling stack is configured to support for allocation to switched virtual channel connections. The same value applies to all SVCC VPI va…
columnInteger32.1.3.6.1.4.1.353.2.2.1.1.15
atmfAtmLayerMaxVPCs mandatory
The maximum number of switched and permanent VPCs supported on this ATM Interface. For virtual interfaces (i.e. Virtual Path Connections), the maximum number of VPCs PNNI may comm…
columnInteger32.1.3.6.1.4.1.353.2.2.1.1.2
atmfAtmLayerMaxVCCs mandatory
The maximum number of switched and permanent VCCs supported on this ATM Interface.
columnInteger32.1.3.6.1.4.1.353.2.2.1.1.3
atmfAtmLayerConfiguredVPCs mandatory
The number of permanent VPCs configured for use on this ATM Interface. For virtual interfaces (i.e. Virtual Path Connections used by PNNI), the maximum number of VPCs is set to ze…
columnInteger32.1.3.6.1.4.1.353.2.2.1.1.4
atmfAtmLayerConfiguredVCCs mandatory
The number of permanent VCCs configured for use on this ATM Interface.
columnInteger32.1.3.6.1.4.1.353.2.2.1.1.5
atmfAtmLayerMaxVpiBits mandatory
The maximum number of active VPI bits on this ATM Interface. For virtual interfaces (i.e. Virtual Path Connections used by PNNI), this value has no meaning and is set to zero.
columnInteger32.1.3.6.1.4.1.353.2.2.1.1.6
atmfAtmLayerMaxVciBits mandatory
The maximum number of active VCI bits on this ATM Interface.
columnInteger32.1.3.6.1.4.1.353.2.2.1.1.7
atmfAtmLayerUniType mandatory
The type of the ATM device, either public or private.
columnEnumeration.1.3.6.1.4.1.353.2.2.1.1.8
atmfAtmLayerUniVersion mandatory
An indication of the latest version of the ATM Forum UNI Signalling Specification that is supported on this ATM Interface. If this value is not present, a version of the UNI earl…
columnEnumeration.1.3.6.1.4.1.353.2.2.1.1.9