atmfVpcAbrTransmitCdf
ATM-FORUM-ILMI40-MIB ·
.1.3.6.1.4.1.353.2.9.1.1.6
Object
column
mandatory
Enumeration
Cutoff Decrease Factor: This field controls the rate decrease associated with lost or delayed backward RM cells. Larger values result in faster rate decrease. The default value is cdfOneOver16(4).
Context
- MIB
- ATM-FORUM-ILMI40-MIB
- OID
.1.3.6.1.4.1.353.2.9.1.1.6- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- atmfVpcAbrEntry
- Table
- atmfVpcAbrTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | cdf0 |
2 | cdfOneOver64 |
3 | cdfOneOver32 |
4 | cdfOneOver16 |
5 | cdfOneOver8 |
6 | cdfOneOver4 |
7 | cdfOneOver2 |
8 | cdfOne |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmfVpcAbrPortIndex mandatory The value of 0 which has the special meaning of identifying
the ATM Interface over which this message was received. | column | Integer32 | .1.3.6.1.4.1.353.2.9.1.1.1 |
| atmfVpcAbrTransmitCrm mandatory RM Cells Before Cutoff: Limits the number of forward
RM-cells which may be sent in the absence of received
backward RM-cells. | column | Integer32 | .1.3.6.1.4.1.353.2.9.1.1.10 |
| atmfVpcAbrVpi mandatory The VPI value of this ABR Virtual Path Connection at the
local ATM Interface. | column | Integer32 | .1.3.6.1.4.1.353.2.9.1.1.2 |
| atmfVpcAbrTransmitIcr mandatory Initial Cell Rate: This is the rate at which the
source starts, both initially and after an idle period.
The unit is cells per second. The value must not be
larger than PCR, and … | column | Integer32 | .1.3.6.1.4.1.353.2.9.1.1.3 |
| atmfVpcAbrTransmitNrm mandatory The maximum number of data cells a source may send
for each forward RM-cell. The default value is nrm32(5). | column | Enumeration | .1.3.6.1.4.1.353.2.9.1.1.4 |
| atmfVpcAbrTransmitTrm mandatory Upper bound on the time between forward RM-cells for
an active source (in milliseconds). The default value
is trm100(8). | column | Enumeration | .1.3.6.1.4.1.353.2.9.1.1.5 |
| atmfVpcAbrTransmitRif mandatory Rate Increment Factor: Controls the rate at which the rate
increases, when a backward RM-cell is received with CI=0 and
NI=0. Larger values lead to faster rate increase. The def… | column | Enumeration | .1.3.6.1.4.1.353.2.9.1.1.7 |
| atmfVpcAbrTransmitRdf mandatory Rate Decrease Factor: Controls the rate decrease
which occurs when backward RM-cells with CI=1, are
received. Larger values lead to faster rate
decrease. The default value is rd… | column | Enumeration | .1.3.6.1.4.1.353.2.9.1.1.8 |
| atmfVpcAbrTransmitAdtf mandatory ACR Decrease Time Factor: Time permitted between
sending RM-cells, before the allowed rate (ACR) is
decreased to ICR. Range is 10 ms to 10.23 seconds.
The unit is 10 milliseconds… | column | Integer32 | .1.3.6.1.4.1.353.2.9.1.1.9 |