atmfAtmLayerDeviceType
ATM-FORUM-ILMI40-MIB ·
.1.3.6.1.4.1.353.2.2.1.1.10
Object
column
mandatory
Enumeration
This object determines the type of the ATM device. This object is used in automatic ATM Interface-Type determination procedure such that a correct operational ATM Interface-type can be determined. An ATM End System shall take the value of user(1), and an ATM network node shall take the value of node(2).
Context
- MIB
- ATM-FORUM-ILMI40-MIB
- OID
.1.3.6.1.4.1.353.2.2.1.1.10- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- atmfAtmLayerEntry
- Table
- atmfAtmLayerTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | user |
2 | node |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmfAtmLayerIndex mandatory The value of 0 which has the special meaning of
identifying the ATM Interface over which this message
was received. | column | Integer32 | .1.3.6.1.4.1.353.2.2.1.1.1 |
| atmfAtmLayerIlmiVersion mandatory An indication of the latest version of the ATM Forum
ILMI Specification that is supported on this ATM Interface.
If the peer IME's value of this object is the same … | column | Enumeration | .1.3.6.1.4.1.353.2.2.1.1.11 |
| atmfAtmLayerNniSigVersion mandatory An indication of the latest version of the ATM Forum
PNNI Signalling Specification that is supported on this
ATM Interface. Note that the PNNI routing version is not
determined th… | column | Enumeration | .1.3.6.1.4.1.353.2.2.1.1.12 |
| atmfAtmLayerMaxSvpcVpi mandatory The maximum VPI that the signalling stack on the ATM
interface is configured to support for allocation to
switched virtual path connections. | column | Integer32 | .1.3.6.1.4.1.353.2.2.1.1.13 |
| atmfAtmLayerMaxSvccVpi mandatory The maximum VPI that the signalling stack on the ATM
interface is configured to support for allocation to
switched virtual channel connections. | column | Integer32 | .1.3.6.1.4.1.353.2.2.1.1.14 |
| atmfAtmLayerMinSvccVci mandatory This is the minimum VCI value that the
signalling stack is configured to support for
allocation to switched virtual channel connections. The same
value applies to all SVCC VPI va… | column | Integer32 | .1.3.6.1.4.1.353.2.2.1.1.15 |
| atmfAtmLayerMaxVPCs mandatory The maximum number of switched and permanent VPCs
supported on this ATM Interface. For virtual interfaces
(i.e. Virtual Path Connections), the maximum number of VPCs
PNNI may comm… | column | Integer32 | .1.3.6.1.4.1.353.2.2.1.1.2 |
| atmfAtmLayerMaxVCCs mandatory The maximum number of switched and permanent VCCs
supported on this ATM Interface. | column | Integer32 | .1.3.6.1.4.1.353.2.2.1.1.3 |
| atmfAtmLayerConfiguredVPCs mandatory The number of permanent VPCs configured for use on
this ATM Interface. For virtual interfaces (i.e. Virtual Path
Connections used by PNNI), the maximum number of VPCs
is set to ze… | column | Integer32 | .1.3.6.1.4.1.353.2.2.1.1.4 |
| atmfAtmLayerConfiguredVCCs mandatory The number of permanent VCCs configured for use on
this ATM Interface. | column | Integer32 | .1.3.6.1.4.1.353.2.2.1.1.5 |
| atmfAtmLayerMaxVpiBits mandatory The maximum number of active VPI bits on this ATM Interface.
For virtual interfaces (i.e. Virtual Path Connections used by PNNI),
this value has no meaning and is set to zero. | column | Integer32 | .1.3.6.1.4.1.353.2.2.1.1.6 |
| atmfAtmLayerMaxVciBits mandatory The maximum number of active VCI bits on this ATM Interface. | column | Integer32 | .1.3.6.1.4.1.353.2.2.1.1.7 |
| atmfAtmLayerUniType mandatory The type of the ATM device, either public or private. | column | Enumeration | .1.3.6.1.4.1.353.2.2.1.1.8 |
| atmfAtmLayerUniVersion mandatory An indication of the latest version of the ATM Forum UNI
Signalling Specification that is supported on this ATM
Interface. If this value is not present, a version of the UNI
earl… | column | Enumeration | .1.3.6.1.4.1.353.2.2.1.1.9 |