wsRogueAPMitigationLimit
AT-UWC-WLAN-SWITCH-MIB ·
.1.3.6.1.4.1.207.8.42.8.34.1.12.29
Object
scalar
SNMPv2-SMIUnsigned32
Maximum number of APs for which the system can send de-authentication frames.
Context
- MIB
- AT-UWC-WLAN-SWITCH-MIB
- OID
.1.3.6.1.4.1.207.8.42.8.34.1.12.29- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- wsGlobalStatus
- Siblings
- 39
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wsIPAddress This object represents wireless controller IP address.
When wireless mode is in disabled state, the value
of controller IP address is zero. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.207.8.42.8.34.1.12.1 |
| wsTotalRogueAPs Total number of Rogue APs detected on the WLAN. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.10 |
| wsTotalUnknownAPs Total number of Unknown APs detected on the WLAN. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.11 |
| wsMaximumManagedAPsInPeerGroup Maximum number of APs that can be managed by the wireless
controller when it acts as Cluster Controller. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.12 |
| wsTotalClients Total number of clients present in the network. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.13 |
| wsTotalAuthenticatedClients Total number of authenticated clients across
all APs managed by the controller. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.14 |
| wsMaximumAssociatedClients Maximum number of clients that can associate with the wireless system. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.15 |
| wsWLANUtilization Total network utilization across all APs managed by
this controller. This is based on global statistics. | scalar | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.16 |
| wsGlobalStatusRegulatoryDomainFor2GHz Regulatory domain for 2GHz frequency channels. | scalar | OctetString | .1.3.6.1.4.1.207.8.42.8.34.1.12.18 |
| wsGlobalStatusRegulatoryDomainFor5GHz Regulatory domain for 5GHz frequency channels. | scalar | OctetString | .1.3.6.1.4.1.207.8.42.8.34.1.12.19 |
| wsOperationalStatus Indicates the current operating status of the wireless
system. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.12.2 |
| wsGlobalPeerConfigRequestAction This action object is used to:
- start - Start the config push into all the peer controllers in the peer
group.
- Read on this object will always return none. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.12.20 |
| wsGlobalPeerConfigRequestStatus The global status for the configuration push operation to
one or more peer controllers. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.12.21 |
| wsGlobalPeerConfigReceiveStatus The global status when wireless configuration is received
from a peer controller. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.12.22 |
| wsGlobalPeerConfigSwitchIp IP Address of the last controller from which this controller received
any wireless configuration data. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.207.8.42.8.34.1.12.23 |
| wsGlobalPeerConfigReceived Indicates which portions of configuration were last received from a
peer controller. | scalar | Bits | .1.3.6.1.4.1.207.8.42.8.34.1.12.24 |
| wsGlobalPeerConfigReceivedTimestamp The last time this controller received any configuration data from a
peer controller. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.207.8.42.8.34.1.12.25 |
| wsClusterControllerIndicator Indicates if the controller is currently the Cluster Controller of the
peer group or not. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.12.26 |
| wsClusterController This object represents Cluster Controller's IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.207.8.42.8.34.1.12.27 |
| wsRogueAPMitigationCount Number of APs to which the wireless system is
currently sending de-authentication messages
to mitigate against rogue APs. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.28 |
| wsOperationalStatusDisableReason This object indicates the reason of operational status to be disabled.
Values 5 and 6 are applicable only if routing functionality present. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.12.3 |
| wsRogueAPAcknowledgeAll This is a command that allows the administrator
to clear out all rogue AP states in the RF Scan database | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.12.30 |
| wsTotalDetectedClients Total number of detected clients across
all APs managed by the controller. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.31 |
| wsMaximumDetectedClients Maximum number of clients that can be maintained
by the detected clients database. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.32 |
| wsMaximumDetectedClientPreAuthenticationHistoryEntries Maximum number of pre-authentication history entries that
can be recorded for all the detected clients present in
the detected client database. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.33 |
| wsTotalDetectedClientPreAuthenticationHistoryEntries Total number of pre-authentication history entries
accumulated for all the detected clients present in the
detected client database. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.34 |
| wsMaximumDetectedClientRoamHistoryEntries Maximum number of roam history entries that
can be recorded for all the detected clients present in
the detected client database. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.35 |
| wsTotalDetectedClientRoamHistoryEntries Total number of roam history entries accumulated for all
the detected clients present in the detected client database. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.36 |
| wsRegenerateX509CertificateAction This action object is used to:
- start - Start the certificate regeneration on the controller.
- Read on this object will always return none. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.12.37 |
| wsRegenerateX509CertificateStatus Status of regenerate X.509 certificates. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.12.38 |
| wsNetworkMutualAuthenticationStatus Status of the mutual authentication enable/disable command.
When status is Complete With Errors then the administrator
may need to provision some controllers or APs separately. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.12.39 |
| wsTotalPeerSwitches Total number of peer controllers detected on the
network. | scalar | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.4 |
| wsTotalProvisioningAPs Total number of APs present in
the AP Provisioning database. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.40 |
| wsMaximumProvisioningAPs Maximum number of APs that can be
maintained in the AP Provisioning
database. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.41 |
| wsTotalAPs Sum of all the WS managed APs, connection failed APs, and
discovered APs in the database. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.5 |
| wsTotalManagedAPs Total number of WS managed APs currently
authenticated to the controller. | scalar | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.6 |
| wsTotalStandaloneAPs Total number of trusted AP's in the standalone mode. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.7 |
| wsTotalDiscoveredAPs Number of APs that are connected to the controller,
but are not completely configured. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.8 |
| wsTotalConnectionFailedAPs Number of APs that were previously authenticated and managed,
but currently do not have connection with the controller. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.12.9 |