wsRFScanAPSecurityMode
AT-UWC-WLAN-SWITCH-MIB ·
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.13
Object
column
Enumeration
Indicates the security mode of an AP.
Context
- MIB
- AT-UWC-WLAN-SWITCH-MIB
- OID
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wsRFScanAPStatusEntry
- Table
- wsRFScanAPStatusTable
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | open |
2 | wep |
3 | wpa |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wsRFScanAPMacAddress The MAC address of the detected AP, this could be a
physical radio interface or VAP MAC. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.1 |
| wsRFScanAPDiscoveredAge Indicates timestamp in seconds when an AP was first detected. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.10 |
| wsRFScanAPAge Indicates time in seconds since an AP was last detected in the scan. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.11 |
| wsRFScanAPStatusInitial Indicates the initial status of an AP. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.12 |
| wsRFScanAPHighRate Indicates the highest supported rate advertised by an AP in Mbps. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.14 |
| wsRFScanAPDot11nMode Indicates whether 802.11n is supported by an AP. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.15 |
| wsRFScanAPAdHoc Indicates that the beacon frame was received from an ad hoc network for an AP. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.16 |
| wsRFScanAPPeerManaged Indicates that an AP is managed by a peer controller. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.17 |
| wsRFScanAPRogueMitigation Indicates whether rogue AP mitigation is in progress for an AP. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.18 |
| wsRFScanAPAcknowledgeRogue This is a command that allows the administrator to restore
the initial status for this AP in the RF Scan database.
Read on this object will always return no-action. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.19 |
| wsRFScanAPRadioInterface If status indicates a managed AP, this indicates the
radio interface on the Detected AP, if the value is
unknown (i.e. Rogue or third party APs) it is set to '0'. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.2 |
| wsRFScanAPBSSID BSSID advertised in the network. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.20 |
| wsRFScanAPOUI Manufacturer information for this AP. | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.21 |
| wsRFScanAPRRMSupported Advertised status of Radio Resource Management (RRM) capability. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.22 |
| wsRFScanAPDot11acMode Indicates whether 802.11ac is supported by an AP. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.23 |
| wsRFScanAPBaseMacAddress If status indicates a managed AP, this indicates the
base MAC address of the detected AP, If the value is
unknown (i.e. Rogue of third party AP's) it is set to '0'. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.3 |
| wsRFScanAPSSID Service Set Id of the detected network. | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.4 |
| wsRFScanAPPhysicalMode Indicates the 802.11 mode being used on an AP. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.5 |
| wsRFScanAPChannel Indicates transmit channel of an AP. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.6 |
| wsRFScanAPTxRate Indicates the rate at which an AP is currently
transmitting data, from 1 Mbit/s to 600 Mbit/s. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.7 |
| wsRFScanAPBeaconInterval Indicates beacon interval for a neighbor AP network. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.8 |
| wsRFScanAPStatus Indicates the managed status of an AP. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.9.1.1.9 |