wsRFScanAPAdHoc

AT-UWC-WLAN-SWITCH-MIB · .1.3.6.1.4.1.207.8.42.8.34.9.1.1.16
MIB view Table view

Object

column Enumeration 
Indicates that the beacon frame was received from an ad hoc network for an AP.

Context

MIB
AT-UWC-WLAN-SWITCH-MIB
OID
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.16
Type
column
Access
readonly
Status
current
Parent
wsRFScanAPStatusEntry
Table
wsRFScanAPStatusTable
Siblings
22

Syntax

Enumeration

Values & Constraints

Enumerated Values
0notadhoc
1adhoc

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wsRFScanAPMacAddress
The MAC address of the detected AP, this could be a physical radio interface or VAP MAC.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.207.8.42.8.34.9.1.1.1
wsRFScanAPDiscoveredAge
Indicates timestamp in seconds when an AP was first detected.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.207.8.42.8.34.9.1.1.10
wsRFScanAPAge
Indicates time in seconds since an AP was last detected in the scan.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.207.8.42.8.34.9.1.1.11
wsRFScanAPStatusInitial
Indicates the initial status of an AP.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.9.1.1.12
wsRFScanAPSecurityMode
Indicates the security mode of an AP.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.9.1.1.13
wsRFScanAPHighRate
Indicates the highest supported rate advertised by an AP in Mbps.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.207.8.42.8.34.9.1.1.14
wsRFScanAPDot11nMode
Indicates whether 802.11n is supported by an AP.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.9.1.1.15
wsRFScanAPPeerManaged
Indicates that an AP is managed by a peer controller.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.9.1.1.17
wsRFScanAPRogueMitigation
Indicates whether rogue AP mitigation is in progress for an AP.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.9.1.1.18
wsRFScanAPAcknowledgeRogue
This is a command that allows the administrator to restore the initial status for this AP in the RF Scan database. Read on this object will always return no-action.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.9.1.1.19
wsRFScanAPRadioInterface
If status indicates a managed AP, this indicates the radio interface on the Detected AP, if the value is unknown (i.e. Rogue or third party APs) it is set to '0'.
columnInteger32.1.3.6.1.4.1.207.8.42.8.34.9.1.1.2
wsRFScanAPBSSID
BSSID advertised in the network.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.207.8.42.8.34.9.1.1.20
wsRFScanAPOUI
Manufacturer information for this AP.
columnOctetString.1.3.6.1.4.1.207.8.42.8.34.9.1.1.21
wsRFScanAPRRMSupported
Advertised status of Radio Resource Management (RRM) capability.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.9.1.1.22
wsRFScanAPDot11acMode
Indicates whether 802.11ac is supported by an AP.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.9.1.1.23
wsRFScanAPBaseMacAddress
If status indicates a managed AP, this indicates the base MAC address of the detected AP, If the value is unknown (i.e. Rogue of third party AP's) it is set to '0'.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.207.8.42.8.34.9.1.1.3
wsRFScanAPSSID
Service Set Id of the detected network.
columnOctetString.1.3.6.1.4.1.207.8.42.8.34.9.1.1.4
wsRFScanAPPhysicalMode
Indicates the 802.11 mode being used on an AP.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.9.1.1.5
wsRFScanAPChannel
Indicates transmit channel of an AP.
columnInteger32.1.3.6.1.4.1.207.8.42.8.34.9.1.1.6
wsRFScanAPTxRate
Indicates the rate at which an AP is currently transmitting data, from 1 Mbit/s to 600 Mbit/s.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.207.8.42.8.34.9.1.1.7
wsRFScanAPBeaconInterval
Indicates beacon interval for a neighbor AP network.
columnInteger32.1.3.6.1.4.1.207.8.42.8.34.9.1.1.8
wsRFScanAPStatus
Indicates the managed status of an AP.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.9.1.1.9