wsPowerManualProposedAdjustmentTable

AT-UWC-WLAN-SWITCH-MIB · .1.3.6.1.4.1.207.8.42.8.34.5.8

Object

table obsolete

This table represents the proposed power adjustment
status parameters. These parameters are displayed
only when power adjustment mode is set to manual.
The administrator manually apply all of the proposed
power adjustments displayed.

Context

MIB: AT-UWC-WLAN-SWITCH-MIB
OID: .1.3.6.1.4.1.207.8.42.8.34.5.8
Type: table
Status: obsolete
Parent: rfManagement
Siblings: 25
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
wsChannelPlanTable This table displays the channel plan parameters.	table	-	`.1.3.6.1.4.1.207.8.42.8.34.5.1`
wsPowerPlanAvgNumInterferingAPs The average number of managed radios detected by every operational mode radio in the cluster.	scalar	Integer32	`.1.3.6.1.4.1.207.8.42.8.34.5.10`
wsPowerPlanAvgNumInterferingVAPs The average number of managed virtual APs detected by every operational mode radio in the cluster.	scalar	Integer32	`.1.3.6.1.4.1.207.8.42.8.34.5.11`
wsPowerPlanAPNumOpRadios The number of operational mode radios in the cluster. The sentry and disabled radios are not counted.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.207.8.42.8.34.5.12`
wsPowerPlanAPNumPwrCycles Number of power plan cycles executed by the controller.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.207.8.42.8.34.5.13`
wsPowerPlanGlobalNumPwrChanges Number of transmit power changes done by the power plan algorithm for all radios in the cluster.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.207.8.42.8.34.5.14`
wsPowerPlanGlobalNumPwrInc Number of transmit power increases done by the power plan algorithm for all radios in the cluster.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.207.8.42.8.34.5.15`
wsPowerPlanGlobalNumPwrDec Number of transmit power reductions done by the power plan algorithm for all radios in the cluster.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.207.8.42.8.34.5.16`
wsPowerPlanTimeSinceLastPowerPLan Time since the last power plan was done. The power plan could have been triggered manually or automatically.	scalar	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.207.8.42.8.34.5.17`
wsChannelPlanPerRadioPerBandTable This table contains the per band per radio channel plan status for a Managed AP.	table	-	`.1.3.6.1.4.1.207.8.42.8.34.5.18`
wsPowerPlanPerRadioTable This table contains the per radio Power Plan Status for a Managed AP .	table	-	`.1.3.6.1.4.1.207.8.42.8.34.5.19`
wsChannelPlanHistoryTable obsolete This table contains parameters related to channel plan algorithm history, each entry indicates a previously computed and applied channel adjustment for the specified iteration. Th…	table	-	`.1.3.6.1.4.1.207.8.42.8.34.5.2`
wsPowerPlanPerProfileTable This table contains the per profile power plan status.	table	-	`.1.3.6.1.4.1.207.8.42.8.34.5.20`
wsNtwProvisoningAction This action object is used to: - start the network provision. - stop the network provision.	scalar	Enumeration	`.1.3.6.1.4.1.207.8.42.8.34.5.21`
wsNtwProvisioningOperatingStatus The Operational Status of the Initial Network Provisioning Protocol.	scalar	Enumeration	`.1.3.6.1.4.1.207.8.42.8.34.5.22`
wsNtwProvisioningTimeStamp Number of seconds the latest invocation of the protocol has been running.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.207.8.42.8.34.5.23`
wsNtwProvisioningChanBGCompletion Percent complete for the channel protocol in the 2.4 GHz band.	scalar	Integer32	`.1.3.6.1.4.1.207.8.42.8.34.5.24`
wsNtwProvisioningChanACompletion Percent complete for the channel protocol in the 5GHz band.	scalar	Integer32	`.1.3.6.1.4.1.207.8.42.8.34.5.25`
wsNtwProvisioningPowerPlanCnt Count-Down of how many power plan interations remain to be done.	scalar	Integer32	`.1.3.6.1.4.1.207.8.42.8.34.5.26`
wsChannelPlanManualProposedAdjustmentTable obsolete This table contains parameters related to proposed channel plan adjustment. These parameters are applicable only when channel plan mode is manual.	table	-	`.1.3.6.1.4.1.207.8.42.8.34.5.3`
wsPowerAdjustmentMode Flag to set automatic power adjustment for all managed AP radios. If power adjustment mode is interval, periodically calculate the power adjustments and apply them. However, if po…	scalar	Enumeration	`.1.3.6.1.4.1.207.8.42.8.34.5.4`
wsPowerAdjustmentStrength Power Plan signal strength threshold in dBm.	scalar	Integer32	`.1.3.6.1.4.1.207.8.42.8.34.5.5`
wsPowerManualProposedAdjustmentAction This action object is used to: - Run the Proposed Power Adjustment alogorithm - Apply the same to network. - Clear the calculated power plan. Read on this object will always retur…	scalar	Enumeration	`.1.3.6.1.4.1.207.8.42.8.34.5.6`
wsManualPowerAdjustmentStatus obsolete Indicates the current state of a manual request to compute or apply proposed power adjustments.	scalar	Enumeration	`.1.3.6.1.4.1.207.8.42.8.34.5.7`
wsPowerPlanOperatingStatus The Operational Status of the Power Plan Algorithm.	scalar	Enumeration	`.1.3.6.1.4.1.207.8.42.8.34.5.9`

Child Objects