wsNtwProvisoningAction
AT-UWC-WLAN-SWITCH-MIB ·
.1.3.6.1.4.1.207.8.42.8.34.5.21
Object
scalar
r/w
Enumeration
This action object is used to: - start the network provision. - stop the network provision.
Context
- MIB
- AT-UWC-WLAN-SWITCH-MIB
- OID
.1.3.6.1.4.1.207.8.42.8.34.5.21- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rfManagement
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | none |
1 | start |
2 | stop |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wsChannelPlanTable This table displays the channel plan parameters. | table | - | .1.3.6.1.4.1.207.8.42.8.34.5.1 |
| wsPowerPlanAvgNumInterferingAPs The average number of managed radios detected by every operational mode radio in the cluster. | scalar | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.5.10 |
| wsPowerPlanAvgNumInterferingVAPs The average number of managed virtual APs detected by every operational mode radio in the cluster. | scalar | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.5.11 |
| wsPowerPlanAPNumOpRadios The number of operational mode radios in the cluster. The sentry and disabled radios are not counted. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.42.8.34.5.12 |
| wsPowerPlanAPNumPwrCycles Number of power plan cycles executed by the controller. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.42.8.34.5.13 |
| wsPowerPlanGlobalNumPwrChanges Number of transmit power changes done by the power plan algorithm for all radios in the cluster. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.42.8.34.5.14 |
| wsPowerPlanGlobalNumPwrInc Number of transmit power increases done by the power plan algorithm for all radios in the cluster. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.42.8.34.5.15 |
| wsPowerPlanGlobalNumPwrDec Number of transmit power reductions done by the power plan algorithm for all radios in the cluster. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.42.8.34.5.16 |
| wsPowerPlanTimeSinceLastPowerPLan Time since the last power plan was done. The power plan could have been triggered manually or automatically. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.207.8.42.8.34.5.17 |
| wsChannelPlanPerRadioPerBandTable This table contains the per band per radio channel plan status for a Managed AP. | table | - | .1.3.6.1.4.1.207.8.42.8.34.5.18 |
| wsPowerPlanPerRadioTable This table contains the per radio Power Plan Status for a Managed AP . | table | - | .1.3.6.1.4.1.207.8.42.8.34.5.19 |
| wsChannelPlanHistoryTable obsolete This table contains parameters related to
channel plan algorithm history, each entry
indicates a previously computed and applied
channel adjustment for the specified iteration.
Th… | table | - | .1.3.6.1.4.1.207.8.42.8.34.5.2 |
| wsPowerPlanPerProfileTable This table contains the per profile power plan status. | table | - | .1.3.6.1.4.1.207.8.42.8.34.5.20 |
| wsNtwProvisioningOperatingStatus The Operational Status of the Initial Network Provisioning Protocol. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.5.22 |
| wsNtwProvisioningTimeStamp Number of seconds the latest invocation of the protocol has been running. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.42.8.34.5.23 |
| wsNtwProvisioningChanBGCompletion Percent complete for the channel protocol in the 2.4 GHz band. | scalar | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.5.24 |
| wsNtwProvisioningChanACompletion Percent complete for the channel protocol in the 5GHz band. | scalar | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.5.25 |
| wsNtwProvisioningPowerPlanCnt Count-Down of how many power plan interations remain to be done. | scalar | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.5.26 |
| wsChannelPlanManualProposedAdjustmentTable obsolete This table contains parameters related to
proposed channel plan adjustment. These parameters
are applicable only when channel plan mode
is manual. | table | - | .1.3.6.1.4.1.207.8.42.8.34.5.3 |
| wsPowerAdjustmentMode Flag to set automatic power adjustment for
all managed AP radios. If power adjustment mode is interval,
periodically calculate the power adjustments and apply them.
However, if po… | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.5.4 |
| wsPowerAdjustmentStrength Power Plan signal strength threshold in dBm. | scalar | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.5.5 |
| wsPowerManualProposedAdjustmentAction This action object is used to:
- Run the Proposed Power Adjustment alogorithm
- Apply the same to network.
- Clear the calculated power plan.
Read on this object will always retur… | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.5.6 |
| wsManualPowerAdjustmentStatus obsolete Indicates the current state of a manual request
to compute or apply proposed power adjustments. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.5.7 |
| wsPowerManualProposedAdjustmentTable obsolete This table represents the proposed power adjustment
status parameters. These parameters are displayed
only when power adjustment mode is set to manual.
The administrator manually … | table | - | .1.3.6.1.4.1.207.8.42.8.34.5.8 |
| wsPowerPlanOperatingStatus The Operational Status of the Power Plan Algorithm. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.5.9 |