wsNetworkDenyBcastMode
AT-UWC-WLAN-SWITCH-MIB ·
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.6
Object
column
Enumeration
If client broadcasts probe requests to all available SSIDs this option controls whether or not the system will respond to the probe request. The 'disable' mode means that the system responds.
Context
- MIB
- AT-UWC-WLAN-SWITCH-MIB
- OID
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wsNetworkEntry
- Table
- wsNetworkTable
- Siblings
- 37
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wsNetworkId Network Id used to uniquely identify the network. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.1 |
| wsNetworkMACAuthenticationMode This object indicates mode to disable, or enable and specify lookup method for
authentication via client MAC address. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.10 |
| wsNetworkRadiusAccountingMode Flag to enable/disable RADIUS accounting authentication
for users on this network. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.14 |
| wsNetworkSecurityMode Specifies authentication and encryption mode on
this network. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.15 |
| wsNetworkWPAVersionsSupported If Wi-Fi Protected Access(WPA) encryption mode is enabled,
this object indicates the versions of WPA allowed by
clients on this network. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.16 |
| wsNetworkWPACipherSuites If WPA encryption mode is enabled, this object indicates which
encryption solutions to use for WPA clients. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.17 |
| wsNetworkWPAKeyType If WPA-SharedKey security mode is enabled, this object specifies
the type of the WPA key configured. Only ascii key type
is supported for this release. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.18 |
| wsNetworkWPAKey If WPA-SharedKey security mode is enabled, this object specifies
the pre-shared secret for WPA clients.
For ASCII - 8-63 characters. | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.19 |
| wsNetworkIdRowStatus Add Network ID to the network configuration table.
The first 16 network configurations are created by default,
they are applied to VAP-0 through VAP-15 in order on each
radio when… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.2 |
| wsNetworkWPA2PreAuthenticationMode If WPA2 encryption is enabled, flag to enable/disable
pre-authentication support for roaming WPA2 clients. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.20 |
| wsNetworkWPA2PreAuthenticationLimit If WPA2 pre-authentication is enabled, this object specifies a
limit on the number of APs within the peer group
to which one client is allowed to be pre-authenticate. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.21 |
| wsNetworkWPA2RoambackKeyCacheHoldtime Length of time in minutes a PMK will be cached by an AP after the client
using this PMK has roamed away from this AP. Length of time
a PMK will be cached by an AP after the PMK ha… | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.23 |
| wsNetworkStaticWEPAuthenticationMode Indicates security configuration for static WEP. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.24 |
| wsNetworkUseWEPTransferKeyIndex If wsNetSecurityMode is wepSharedKey, this object indicates
which Wired Equivalent Privacy(WEP) algorithm network
will use for encryption. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.25 |
| wsNetworkWEPKeyType If WEP-SharedKey security mode is enabled, this object specifies
the type WEP key configured. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.26 |
| wsNetworkWEPKeyLength If WEP-SharedKey security mode is enabled, this object specifies
number of bits for the WEP key. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.27 |
| wsNetworkWEPKey1 If WEP-SharedKey security mode is enabled, this object specifies
the key for WEP clients.
Minimum characters required for key based on key
type/length are:
For ASCII/64 - 5 ch… | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.28 |
| wsNetworkWEPKey2 If WEP-SharedKey security mode is enabled, this object specifies
the key for WEP clients.
Minimum characters required for key based on key
type/length are:
For ASCII/64 - 5 ch… | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.29 |
| wsNetworkSSID This object indicates Service Set ID specific to this Network.
The first network is configured with a default SSID 'Guest Network',
the rest of the networks have default SSIDs ass… | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.3 |
| wsNetworkWEPKey3 If WEP-SharedKey security mode is enabled, specifies
the key for WEP clients.
Minimum characters required for key based on key
type/length are:
For ASCII/64 - 5 characters
… | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.30 |
| wsNetworkWEPKey4 If WEP-SharedKey security mode is enabled, this object specifies
the key for WEP clients.
Minimum characters required for key based on key
type/length are:
For ASCII/64 - 5 ch… | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.31 |
| wsClearNetworkEntry This is an action object. Setting this object to
enable will set Network Id configuration to default
configuration. Read on this object will always return disable. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.33 |
| wsNetworkRedirectMode deprecated Specifies the redirect mode on
this network. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.34 |
| wsNetworkRedirectURL deprecated This object indicates HTTP Redirect URL on the Network Id. | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.35 |
| wsIfNumber A unique value to identify the wireless network interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.36 |
| wsNetworkAuthRadiusServerName The name of the RADIUS server used for client
authentications. | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.37 |
| wsNetworkAuthRadiusServerConfiguredStatus Indicates whether the specified named RADIUS Authentication
server is configured in the RADIUS Client configuration. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.38 |
| wsNetworkAcctRadiusServerName The name of the RADIUS server used for reporting wireless
client associations and disassociations. | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.39 |
| wsNetworkDefaultVLANId Default VLAN Id assigned to the Network. The default VLAN
is used if RADIUS based authentication is not configured for
the network or the RADIUS server does not return a VLAN for
… | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.4 |
| wsNetworkAcctRadiusServerConfiguredStatus Indicates whether the specified named RADIUS Accounting
server is configured in the RADIUS Client configuration. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.40 |
| wsUseNetworkRadiusConfig This flag controls whether the VAP uses the network RADIUS
configuration or global RADIUS configuration. When enabled,
network RADIUS configuration shall be used. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.41 |
| wsNetworkDistTunnelMode Flag to enable/disable Distributed Tunneling for this
Network. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.42 |
| wsNetworkBcastKeyRefreshRate The 802.1x broadcastkey refresh rate command specifies the interval after
which the broadcast keys are changed. | column | Unsigned32 | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.43 |
| wsNetworkSessionKeyRefreshRate The 802.1x SessionKey refresh rate command specifies the interval after
which the Unicast session keys are changed. This is applicable only dynamic WEP and
WPA Enterprise modes.Va… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.44 |
| wsNetworkARPSuppressionMode Flag to enable/disable Wireless ARP Suppression for this Network. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.45 |
| wsNetworkBandSteerMode Configure band steering on this VAP. To have band steering operationally enabled,
the following conditions should be met:
1. SSIDs on both VAPs should match.
2. One radio should… | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.46 |
| wsNetworkHideSSIDMode Flag to enable/disable inclusion of SSID in
AP beacons. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.8.1.5 |