wsNetworkClientQosBandwidthLimitUp
AT-UWC-WLAN-SWITCH-MIB ·
.1.3.6.1.4.1.207.8.42.8.34.3.9.1.2
Object
column
SNMPv2-SMIUnsigned32
Maximum bandwidth rate allowed for the wireless up (inbound)
direction from client to AP for this network, thus controlling
the maximum send rate to the AP for a wireless client. This
parameter is specified in bits-per-second (bps).
This object may be set to any value in the range 0-4294967295.
Any configured non-zero value is rounded down to the
nearest 64000 bps by the AP, but no lower than 64000. Setting
this object value to 0 disables bandwidth limiting in this
direction.
Context
- MIB
- AT-UWC-WLAN-SWITCH-MIB
- OID
.1.3.6.1.4.1.207.8.42.8.34.3.9.1.2- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- wsNetworkClientQosEntry
- Table
- wsNetworkClientQosTable
- Siblings
- 10
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wsNetworkClientQosBandwidthLimitDown Maximum bandwidth rate allowed for the wireless down (outbound)
direction from AP to client for this network, thus controlling
the maximum receive rate from the AP for a wireless … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.1 |
| wsNetworkClientQosDiffservPolicyUpName Name of the DiffServ policy to use in accordance with the
wsNetworkClientQosDiffservPolicyUpType as follows:
none(1) - This object is not used and must not be set.
… | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.10 |
| wsNetworkClientQosMode Flag to enable/disable AP quality-of-service for wireless clients
on this network. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.11 |
| wsNetworkClientQosAccessControlDownType Access list type used for the wireless down (outbound) direction from
AP to client for this network. Setting this object usually requires
that the wsNetworkClientQosAccessControl… | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.3 |
| wsNetworkClientQosAccessControlDownName Name of the access list to use in accordance with the
wsNetworkClientQosAccessControlDownType as follows:
none(1) - This object is not used and must not be set.
… | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.4 |
| wsNetworkClientQosAccessControlUpType Access list type used for the wireless up (inbound) direction from
client to AP for this network. Setting this object usually requires
that the wsNetworkClientQosAccessControlUpN… | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.5 |
| wsNetworkClientQosAccessControlUpName Name of the access list to use in accordance with the
wsNetworkClientQosAccessControlUpType as follows:
none(1) - This object is not used and must not be set.
… | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.6 |
| wsNetworkClientQosDiffservPolicyDownType DiffServ policy type used for the wireless down (outbound) direction from
AP to client for this network. Setting this object usually requires
that the wsNetworkClientQosDiffservP… | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.7 |
| wsNetworkClientQosDiffservPolicyDownName Name of the DiffServ policy to use in accordance with the
wsNetworkClientQosDiffservPolicyDownType as follows:
none(1) - This object is not used and must not be set… | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.8 |
| wsNetworkClientQosDiffservPolicyUpType DiffServ policy type used for the wireless up (inbound) direction from
client to AP for this network. Setting this object usually requires
that the wsNetworkClientQosDiffservPoli… | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.9 |