wsNetworkClientQosAccessControlUpName
AT-UWC-WLAN-SWITCH-MIB ·
.1.3.6.1.4.1.207.8.42.8.34.3.9.1.6
Object
column
OctetString
Name of the access list to use in accordance with the
wsNetworkClientQosAccessControlUpType as follows:
none(1) - This object is not used and must not be set.
ip(2) - This specifies an IP access list number in the range
1-199, entered as a character string rather than an integer,
or an alphanumeric string from 1-31 characters, beginning
with a letter. This must be a valid IP access list,
as defined by the aclTable in the FASTPATH-QOS-ACL-MIB.
mac(3) - This is an alphanumeric string from 1-31 characters, beginning
with a letter. This must be a valid MAC access list name,
as defined by the aclMacName object in the FASTPATH-QOS-ACL-MIB.
ipv6(4) - This is an alphanumeric string from 1-31 characters, beginning
with a letter. This must be a valid IPV6 access list name,
as defined by the aclIpv6Name object in the FASTPATH-QOS-ACL-MIB.
Note that numbered IP access lists are specified here using a character
string notation instead of an integer value.
Object set restrictions:
------------------------
1. When setting wsNetworkClientQosAccessControlUpType to none(0), this object
must not be set.
2. When setting wsNetworkClientQosAccessControlUpType to any value other than
none(0), both the wsNetworkClientQosAccessControlUpType and this object
must be set at the same time (i.e. use multiple variable bindings).
3. This object may be set by itself in accordance with the existing
wsNetworkClientQosAccessControlUpType value, provided the type value
is anything other than none(0).
Context
- MIB
- AT-UWC-WLAN-SWITCH-MIB
- OID
.1.3.6.1.4.1.207.8.42.8.34.3.9.1.6- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- wsNetworkClientQosEntry
- Table
- wsNetworkClientQosTable
- Siblings
- 10
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-31
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wsNetworkClientQosBandwidthLimitDown Maximum bandwidth rate allowed for the wireless down (outbound)
direction from AP to client for this network, thus controlling
the maximum receive rate from the AP for a wireless … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.1 |
| wsNetworkClientQosDiffservPolicyUpName Name of the DiffServ policy to use in accordance with the
wsNetworkClientQosDiffservPolicyUpType as follows:
none(1) - This object is not used and must not be set.
… | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.10 |
| wsNetworkClientQosMode Flag to enable/disable AP quality-of-service for wireless clients
on this network. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.11 |
| wsNetworkClientQosBandwidthLimitUp Maximum bandwidth rate allowed for the wireless up (inbound)
direction from client to AP for this network, thus controlling
the maximum send rate to the AP for a wireless client. … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.2 |
| wsNetworkClientQosAccessControlDownType Access list type used for the wireless down (outbound) direction from
AP to client for this network. Setting this object usually requires
that the wsNetworkClientQosAccessControl… | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.3 |
| wsNetworkClientQosAccessControlDownName Name of the access list to use in accordance with the
wsNetworkClientQosAccessControlDownType as follows:
none(1) - This object is not used and must not be set.
… | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.4 |
| wsNetworkClientQosAccessControlUpType Access list type used for the wireless up (inbound) direction from
client to AP for this network. Setting this object usually requires
that the wsNetworkClientQosAccessControlUpN… | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.5 |
| wsNetworkClientQosDiffservPolicyDownType DiffServ policy type used for the wireless down (outbound) direction from
AP to client for this network. Setting this object usually requires
that the wsNetworkClientQosDiffservP… | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.7 |
| wsNetworkClientQosDiffservPolicyDownName Name of the DiffServ policy to use in accordance with the
wsNetworkClientQosDiffservPolicyDownType as follows:
none(1) - This object is not used and must not be set… | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.8 |
| wsNetworkClientQosDiffservPolicyUpType DiffServ policy type used for the wireless up (inbound) direction from
client to AP for this network. Setting this object usually requires
that the wsNetworkClientQosDiffservPoli… | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.3.9.1.9 |