wsIfNumber

AT-UWC-WLAN-SWITCH-MIB · .1.3.6.1.4.1.207.8.42.8.34.3.8.1.36
MIB view Table view

Object

column SNMPv2-SMIInteger32 
A unique value to identify the wireless network interface.

Context

MIB
AT-UWC-WLAN-SWITCH-MIB
OID
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.36
Type
column
Access
readonly
Status
current
Parent
wsNetworkEntry
Table
wsNetworkTable
Siblings
37

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wsNetworkId
Network Id used to uniquely identify the network.
columnInteger32.1.3.6.1.4.1.207.8.42.8.34.3.8.1.1
wsNetworkMACAuthenticationMode
This object indicates mode to disable, or enable and specify lookup method for authentication via client MAC address.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.10
wsNetworkRadiusAccountingMode
Flag to enable/disable RADIUS accounting authentication for users on this network.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.14
wsNetworkSecurityMode
Specifies authentication and encryption mode on this network.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.15
wsNetworkWPAVersionsSupported
If Wi-Fi Protected Access(WPA) encryption mode is enabled, this object indicates the versions of WPA allowed by clients on this network.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.16
wsNetworkWPACipherSuites
If WPA encryption mode is enabled, this object indicates which encryption solutions to use for WPA clients.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.17
wsNetworkWPAKeyType
If WPA-SharedKey security mode is enabled, this object specifies the type of the WPA key configured. Only ascii key type is supported for this release.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.18
wsNetworkWPAKey
If WPA-SharedKey security mode is enabled, this object specifies the pre-shared secret for WPA clients. For ASCII - 8-63 characters.
columnOctetString.1.3.6.1.4.1.207.8.42.8.34.3.8.1.19
wsNetworkIdRowStatus
Add Network ID to the network configuration table. The first 16 network configurations are created by default, they are applied to VAP-0 through VAP-15 in order on each radio when…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.207.8.42.8.34.3.8.1.2
wsNetworkWPA2PreAuthenticationMode
If WPA2 encryption is enabled, flag to enable/disable pre-authentication support for roaming WPA2 clients.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.20
wsNetworkWPA2PreAuthenticationLimit
If WPA2 pre-authentication is enabled, this object specifies a limit on the number of APs within the peer group to which one client is allowed to be pre-authenticate.
columnInteger32.1.3.6.1.4.1.207.8.42.8.34.3.8.1.21
wsNetworkWPA2RoambackKeyCacheHoldtime
Length of time in minutes a PMK will be cached by an AP after the client using this PMK has roamed away from this AP. Length of time a PMK will be cached by an AP after the PMK ha…
columnInteger32.1.3.6.1.4.1.207.8.42.8.34.3.8.1.23
wsNetworkStaticWEPAuthenticationMode
Indicates security configuration for static WEP.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.24
wsNetworkUseWEPTransferKeyIndex
If wsNetSecurityMode is wepSharedKey, this object indicates which Wired Equivalent Privacy(WEP) algorithm network will use for encryption.
columnInteger32.1.3.6.1.4.1.207.8.42.8.34.3.8.1.25
wsNetworkWEPKeyType
If WEP-SharedKey security mode is enabled, this object specifies the type WEP key configured.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.26
wsNetworkWEPKeyLength
If WEP-SharedKey security mode is enabled, this object specifies number of bits for the WEP key.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.27
wsNetworkWEPKey1
If WEP-SharedKey security mode is enabled, this object specifies the key for WEP clients. Minimum characters required for key based on key type/length are: For ASCII/64 - 5 ch…
columnOctetString.1.3.6.1.4.1.207.8.42.8.34.3.8.1.28
wsNetworkWEPKey2
If WEP-SharedKey security mode is enabled, this object specifies the key for WEP clients. Minimum characters required for key based on key type/length are: For ASCII/64 - 5 ch…
columnOctetString.1.3.6.1.4.1.207.8.42.8.34.3.8.1.29
wsNetworkSSID
This object indicates Service Set ID specific to this Network. The first network is configured with a default SSID 'Guest Network', the rest of the networks have default SSIDs ass…
columnOctetString.1.3.6.1.4.1.207.8.42.8.34.3.8.1.3
wsNetworkWEPKey3
If WEP-SharedKey security mode is enabled, specifies the key for WEP clients. Minimum characters required for key based on key type/length are: For ASCII/64 - 5 characters …
columnOctetString.1.3.6.1.4.1.207.8.42.8.34.3.8.1.30
wsNetworkWEPKey4
If WEP-SharedKey security mode is enabled, this object specifies the key for WEP clients. Minimum characters required for key based on key type/length are: For ASCII/64 - 5 ch…
columnOctetString.1.3.6.1.4.1.207.8.42.8.34.3.8.1.31
wsClearNetworkEntry
This is an action object. Setting this object to enable will set Network Id configuration to default configuration. Read on this object will always return disable.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.33
wsNetworkRedirectMode deprecated
Specifies the redirect mode on this network.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.34
wsNetworkRedirectURL deprecated
This object indicates HTTP Redirect URL on the Network Id.
columnOctetString.1.3.6.1.4.1.207.8.42.8.34.3.8.1.35
wsNetworkAuthRadiusServerName
The name of the RADIUS server used for client authentications.
columnOctetString.1.3.6.1.4.1.207.8.42.8.34.3.8.1.37
wsNetworkAuthRadiusServerConfiguredStatus
Indicates whether the specified named RADIUS Authentication server is configured in the RADIUS Client configuration.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.38
wsNetworkAcctRadiusServerName
The name of the RADIUS server used for reporting wireless client associations and disassociations.
columnOctetString.1.3.6.1.4.1.207.8.42.8.34.3.8.1.39
wsNetworkDefaultVLANId
Default VLAN Id assigned to the Network. The default VLAN is used if RADIUS based authentication is not configured for the network or the RADIUS server does not return a VLAN for …
columnInteger32.1.3.6.1.4.1.207.8.42.8.34.3.8.1.4
wsNetworkAcctRadiusServerConfiguredStatus
Indicates whether the specified named RADIUS Accounting server is configured in the RADIUS Client configuration.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.40
wsUseNetworkRadiusConfig
This flag controls whether the VAP uses the network RADIUS configuration or global RADIUS configuration. When enabled, network RADIUS configuration shall be used.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.41
wsNetworkDistTunnelMode
Flag to enable/disable Distributed Tunneling for this Network.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.42
wsNetworkBcastKeyRefreshRate
The 802.1x broadcastkey refresh rate command specifies the interval after which the broadcast keys are changed.
columnUnsigned32.1.3.6.1.4.1.207.8.42.8.34.3.8.1.43
wsNetworkSessionKeyRefreshRate
The 802.1x SessionKey refresh rate command specifies the interval after which the Unicast session keys are changed. This is applicable only dynamic WEP and WPA Enterprise modes.Va…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.3.8.1.44
wsNetworkARPSuppressionMode
Flag to enable/disable Wireless ARP Suppression for this Network.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.45
wsNetworkBandSteerMode
Configure band steering on this VAP. To have band steering operationally enabled, the following conditions should be met: 1. SSIDs on both VAPs should match. 2. One radio should…
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.46
wsNetworkHideSSIDMode
Flag to enable/disable inclusion of SSID in AP beacons.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.5
wsNetworkDenyBcastMode
If client broadcasts probe requests to all available SSIDs this option controls whether or not the system will respond to the probe request. The 'disable' mode means that the syst…
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.3.8.1.6