wsGlobalPeerConfigReceived

AT-UWC-WLAN-SWITCH-MIB · .1.3.6.1.4.1.207.8.42.8.34.1.12.24
MIB view Table view

Object

scalar Bits 
Indicates which portions of configuration were last received from a
peer controller.

Context

MIB
AT-UWC-WLAN-SWITCH-MIB
OID
.1.3.6.1.4.1.207.8.42.8.34.1.12.24
Type
scalar
Access
readonly
Status
current
Parent
wsGlobalStatus
Siblings
39

Syntax

Bits

Values & Constraints

Enumerated Values
1none
2globalConfig
3discoveryConfig
4validAPDatabase
5channelPowerConfig
6profileNetworkConfig
7knownClientConfig
8captivePortalConfig
9radiusClientConfig
10qosAclConfig
11qosDiffServConfig
12wdsGroupConfig
13deviceLocationConfig

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wsIPAddress
This object represents wireless controller IP address. When wireless mode is in disabled state, the value of controller IP address is zero.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.207.8.42.8.34.1.12.1
wsTotalRogueAPs
Total number of Rogue APs detected on the WLAN.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.10
wsTotalUnknownAPs
Total number of Unknown APs detected on the WLAN.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.11
wsMaximumManagedAPsInPeerGroup
Maximum number of APs that can be managed by the wireless controller when it acts as Cluster Controller.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.12
wsTotalClients
Total number of clients present in the network.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.13
wsTotalAuthenticatedClients
Total number of authenticated clients across all APs managed by the controller.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.14
wsMaximumAssociatedClients
Maximum number of clients that can associate with the wireless system.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.15
wsWLANUtilization
Total network utilization across all APs managed by this controller. This is based on global statistics.
scalarInteger32.1.3.6.1.4.1.207.8.42.8.34.1.12.16
wsGlobalStatusRegulatoryDomainFor2GHz
Regulatory domain for 2GHz frequency channels.
scalarOctetString.1.3.6.1.4.1.207.8.42.8.34.1.12.18
wsGlobalStatusRegulatoryDomainFor5GHz
Regulatory domain for 5GHz frequency channels.
scalarOctetString.1.3.6.1.4.1.207.8.42.8.34.1.12.19
wsOperationalStatus
Indicates the current operating status of the wireless system.
scalarEnumeration.1.3.6.1.4.1.207.8.42.8.34.1.12.2
wsGlobalPeerConfigRequestAction
This action object is used to: - start - Start the config push into all the peer controllers in the peer group. - Read on this object will always return none.
scalarEnumeration.1.3.6.1.4.1.207.8.42.8.34.1.12.20
wsGlobalPeerConfigRequestStatus
The global status for the configuration push operation to one or more peer controllers.
scalarEnumeration.1.3.6.1.4.1.207.8.42.8.34.1.12.21
wsGlobalPeerConfigReceiveStatus
The global status when wireless configuration is received from a peer controller.
scalarEnumeration.1.3.6.1.4.1.207.8.42.8.34.1.12.22
wsGlobalPeerConfigSwitchIp
IP Address of the last controller from which this controller received any wireless configuration data.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.207.8.42.8.34.1.12.23
wsGlobalPeerConfigReceivedTimestamp
The last time this controller received any configuration data from a peer controller.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.207.8.42.8.34.1.12.25
wsClusterControllerIndicator
Indicates if the controller is currently the Cluster Controller of the peer group or not.
scalarEnumeration.1.3.6.1.4.1.207.8.42.8.34.1.12.26
wsClusterController
This object represents Cluster Controller's IP address.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.207.8.42.8.34.1.12.27
wsRogueAPMitigationCount
Number of APs to which the wireless system is currently sending de-authentication messages to mitigate against rogue APs.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.28
wsRogueAPMitigationLimit
Maximum number of APs for which the system can send de-authentication frames.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.29
wsOperationalStatusDisableReason
This object indicates the reason of operational status to be disabled. Values 5 and 6 are applicable only if routing functionality present.
scalarEnumeration.1.3.6.1.4.1.207.8.42.8.34.1.12.3
wsRogueAPAcknowledgeAll
This is a command that allows the administrator to clear out all rogue AP states in the RF Scan database
scalarEnumeration.1.3.6.1.4.1.207.8.42.8.34.1.12.30
wsTotalDetectedClients
Total number of detected clients across all APs managed by the controller.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.31
wsMaximumDetectedClients
Maximum number of clients that can be maintained by the detected clients database.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.32
wsMaximumDetectedClientPreAuthenticationHistoryEntries
Maximum number of pre-authentication history entries that can be recorded for all the detected clients present in the detected client database.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.33
wsTotalDetectedClientPreAuthenticationHistoryEntries
Total number of pre-authentication history entries accumulated for all the detected clients present in the detected client database.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.34
wsMaximumDetectedClientRoamHistoryEntries
Maximum number of roam history entries that can be recorded for all the detected clients present in the detected client database.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.35
wsTotalDetectedClientRoamHistoryEntries
Total number of roam history entries accumulated for all the detected clients present in the detected client database.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.36
wsRegenerateX509CertificateAction
This action object is used to: - start - Start the certificate regeneration on the controller. - Read on this object will always return none.
scalarEnumeration.1.3.6.1.4.1.207.8.42.8.34.1.12.37
wsRegenerateX509CertificateStatus
Status of regenerate X.509 certificates.
scalarEnumeration.1.3.6.1.4.1.207.8.42.8.34.1.12.38
wsNetworkMutualAuthenticationStatus
Status of the mutual authentication enable/disable command. When status is Complete With Errors then the administrator may need to provision some controllers or APs separately.
scalarEnumeration.1.3.6.1.4.1.207.8.42.8.34.1.12.39
wsTotalPeerSwitches
Total number of peer controllers detected on the network.
scalarInteger32.1.3.6.1.4.1.207.8.42.8.34.1.12.4
wsTotalProvisioningAPs
Total number of APs present in the AP Provisioning database.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.40
wsMaximumProvisioningAPs
Maximum number of APs that can be maintained in the AP Provisioning database.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.41
wsTotalAPs
Sum of all the WS managed APs, connection failed APs, and discovered APs in the database.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.5
wsTotalManagedAPs
Total number of WS managed APs currently authenticated to the controller.
scalarInteger32.1.3.6.1.4.1.207.8.42.8.34.1.12.6
wsTotalStandaloneAPs
Total number of trusted AP's in the standalone mode.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.7
wsTotalDiscoveredAPs
Number of APs that are connected to the controller, but are not completely configured.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.8
wsTotalConnectionFailedAPs
Number of APs that were previously authenticated and managed, but currently do not have connection with the controller.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.207.8.42.8.34.1.12.9