wsClusterPriority
AT-UWC-WLAN-SWITCH-MIB ·
.1.3.6.1.4.1.207.8.42.8.34.1.16
Object
scalar
Unsigned32
Preference level of the controller to become the Cluster Controller of the Peer Group.A priority of 0 means that the controller can not become cluster controller.
Context
- MIB
- AT-UWC-WLAN-SWITCH-MIB
- OID
.1.3.6.1.4.1.207.8.42.8.34.1.16- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- wsGlobalConfig
- Siblings
- 37
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wsMode Flag to enable/disable wireless controller functionality
on the device. Disable will purge all status and statistics
related to wireless functionality. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.1 |
| wsDetectedClientAgeTime Time in hours to wait before deleting an entry
from the detected clients database.A value of 0 in input range means that the entry never ages out. | scalar | Unsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.10 |
| wsValidAPConfigTable This table contains configurable parameters for a specific AP.
When an AP is discovered and the wsValidationMethod is local,
its MAC address is verified in this table to determine… | table | - | .1.3.6.1.4.1.207.8.42.8.34.1.11 |
| wsGlobalStatus | node | - | .1.3.6.1.4.1.207.8.42.8.34.1.12 |
| wsGlobalStatistics | node | - | .1.3.6.1.4.1.207.8.42.8.34.1.13 |
| wsPeerConfiguration | node | - | .1.3.6.1.4.1.207.8.42.8.34.1.14 |
| wsAPClientQosMode Flag to globally enable/disable AP quality-of-service
operation for wireless clients. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.17 |
| wsAPAutoUpgradeMode Flag to enable/disable AP auto upgrade mode. This object is
configurable only if the wireless controller supports both
'Integrated' and 'Independent' AP image download modes.
If t… | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.18 |
| wsDistTunnelIdleTimeout Time of inactivity in seconds to wait before terminating a
tunnel client. | scalar | Unsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.19 |
| wsCountryCode This object indicates country of operation for WLAN. Supported
country codes are:
Australia - AU, Austria - AT, Austria - AT,
Belgium - BE, Brazil - BR, Canada - CA,
China - C… | scalar | OctetString | .1.3.6.1.4.1.207.8.42.8.34.1.2 |
| wsDistTunnelMaxTimeout Time in seconds to wait before terminating a tunnel client. | scalar | Unsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.20 |
| wsDistTunnelMaxMcastRepl Maximum number of multicast replications that can be performed
by the AP. | scalar | Unsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.21 |
| wsDistTunnelMaxClients Maximum number of clients that can use tunneled through a
Home AP. | scalar | Unsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.22 |
| wsMACAuthenticationMode This object indicates whether MAC addresses in the Known Client
database are granted or denied access if they are in the list,
but dont have a specific action. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.23 |
| wsKnownClientTable This table contains entries of the known clients. | table | - | .1.3.6.1.4.1.207.8.42.8.34.1.24 |
| wsWidsSecurity | node | - | .1.3.6.1.4.1.207.8.42.8.34.1.25 |
| wsGlobalRadiusConfiguration | node | - | .1.3.6.1.4.1.207.8.42.8.34.1.26 |
| wsSwitchStatusTable This table contain access point and client status parameters
of peer controllers of wireless controller. | table | - | .1.3.6.1.4.1.207.8.42.8.34.1.27 |
| wsSwitchStatisticsTable This table contain WLAN statistics for every controller in the
peer group. Only Cluster Controller can hold the entries for peer
controllers. The controller which is not a Cluster… | table | - | .1.3.6.1.4.1.207.8.42.8.34.1.28 |
| wsAutoIPAssignMode Flag indicating whether the Wireless feature should
automatically assign an IP address from one of the active
interfaces or whether the IP address is manually assigned. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.29 |
| wsPeerGroupId This object indicates which peer group this controller belongs to, there
may be more than one group of peer controllers in the WLAN. | scalar | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.1.3 |
| wsSwitchStaticIPAddress Statically assigned IPv4 address for the Wireless feature.
If Auto IP Assignment is true then this setting is ignored. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.207.8.42.8.34.1.30 |
| wsGlobalTspecConfiguration | node | - | .1.3.6.1.4.1.207.8.42.8.34.1.31 |
| networkMutualAuthMode Flag to enable/disable mutual authentication of the Wireless
controllers and Access Points in the network. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.32 |
| unmanagedAPReprovisioning Flag to enable/disable reprovisioning of APs when in unmanaged mode. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.33 |
| apProvisionDbAgeTime Time in hours to wait without hearing any updates for the APs before
removing them from the provisioning database.A value of 0 in input range means that the entry never ages out. | scalar | Unsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.34 |
| switchProvisioning Flag to enable/disable controller provisioning. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.35 |
| wsIpBasePort Base IP port. | scalar | Unsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.36 |
| devLocMeasurementSys Measurement system in english/metric. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.37 |
| devLocRfScanLocMode Flag to enable/disable RF Scan location Mode. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.38 |
| devLocRfScanLocInterval Number of seconds between iterations of triangulation
table device location protocol. | scalar | Unsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.39 |
| wsAPValidationMethod This object indicates whether or not to verify newly discovered APs
and look up their configuration against the local database
or a RADIUS server. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.4 |
| wsAPAuthenticationMode Flag to indicate if authentication is required for an AP to
establish communication with the controller. | scalar | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.5 |
| wsClientRoamAgeTime Time in seconds to wait after a client disassociates from a
managed AP before deleting the client association
database entry. | scalar | Unsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.6 |
| wsRFScanAgeTime Time in hours to wait before deleting an entry
obtained from an RF scan.A value of 0 in input range means that the entry never ages out. | scalar | Unsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.7 |
| wsAPFailureAgeTime Time in hours to wait before deleting an entry in
the AP association and authentication failure list.
A value of 0 in input range means that the entry never ages out. | scalar | Unsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.8 |
| wsAdHocClientAgeTime Time in hours to wait before deleting an entry in
Ad hoc client list.A value of 0 in input range means that the entry never ages out. | scalar | Unsigned32 | .1.3.6.1.4.1.207.8.42.8.34.1.9 |