wsChannelPlanMode
AT-UWC-WLAN-SWITCH-MIB ·
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.2
Object
column
Enumeration
Indicates mode of computing and applying channel adjustments for managed AP radios operating in 2.4Ghz and 5Ghz band.
Context
- MIB
- AT-UWC-WLAN-SWITCH-MIB
- OID
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wsChannelPlanEntry
- Table
- wsChannelPlanTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | manual |
2 | interval |
3 | time |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wsChannelPlan This object indicates the whether the channel plan
is for ieee802dot11bORgn or ieee802dot11an. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.1 |
| wsChannelPlanLastAlgorithmTime The time since the last channel plan algorithm ran. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.10 |
| wsChannelPlanChangeThreshold The minimum signal strength (dBm) with which a neighbor must be detected
on the current operational channel in order for the channel plan to consider
moving away from the current … | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.11 |
| wsChannelPlanIgnoreUnamangedAPs When enabled, the channel plan does not take into account the interfering unmanaged APs.
Only managed APs are used for generating the channel plan. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.12 |
| wsChannelPlanNumOfRadios Number of radios operating in the band.
This includes the radios with static channel assignment. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.13 |
| wsChannelPlanNumOfRadiosAnalysed Indicates the number of AP radios analyzed by the channel algorithm.
This includes APs that operate on static channels.This value is reset at
the start of each channel plan cycle. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.14 |
| wsChannelPlanNumOfRadiosScanned Indicates the number of AP radios for which a Channel Plan Request
has been sent by the channel algorithm.This value is reset at
the start of each channel plan cycle. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.15 |
| wsChannelPlanNumOfRadiosChanged Indicates the number of AP radios whose operating channel changed.
This includes APs whose channel is changed to the same channel as
the original operating channel.This value is r… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.16 |
| wsChannelPlanNumOfRadiosChangedToOrigChannel Indicates the number of AP radios that scanned the candidate channels but
ended on the same channel.This value is reset at
the start of each channel plan cycle. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.17 |
| wsChannelPlanEstimatedTimeOfCompletion The time for the estimated time of completion of the current channel plan cycle.
When the channel plan is inactive the time stamp is zeroed out. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.18 |
| wsChannelPlanPercentageComplete During the channel plan cycle this parameter is the percentage of the
AP radios that have been analyzed. When the channel plan is inactive this value is 0. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.19 |
| wsChannelPlanChangeThresholdAdj The number of dBm by which to reduce the Channel Change Threshold for detected managed APs based on the Transmit Power of the detected managed APs. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.20 |
| wsChannelPlanManagedAPFailureInterval The number of seconds to wait before triggering the channel plan after a managed AP fails. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.21 |
| wsChannelPlanRunOnManagedApFailure When this administrative parameter is enabled, the controller runs ACA algorithm after it detects that a managed AP failed. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.22 |
| wsChannelPlanInterval If channel plan mode is interval, this object indicates
a regular interval in minutes at which to compute and apply a new
channel adjustments. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.3 |
| wsChannelPlanTime If channel plan mode is time, this object indicates the next
scheduled time in minutes at which to compute and apply a
new channel adjustments. Zero minutes stands for mid-night. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.4 |
| wsChannelPlanHistoryDepth obsolete Indicates the maximum number of previously applied channel
algorithm iterations stored on the controller and used in the
next channel adjustment computation. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.5 |
| wsChannelPlanOperatingStatus Indicates whether or not automatic channel adjustment
is operating for managed AP radios operating in
2.4Ghz and 5Ghz band. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.6 |
| wsChannelPlanLastIterationStatus obsolete Indicates the current iteration of channel plan
adjustments for managed AP radio. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.7 |
| wsChannelPlanManualAction This action object is used to:
- Run the Proposed Channel Adjustment alogorithm
- Abort the channel plan.
- Clear the calculated 2.4Ghz and 5Ghz channel plan.
Read on this object … | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.8 |
| wsChannelPlanManualStatus obsolete Indicates the current state of a manual request
to compute or apply proposed channel adjustments. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.5.1.1.9 |