wsAuthenticatedClientTxDataRate

AT-UWC-WLAN-SWITCH-MIB · .1.3.6.1.4.1.207.8.42.8.34.21.1.1.7
MIB view Table view

Object

column Integer32 
Indicates the data rate, AP will actually support
in setting up communications with client stations
represented by a count from 2 - 1200, corresponding
to data rates in multiples of 500 kbit/s from 1 Mbit/s
to 600 Mbit/s.
Supported Data Rate          Mbps
    2                          1
    4                          2
    11                         5.5
    12                         6
    18                         9 and so on.

Context

MIB
AT-UWC-WLAN-SWITCH-MIB
OID
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.7
Type
column
Access
readonly
Status
current
Parent
wsAuthenticatedClientStatusEntry
Table
wsAuthenticatedClientStatusTable
Siblings
32

Syntax

Integer32

Values & Constraints

Object Constraints
range: 2-1200

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wsAuthenticatedClientMacAddress
Authenticated client MAC address.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.207.8.42.8.34.21.1.1.1
wsAuthenticatedClientAge
Indicates time since the controller has received new data for this client.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.207.8.42.8.34.21.1.1.10
wsAuthenticatedClientAssociatingSwitch
This object indicates whether the client is associated to an AP managed by this controller or peer-controller.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.21.1.1.11
wsAuthenticatedClientSwitchMacAddress
MAC address of the WS associating the client.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.207.8.42.8.34.21.1.1.12
wsAuthenticatedClientSwitchIpAddress
IP address of the WS associating the client.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.207.8.42.8.34.21.1.1.13
wsAuthenticatedClientDot11nCapable
Flag indicating whether this client is capable of 802.11n operation.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.21.1.1.14
wsAuthenticatedClientStbcCapable
Flag indicating whether this client is capable of Space Time Block Code (STBC) operation.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.21.1.1.15
wsAuthenticatedClientDistTunnelStatus
Indicates whether L2 Distributed Tunneling is Enabled or Disabled
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.21.1.1.16
wsAuthenticatedClientDistTunnelRoamStatus
Indicates whether the client is using the distrubuted tunnel or not. Also indicates if it is a roamed client or not.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.21.1.1.17
wsAuthenticatedClientDistTunnelHomeAPMac
Indicates MAC Address of the client's Home AP. Here the client should be associated with the network on which the L2 Distributed Tunneling is enabled.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.207.8.42.8.34.21.1.1.18
wsAuthenticatedClientDistTunnelAssocAPMac
MAC Address of the client's Association AP to which the client has roamed to.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.207.8.42.8.34.21.1.1.19
wsAuthenticatedClientTunnelIpAddress
Indicates network IP address of the client station, 0.0.0.0 indicates unknown. Tunnel IP subnet is present only for clients authenticated with tunneled VAPs.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.207.8.42.8.34.21.1.1.2
wsAuthenticatedClientAPMacAddress
MAC Address of the AP to which client is Authenticated.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.207.8.42.8.34.21.1.1.20
wsAuthenticatedClientBSSID
BSSID of the VAP to which client is associated.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.207.8.42.8.34.21.1.1.21
wsAuthenticatedClientRadioInterface
Indicates the radio interface on which client is associated.
columnInteger32.1.3.6.1.4.1.207.8.42.8.34.21.1.1.22
wsAuthenticatedClientChannel
Indicates channel for associated client entry.
columnInteger32.1.3.6.1.4.1.207.8.42.8.34.21.1.1.23
wsAuthenticatedClientNwTime
Indicates time since this client first authenticated with the network.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.207.8.42.8.34.21.1.1.24
wsAuthenticatedClientIpAddress
Indicates network IPv4 address of the client station detetecd through ARP snooping, 0.0.0.0 indicates unknown.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.207.8.42.8.34.21.1.1.25
wsAuthenticatedClientNetBiosName
NetBios Name of the client.
columnOctetString.1.3.6.1.4.1.207.8.42.8.34.21.1.1.26
wsAuthenticatedClientRRMSupported
Indicates if the Radio Resource Management (RRM) portion of the IEEE 802.11k standard is supported by client and RRM is enabled is on the AP Profile. Value 2 indicates the client …
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.21.1.1.27
wsAuthenticatedClientRRMLocationReportSupported
Indicates if the client can support RRM location report requests.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.21.1.1.28
wsAuthenticatedClientRRMBeaconTableMeasurementSupported
Indicates if the client can detect APs via RRM beacon table reports.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.21.1.1.29
wsAuthenticatedClientUserName
Indicates user name of the client that have authenticated via 802.1x, clients on networks with other security modes will not have a user name.
columnOctetString.1.3.6.1.4.1.207.8.42.8.34.21.1.1.3
wsAuthenticatedClientRRMBeaconActiveMeasurementSupported
Indicates if the client supports active scan capability.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.21.1.1.30
wsAuthenticatedClientRRMBeaconPassiveMeasurementSupported
Indicates if the client supports passive scan capability.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.21.1.1.31
wsAuthenticatedClientRRMChannelLoadMeasurementSupported
Indicates if the client supports RRM channel load measurement.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.21.1.1.32
wsAuthenticatedClientDot11acCapable
Flag indicating whether this client is capable of 802.11ac operation.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.21.1.1.33
wsAuthenticatedClientSSID
Indicates the network on which the client is connected.
columnOctetString.1.3.6.1.4.1.207.8.42.8.34.21.1.1.4
wsAuthenticatedClientVLAN
If client is on VAP using VLAN data forwarding mode, indicates current assigned VLAN.
columnInteger32.1.3.6.1.4.1.207.8.42.8.34.21.1.1.5
wsAuthenticatedClientStatus
This object indicates client's status.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.21.1.1.6
wsAuthenticatedClientInactivePeriod
For a current association, period of time that the AP has not seen any traffic for the client.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.207.8.42.8.34.21.1.1.8
wsAuthenticatedClientDisassociateAction
This is an action object. Setting this object to start will initiate the disassociation of associated client. Read on this object will always return none.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.21.1.1.9