wsAssociatedClientVLAN

AT-UWC-WLAN-SWITCH-MIB · .1.3.6.1.4.1.207.8.42.8.34.7.1.1.5
MIB view Table view

Object

column obsolete Integer32 
If client is on VAP using VLAN data forwarding mode,
indicates obsolete assigned VLAN.

Context

MIB
AT-UWC-WLAN-SWITCH-MIB
OID
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.5
Type
column
Access
readonly
Status
obsolete
Parent
wsAssociatedClientStatusEntry
Table
wsAssociatedClientStatusTable
Siblings
31

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-4094

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wsAssociatedClientMacAddress obsolete
Associated client MAC address.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.207.8.42.8.34.7.1.1.1
wsAssociatedClientAge obsolete
Indicates time since the controller has received new data for this client.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.207.8.42.8.34.7.1.1.10
wsAssociatedClientAssociatingSwitch obsolete
This object indicates whether the client is associated to an AP managed by this controller or peer-controller.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.7.1.1.11
wsAssociatedClientSwitchMacAddress obsolete
MAC address of the WS associating the client.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.207.8.42.8.34.7.1.1.12
wsAssociatedClientSwitchIpAddress obsolete
IP address of the WS associating the client.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.207.8.42.8.34.7.1.1.13
wsAssociatedClientDot11nCapable obsolete
Flag indicating whether this client is capable of 802.11n operation.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.7.1.1.14
wsAssociatedClientStbcCapable obsolete
Flag indicating whether this client is capable of Space Time Block Code (STBC) operation.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.7.1.1.15
wsAssociatedClientDistTunnelStatus obsolete
Indicates whether L2 Distributed Tunneling is Enabled or Disabled
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.7.1.1.16
wsAssociatedClientDistTunnelRoamStatus obsolete
Indicates whether the client is using the distrubuted tunnel or not. Also indicates if it is a roamed client or not.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.7.1.1.17
wsAssociatedClientDistTunnelHomeAPMac obsolete
Indicates MAC Address of the client's Home AP. Here the client should be associated with the network on which the L2 Distributed Tunneling is enabled.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.207.8.42.8.34.7.1.1.18
wsAssociatedClientDistTunnelAssocAPMac obsolete
MAC Address of the client's Association AP to which the client has roamed to.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.207.8.42.8.34.7.1.1.19
wsAssociatedClientTunnelIpAddress obsolete
Indicates network IP address of the client station, 0.0.0.0 indicates unknown. Tunnel IP subnet is present only for clients authenticated with tunneled VAPs.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.207.8.42.8.34.7.1.1.2
wsAssociatedClientAPMacAddress obsolete
MAC Address of the AP to which client is Associated.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.207.8.42.8.34.7.1.1.20
wsAssociatedClientBSSID obsolete
BSSID of the VAP to which client is associated.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.207.8.42.8.34.7.1.1.21
wsAssociatedClientRadioInterface obsolete
Indicates the radio interface on which client is associated.
columnInteger32.1.3.6.1.4.1.207.8.42.8.34.7.1.1.22
wsAssociatedClientChannel obsolete
Indicates channel for associated client entry.
columnInteger32.1.3.6.1.4.1.207.8.42.8.34.7.1.1.23
wsAssociatedClientNwTime obsolete
Indicates time since this client first authenticated with the network.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.207.8.42.8.34.7.1.1.24
wsAssociatedClientIpAddress obsolete
Indicates network IPv4 address of the client station detetecd through ARP snooping, 0.0.0.0 indicates unknown.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.207.8.42.8.34.7.1.1.25
wsAssociatedClientNetBiosName obsolete
NetBios Name of the client.
columnOctetString.1.3.6.1.4.1.207.8.42.8.34.7.1.1.26
wsAssociatedClientRRMSupported obsolete
Indicates if the Radio Resource Management (RRM) portion of the IEEE 802.11k standard is supported by client and RRM is enabled is on the AP Profile. Value 2 indicates the client …
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.7.1.1.27
wsAssociatedClientRRMLocationReportSupported obsolete
Indicates if the client can support RRM location report requests.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.7.1.1.28
wsAssociatedClientRRMBeaconTableMeasurementSupported obsolete
Indicates if the client can detect APs via RRM beacon table reports.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.7.1.1.29
wsAssociatedClientUserName obsolete
Indicates user name of the client that have authenticated via 802.1x, clients on networks with other security modes will not have a user name.
columnOctetString.1.3.6.1.4.1.207.8.42.8.34.7.1.1.3
wsAssociatedClientRRMBeaconActiveMeasurementSupported obsolete
Indicates if the client supports active scan capability.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.7.1.1.30
wsAssociatedClientRRMBeaconPassiveMeasurementSupported obsolete
Indicates if the client supports passive scan capability.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.7.1.1.31
wsAssociatedClientRRMChannelLoadMeasurementSupported obsolete
Indicates if the client supports RRM channel load measurement.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.7.1.1.32
wsAssociatedClientSSID obsolete
Indicates the network on which the client is connected.
columnOctetString.1.3.6.1.4.1.207.8.42.8.34.7.1.1.4
wsAssociatedClientStatus obsolete
This object indicates client's status.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.7.1.1.6
wsAssociatedClientTxDataRate obsolete
Indicates the data rate, AP will actually support in setting up communications with client stations represented by a count from 2 - 1200, corresponding to data rates in multiples …
columnInteger32.1.3.6.1.4.1.207.8.42.8.34.7.1.1.7
wsAssociatedClientInactivePeriod obsolete
For a current association, period of time that the AP has not seen any traffic for the client.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.207.8.42.8.34.7.1.1.8
wsAssociatedClientDisassociateAction obsolete
This is an action object. Setting this object to start will initiate the disassociation of associated client. Read on this object will always return none.
columnEnumeration.1.3.6.1.4.1.207.8.42.8.34.7.1.1.9