wsAPRadio1Channel
AT-UWC-WLAN-SWITCH-MIB ·
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.6
Object
column
Integer32
This object indicates the fixed channel for the AP radio one. Zero indicates automatic channel assignment.
Context
- MIB
- AT-UWC-WLAN-SWITCH-MIB
- OID
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wsValidAPConfigEntry
- Table
- wsValidAPConfigTable
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: 108-108
range: 165-165
range: 160-161
range: 157-157
range: 152-153
range: 149-149
range: 140-140
range: 136-136
range: 132-132
range: 128-128
range: 124-124
range: 120-120
range: 116-116
range: 112-112
range: 0-14
range: 104-104
range: 100-100
range: 64-64
range: 60-60
range: 58-58
range: 56-56
range: 52-52
range: 50-50
range: 48-48
range: 44-44
range: 42-42
range: 40-40
range: 36-36
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wsAPMacAddress MAC address of an AP. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.1 |
| wsAPStandaloneExpectedChannel This object indicates the expected channel for the AP
in standalone mode. Zero indicates that any channel is allowed. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.10 |
| wsAPStandaloneExpectedSecurity This object indicates the expected security mode for the AP
in standalone mode. Zero indicates that any security mode is allowed. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.11 |
| wsAPStandaloneExpectedSsid This object indicates the expected SSID for the AP
in standalone mode. A null string indicates that any
SSID is allowed. | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.12 |
| wsAPStandaloneExpectedWds This object indicates whether the AP is allowed to operate as a bridge.
Configurable values are:
any Either WDS or normal mode is allowed
normal - AP is not allowed to operate in… | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.13 |
| wsAPStandaloneExpectedWired This object indicates the expected wired network mode for the AP
in standalone mode. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.14 |
| wsAPConfigRowStatus This object is used to create or delete entries in the table.
The supported values are:
active(1) - indicates a valid entry
createAndGo(4) - creates a new entr… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.15 |
| wsAPLocation This object indicates description of an AP, often based on its location. | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.2 |
| wsAPMode This field indicates whether this AP is managed
by the controller, by an administrator, or is a Rogue AP. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.3 |
| wsAPAuthenticationPasswd If AP authentication is enabled, this indicates the
password for an AP to authenticate to the controller.
This must match the password configured on an AP.
When passwod is configu… | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.4 |
| wsUseAPProfileId If AP is managed by controller, this object indicates
Id of configuration profile for this AP. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.5 |
| wsAPRadio2Channel This object indicates the fixed channel for the AP
radio two. Zero indicates automatic channel
assignment. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.7 |
| wsAPRadio1TxPower This indicates the power setting of AP radio one.
Zero indicates automatic power adjustment. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.8 |
| wsAPRadio2TxPower This indicates the power setting of AP radio two.
Zero indicates automatic power adjustment. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.9 |