wsAPConfigRowStatus
AT-UWC-WLAN-SWITCH-MIB ·
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.15
Object
column
SNMPv2-TCRowStatus
This object is used to create or delete entries in the table.
The supported values are:
active(1) - indicates a valid entry
createAndGo(4) - creates a new entry in the table
destroy(6) - removes an existing entry from the table
As this table is indexed by wsAPMacAddress,
- to create an entry, specify the AP MAC address and set object value to createAndGo(4)
- to delete an entry, select the entry from the list and set object value to destroy(6)
Context
- MIB
- AT-UWC-WLAN-SWITCH-MIB
- OID
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.15- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wsValidAPConfigEntry
- Table
- wsValidAPConfigTable
- Siblings
- 14
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wsAPMacAddress MAC address of an AP. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.1 |
| wsAPStandaloneExpectedChannel This object indicates the expected channel for the AP
in standalone mode. Zero indicates that any channel is allowed. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.10 |
| wsAPStandaloneExpectedSecurity This object indicates the expected security mode for the AP
in standalone mode. Zero indicates that any security mode is allowed. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.11 |
| wsAPStandaloneExpectedSsid This object indicates the expected SSID for the AP
in standalone mode. A null string indicates that any
SSID is allowed. | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.12 |
| wsAPStandaloneExpectedWds This object indicates whether the AP is allowed to operate as a bridge.
Configurable values are:
any Either WDS or normal mode is allowed
normal - AP is not allowed to operate in… | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.13 |
| wsAPStandaloneExpectedWired This object indicates the expected wired network mode for the AP
in standalone mode. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.14 |
| wsAPLocation This object indicates description of an AP, often based on its location. | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.2 |
| wsAPMode This field indicates whether this AP is managed
by the controller, by an administrator, or is a Rogue AP. | column | Enumeration | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.3 |
| wsAPAuthenticationPasswd If AP authentication is enabled, this indicates the
password for an AP to authenticate to the controller.
This must match the password configured on an AP.
When passwod is configu… | column | OctetString | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.4 |
| wsUseAPProfileId If AP is managed by controller, this object indicates
Id of configuration profile for this AP. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.5 |
| wsAPRadio1Channel This object indicates the fixed channel for the AP
radio one. Zero indicates automatic channel
assignment. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.6 |
| wsAPRadio2Channel This object indicates the fixed channel for the AP
radio two. Zero indicates automatic channel
assignment. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.7 |
| wsAPRadio1TxPower This indicates the power setting of AP radio one.
Zero indicates automatic power adjustment. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.8 |
| wsAPRadio2TxPower This indicates the power setting of AP radio two.
Zero indicates automatic power adjustment. | column | Integer32 | .1.3.6.1.4.1.207.8.42.8.34.1.11.1.9 |