qosSwitchPolicyIndex
AT-QOS-MIB ·
.1.3.6.1.4.1.207.8.4.4.4.99.1.2.1.1
Object
column
Integer32
The index of this policy entry. Policy index numbers for CLI commands start at 0, while SNMP indexes must start at 1. This means that the policy index in this MIB variable is 1 more than the index for the same policy as entered for CLI commands.
Context
- MIB
- AT-QOS-MIB
- OID
.1.3.6.1.4.1.207.8.4.4.4.99.1.2.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- qosSwitchPolicyEntry
- Table
- qosSwitchPolicyTable
- Siblings
- 10
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-256
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qosSwitchPolicyDefaultTCPremarking Specifies the QoS action to take on traffic in the default traffic
class before metering actions are taken. If none(0) is specified,
the traffic is passed to the metering stage. I… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.99.1.2.1.10 |
| qosSwitchPolicyDefaultTCRemarking Specifies the action to take after the metering stage for traffic
in the default traffic class. The metering stage assigns a
temporary value of bandwidth class to the flow which i… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.99.1.2.1.11 |
| qosSwitchPolicyDescription An optional description for the policy, as entered via the CLI. | column | OctetString | .1.3.6.1.4.1.207.8.4.4.4.99.1.2.1.2 |
| qosSwitchPolicyDefaultTCDropBWClass3 Specifies whether traffic that exceeds the bandwidth for the
default traffic class be dropped or not. The bandwidth limit is the
combined total of the variables qosSwitchPolicyDef… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.99.1.2.1.3 |
| qosSwitchPolicyDefaultTCIgnoreBWClass Specifies whether the traffic metering stage acknowledges any
bandwidth class assigned to flows processed by the default traffic
class. If set to yes(1), previously assigned bandw… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.99.1.2.1.4 |
| qosSwitchPolicyDefaultTCMarkValue When the qosSwitchPolicyDefaultTCPremarking variable is set to
usemarkvalue(1), this variable specifies the index into the DSCP
MAP table to use for remarking. A value in the rang… | column | Integer32 | .1.3.6.1.4.1.207.8.4.4.4.99.1.2.1.5 |
| qosSwitchPolicyDefaultTCMaxBandwidth Specifies the maximum bandwidth available to the default traffic
class. Traffic under this bandwidth will be designated as bandwidth
class 2. The value 2147483647 indicates that t… | column | kbps Integer32 | .1.3.6.1.4.1.207.8.4.4.4.99.1.2.1.6 |
| qosSwitchPolicyDefaultTCMaxBurstSize Specifies the maximum bandwidth above the bandwidth specified by
qosSwitchPolicyDefaultTCMaxBandwidth before traffic is marked as
bandwidth class 3. | column | kbps Integer32 | .1.3.6.1.4.1.207.8.4.4.4.99.1.2.1.7 |
| qosSwitchPolicyDefaultTCMinBandwidth Specifies the minimum bandwidth reserved for the default traffic
class. Traffic under this bandwidth will be marked as bandwidth
class 1. The value 2147483647 indicates that there… | column | kbps Integer32 | .1.3.6.1.4.1.207.8.4.4.4.99.1.2.1.8 |
| qosSwitchPolicyDefaultTCMinBurstSize Specifies the maximum amount of data above the bandwidth specified
in the variable qosSwitchPolicyDefaultTCMinBandwidth before traffic
is marked as bandwidth class 2. | column | kbps Integer32 | .1.3.6.1.4.1.207.8.4.4.4.99.1.2.1.9 |