atLinkMonProbeType
AT-LINKMON-MIB ·
.1.3.6.1.4.1.207.8.4.4.4.606.1.1.3
Object
column
ICMP: 1, HTTP: 2 AtLinkMonType
Type of probe, ICMP PING or HTTP GET.
Context
- MIB
- AT-LINKMON-MIB
- OID
.1.3.6.1.4.1.207.8.4.4.4.606.1.1.3- Type
- column
- Access
- readonly
- Status
- current
- Units
- ICMP: 1, HTTP: 2
- Parent
- atLinkMonProbeEntry
- Table
- atLinkMonProbeTable
- Siblings
- 13
Syntax
ICMP: 1, HTTP: 2 AtLinkMonType
- Source
- AtLinkMonType
- Base type
Enumeration
Values & Constraints
Type Values
1 | icmp |
2 | http |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atLinkMonProbeID ID of the probe. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.207.8.4.4.4.606.1.1.1 |
| atLinkMonProbeDSCP The DSCP value to use when sending the packet.
Only applicable for ICMP Probes. | column | Unsigned32 | .1.3.6.1.4.1.207.8.4.4.4.606.1.1.10 |
| atLinkMonProbePacketSize The size of a probe packet.
Only applicable for ICMP Probes. | column | bytes Unsigned32 | .1.3.6.1.4.1.207.8.4.4.4.606.1.1.11 |
| atLinkMonProbeInterval The number of milliseconds between sending out each probe.
Range for an ICMP Ping probe is 100-10000.
Range for an HTTP Get probe is 30000-3600000. | column | ms Unsigned32 | .1.3.6.1.4.1.207.8.4.4.4.606.1.1.12 |
| atLinkMonProbeSampleSize The number of probe results to use when calculating the latency and jitter metrics.
Only applicable for ICMP Probes. | column | Unsigned32 | .1.3.6.1.4.1.207.8.4.4.4.606.1.1.13 |
| atLinkMonProbeEnabled Whether the probe is enabled or disabled.
If it is enabled, then the device will attempt to send probes if the link is up.
If it is disabled, then no probes will be sent. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.207.8.4.4.4.606.1.1.14 |
| atLinkMonProbeName Name of the probe. | column | AT-SMI-MIBDisplayStringUnsized | .1.3.6.1.4.1.207.8.4.4.4.606.1.1.2 |
| atLinkMonProbeIPVersion IP version of the probe, IPv4 or IPv6. | column | IPv4: 1, IPv6: 2 INET-ADDRESS-MIBInetVersion | .1.3.6.1.4.1.207.8.4.4.4.606.1.1.4 |
| atLinkMonProbeDestination The destination of the probe. | column | AT-SMI-MIBDisplayStringUnsized | .1.3.6.1.4.1.207.8.4.4.4.606.1.1.5 |
| atLinkMonProbeEgressIf The interface that the probe packets should egress. | column | AT-SMI-MIBDisplayStringUnsized | .1.3.6.1.4.1.207.8.4.4.4.606.1.1.6 |
| atLinkmonProbeEgreesIfValid Indicates if the interface that the probe packets egress is valid. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.207.8.4.4.4.606.1.1.7 |
| atLinkMonProbeSource The source IP address or interface.
Only applicable for ICMP Probes. | column | AT-SMI-MIBDisplayStringUnsized | .1.3.6.1.4.1.207.8.4.4.4.606.1.1.8 |
| atLinkMonProbeSourceValid Indicates if the source IP address or interface is valid.
Only applicable for ICMP Probes. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.207.8.4.4.4.606.1.1.9 |