atFilev2SourceStackID
AT-FILEv2-MIB ·
.1.3.6.1.4.1.207.8.4.4.4.600.3.1
Object
Set to the stack ID of the source device to be used for the
file operation. For devices that are not capable of being
stacked, set with the value 1. For a chassis switch, it
corresponds to the card ID. For VCStack Plus, 1-12 refers
to the cards on VCS stack member 1 and 13-24 refers to the
cards on VCS stack member 2. Refer to chassisMappingTable
for more details.
This value is ignored if the source device is set to TFTP.
Context
- MIB
- AT-FILEv2-MIB
- OID
.1.3.6.1.4.1.207.8.4.4.4.600.3.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- atFilev2FileOperation
- Siblings
- 14
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atFilev2Flash1 | node | - | .1.3.6.1.4.1.207.8.4.4.4.600.3.10 |
| atFilev2Card2 | node | - | .1.3.6.1.4.1.207.8.4.4.4.600.3.11 |
| atFilev2Nvs3 | node | - | .1.3.6.1.4.1.207.8.4.4.4.600.3.12 |
| atFilev2Tftp4 | node | - | .1.3.6.1.4.1.207.8.4.4.4.600.3.13 |
| atFilev2DirOperation | node | - | .1.3.6.1.4.1.207.8.4.4.4.600.3.14 |
| atFilev2Usb5 | node | - | .1.3.6.1.4.1.207.8.4.4.4.600.3.15 |
| atFilev2SourceDevice Set an integer that corresponds with a device found below:
0. Unconfigured (not settable)
1. Flash
2. Card
3. NVS
4. TFTP
For copying, you may use any combin… | scalar | Integer32 | .1.3.6.1.4.1.207.8.4.4.4.600.3.2 |
| atFilev2SourceFilename The filename of the source file to copy, move or delete.
Include any path as required, but the storage type is not
necessary. Setting a null string will return an error.
… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.207.8.4.4.4.600.3.3 |
| atFilev2DestinationStackID Set an integer corresponding to the stack ID of the stack
member to use as the destination. This value is ignored if the
destination device is set to TFTP, or if a deletion operat… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.207.8.4.4.4.600.3.4 |
| atFilev2DestinationDevice Set an integer that corresponds with a device found below:
0. Unconfigured (not settable)
1. Flash
2. Card
3. NVS
4. TFTP
For copying, you may use any combin… | scalar | Integer32 | .1.3.6.1.4.1.207.8.4.4.4.600.3.5 |
| atFilev2DestinationFilename The destination filename of the file to copy or move. Include
any path as required, but the storage type is not necessary.
For any operation other than a file deletion, setting a … | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.207.8.4.4.4.600.3.6 |
| atFilev2CopyBegin A read on this object can return several possible values,
depending on the current status of the system and the
various file operation objects:
idle … | scalar | OctetString | .1.3.6.1.4.1.207.8.4.4.4.600.3.7 |
| atFilev2MoveBegin A read on this object can return several possible values,
depending on the current status of the system and the various
file operation objects:
idle … | scalar | OctetString | .1.3.6.1.4.1.207.8.4.4.4.600.3.8 |
| atFilev2DeleteBegin A read on this object can return several possible values,
depending on the current status of the system and the various
file operation objects:
idle … | scalar | OctetString | .1.3.6.1.4.1.207.8.4.4.4.600.3.9 |