manual_transfer_to_emergency_feature_6ZE_status
ASCO-QEM-72EE2 ·
.1.3.6.1.4.1.7777.1.1.35
Object
scalar
SNMPv2-SMIInteger32
Manual transfer to emergency (Feature 6ZE) status
Context
- MIB
- ASCO-QEM-72EE2
- OID
.1.3.6.1.4.1.7777.1.1.35- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- transferswitch
- Siblings
- 202
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| phase_shift_between_normal_and_emergency Phase shift between normal & emergency | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.1 |
| engine_exerciser_with_load_active Engine exerciser with load active | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.10 |
| timer_2B_transfer_N_to_E_time_delay Timer 2B transfer N to E time delay | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.100 |
| timer_2E_engine_cool_down_time_delay Timer 2E engine cool down time delay | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.101 |
| timer_3AF_transfer_E_to_N_on_source_fail_time_delay Timer 3AF transfer E to N on source fail time delay | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.102 |
| timer_3A_T_transfer_E_to_N_on_test_time_delay Timer 3A T transfer E to N on test time delay | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.103 |
| timer_31F_N_to_E_pre_transfer_signal_time_delay Timer 31F N to E pre transfer signal time delay | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.104 |
| timer_31M_N_to_E_post_transfer_signal_time_delay Timer 31M N to E post transfer signal time delay | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.105 |
| timer_31G_E_to_N_pre_transfer_signal_time_delay Timer 31G E to N pre transfer signal time delay | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.106 |
| timer_31N_E_to_N_post_transfer_signal_time_delay Timer 31N E to N post transfer signal time delay | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.107 |
| dtts_load_disconnect_time_delay DTTS load disconnect time delay | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.108 |
| commit_to_transfer_after_engine_start Commit to transfer after engine start | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.109 |
| external_f17_is_active External F17 is active | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.11 |
| real_time_hour Real time hour | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.110 |
| real_time_minute Real time minute | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.111 |
| real_time_second Real time second | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.112 |
| calendar_year Calendar year | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.113 |
| calendar_month Calendar month | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.114 |
| calendar_day_of_month Calendar day of month | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.115 |
| calendar_day_of_week Calendar day of week | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.116 |
| total_time_E_has_been_acceptable_high_word Total time E has been acceptable(high word) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.117 |
| total_time_E_has_been_acceptable_low_word Total time E has been acceptable(low word) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.118 |
| total_time_N_has_been_acceptable_high_word Total time N has been acceptable(high word) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.119 |
| normal_voltage_phase_AB Normal voltage phase AB | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.12 |
| total_time_N_has_been_acceptable_low_word Total time N has been acceptable(low word) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.120 |
| total_number_of_days_CP_has_been_energized Total number of days CP has been energized | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.121 |
| total_number_of_TS_transfers Total number of TS transfers | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.122 |
| total_number_of_TS_transfers_due_to_source_failures Total number of TS transfers due to source failures | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.123 |
| controller_location Controller location | scalar | OctetString | .1.3.6.1.4.1.7777.1.1.124 |
| external_feature_5_enabled External Feature 5 enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.125 |
| external_feature_34_enabled External Feature 34 enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.126 |
| inphase_filter_enabled In-phase filter enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.127 |
| current_sensing_option_installed Current sensing option installed | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.128 |
| advanced_11C_option_installed Advanced 11C option Installed | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.129 |
| normal_voltage_phase_BC Normal voltage phase BC | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.13 |
| event_log_option_installed Event log option Installed | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.130 |
| rs485_communication_option_installed RS485 communication option Installed | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.131 |
| op1_common_alarm_option_installed OP1 common alarm option Installed | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.132 |
| total_time_load_connected_to_normal_high_word Total time load connected to normal (high word) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.133 |
| total_time_load_connected_to_normal_low_word Total time load connected to normal (low word) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.134 |
| total_time_load_connected_to_emergency_high_word Total time load connected to emergency (high word) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.135 |
| total_time_load_connected_to_emergency_low_word Total time load connected to emergency (low word) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.136 |
| rs485_port_address RS-485 port address | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.137 |
| rs485_port_baud_rate RS-485 port baud rate | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.138 |
| rs485_port_protocol RS-485 port protocol | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.139 |
| normal_voltage_phase_CA Normal voltage phase CA | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.14 |
| emulate_group_1 Emulate Group 1 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.140 |
| dtts_load_disconnect_recovery_mode_manual_or_auto DTTS load disconnect recovery mode - manual or auto | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.141 |
| timer_2B_transfer_N_to_E_on_test_time_delay Timer 2B transfer N to E on test time delay | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.142 |
| inphase_monitor_time_delay Inphase monitor time delay | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.143 |
| ats_total_transfer_time_in_10th_seconds ATS total transfer time in 10th seconds (real value in seconds requires division by 10) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.144 |
| dongle_installed Dongle installed | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.145 |
| language_selection_setting Language selection setting | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.146 |
| lcd_contrast_setting LCD contrast setting | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.147 |
| controller_name Controller name | scalar | OctetString | .1.3.6.1.4.1.7777.1.1.148 |
| boot_loader_version Boot loader version | scalar | OctetString | .1.3.6.1.4.1.7777.1.1.149 |
| normal_voltage_unbalance Normal voltage unbalance | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.15 |
| voltage_display_phase_label_selection Voltage display phase label selection | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.150 |
| source_1_or_source_2_selection_for_different_english_format Source 1 or source 2 selection for different English format | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.151 |
| external_battery_enabled External battery enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.152 |
| ts_data_gen_start_date TS data gen start date | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.153 |
| ts_data_gen_start_month TS data gen start month | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.154 |
| ts_data_gen_start_year TS data gen start year | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.155 |
| ts_data_gen_start_hour TS data gen start hour | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.156 |
| ts_data_gen_start_minutes TS data gen start minutes | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.157 |
| ts_data_gen_start_seconds TS data gen start seconds | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.158 |
| ts_data_gen_start_10th_of_seconds TS data gen start 10th of seconds | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.159 |
| ts_data_gen_start_elapsed_time_in_seconds TS data gen start elapsed time in seconds | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.160 |
| total_active_alarm_number Total active alarm number | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.161 |
| load_shed_direction Load shed direction | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.162 |
| dtts_only_load_shed_on_source_failure DTTS only - load shed on source failure | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.163 |
| dtts_only_load_shed_on_request_f17 DTTS only - load shed on request F17 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.164 |
| normal_voltage_unbalance_dropout Normal voltage unbalance dropout.
Parameter settings display for 3 phase only | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.165 |
| normal_voltage_unbalance_pickup Normal voltage unbalance pickup.
Parameter settings display for 3 phase only | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.166 |
| emergency_voltage_unbalance_dropout Emergency voltage unbalance dropout.
Parameter settings display for 3 phase only | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.167 |
| emergency_voltage_unbalance_pickup Emergency voltage unbalance pickup.
Parameter settings display for 3 phase only | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.168 |
| emergency_voltage_phase_ab Emergency voltage phase AB | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.169 |
| emergency_voltage_phase_bc Emergency voltage phase BC | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.170 |
| emergency_voltage_unbalance Emergency voltage unbalance | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.171 |
| emergency_source_3phase_sensing Emergency source 3 phase sensing | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.172 |
| transfer_switch_bypass_or_not Transfer Switch Bypass Setting | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.173 |
| transfer_switch_or_dual_breaker Transfer Switch or Dual Breaker Setting | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.174 |
| transfer_switch_locked_out Transfer Switch Locked out | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.175 |
| ctts_extended_parallel_alarm CTTS Extended Parallel Alarm | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.176 |
| ctts_failure_to_synch_alarm CTTS Failure To Synch Alarm | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.177 |
| dtts_load_disconnect DTTS Load Disconnect | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.178 |
| normal_breaker_tripped Normal Breaker Tripped | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.179 |
| emergency_voltage_phase_CA Emergency voltage phase CA | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.18 |
| emergency_breaker_tripped Emergency Breaker Tripped | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.180 |
| feature_6b Feature 6B Status | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.181 |
| feature_6c Feature 6C Status | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.182 |
| feature_17_serial Feature 17 Serial Status | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.183 |
| feature_29 Feature 29 Status | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.184 |
| feature_34a Feature 34A Status | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.185 |
| feature_89 Feature 89 Status | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.186 |
| feature_ct_bypass Feature CT Bypass Status | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.187 |
| feature_alarm_reset Feature Alarm Reset Status | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.188 |
| feature_6d Feature 6D Status | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.189 |
| nominal_voltage Nominal voltage | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.19 |
| feature_34t Feature 34T Status | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.190 |
| control_panel_eventlog_enabled Control Panel Event Log Enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.191 |
| pt_ratio_numerator PT Ratio Numerator | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.192 |
| pt_ratio_denominator PT Ratio Denominator | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.193 |
| control_panel_name Control Panel Name | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.194 |
| normal_voltage_unbalance_enabled Normal Voltage Unbalance Enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.195 |
| emergency_voltage_unbalance_enabled Emergency Voltage Unbalance Enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.196 |
| bypass_31F_and_31M_on_N_source_failure Bypass 31F and 31M on N source failure | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.197 |
| bypass_31G_and_31N_on_E_source_failure Bypass 31G and 31N on E source failure | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.198 |
| external_battery_present External Battery Present | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.199 |
| normal_frequency Normal frequency | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.2 |
| nominal_frequency Nominal frequency | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.20 |
| ctts_in_synch_monitor_time_delay CTTS In Synch Monitor Time Delay | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.200 |
| ctts_fail_to_synch_time_delay CTTS Fail To Synch Time Delay | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.201 |
| ctts_extended_parallel_time_delay CTTS Extended Parallel Time Delay | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.202 |
| shed_load_in_phase Shed Load In Phase | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.203 |
| isolate_load_on_source_failure Isolate Load On Source Failure | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.204 |
| isolate_load_on_F17 Isolate Load On F17 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.205 |
| fail_to_sync_auto_ct_bypass Fail To Sync Auto CT Bypass | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.206 |
| transfer_in_phase_on_ct_bypass_if_load_disconnect Transfer In phase On CT Bypass If load
is disconnected | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.207 |
| network_configuration Control Panel Network configuration | scalar | OctetString | .1.3.6.1.4.1.7777.1.1.208 |
| normal_source_3phase_sensing Normal source 3 phase sensing | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.21 |
| transfer_switch_type Transfer switch type (OTTS,DTTS) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.22 |
| transfer_switch_ampere_rating Transfer switch ampere rating | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.23 |
| controller_software_version Controller software version | scalar | OctetString | .1.3.6.1.4.1.7777.1.1.24 |
| controller_software_date Controller software date | scalar | OctetString | .1.3.6.1.4.1.7777.1.1.25 |
| external_parameter_lock_is_active External parameter lock is active | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.26 |
| engine_running Engine running | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.27 |
| controller_state Controller state | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.28 |
| controller_status_state_data Controller status state data | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.29 |
| emergency_frequency Emergency frequency | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.3 |
| timer_bypass_feature_6B_status Timer bypass (Feature 6B) status | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.30 |
| remote_transfer_feature_17_status Remote transfer (Feature 17) status | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.31 |
| load_shed_feature_30_status Load shed (Feature 30) status | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.32 |
| transfer_inhibit_to_emergency_feature_34B_status Transfer inhibit to emergency (Feature 34B) status | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.33 |
| local_test_feature_5_status Local test (Feature 5) status | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.34 |
| current_sensing Current sensing | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.36 |
| phase_A_current Phase A current (A).
With 1 or 2 CT selected this is labeled as I1 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.37 |
| phase_B_current Phase B current (A) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.38 |
| phase_C_current Phase C current (A).
With 2 CT selected this is labeled as I2 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.39 |
| main_on_normal Main on normal | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.4 |
| failure_to_accept_timer Failure to accept timer | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.40 |
| normal_to_emergency_pretransfer_time_delay_feature_31_bypass_enabled Normal to emergency pretransfer time delay (Feature 31) bypass enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.41 |
| emergency_to_normal_pretransfer_time_delay_feature_31_bypass_enabled Emergency to normal pretransfer time delay (Feature 31) bypass enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.42 |
| commit_to_transfer_enabled Commit to transfer enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.43 |
| bypass_DTTS_source_failure_enabled Bypass DTTS source failure enabled - data for DTTS and Group1 emulation is NOT enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.44 |
| inphase_transfer_enabled Inphase transfer enabled - only for OTTS | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.45 |
| inphase_monitor_for_load_shed_feature_30_enabled Inphase monitor for load shed (Feature 30) enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.46 |
| fail_accept_timer_enabled Fail accept timer enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.47 |
| transfer_retransfer_time_delay_bypass_feature_6B_input_enabled Transfer/retransfer time delay bypass (Feature 6B) input enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.48 |
| remote_transfer_feature_17_input_enabled Remote transfer (Feature 17) input enabled - data for transfer switch in auto mode only | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.49 |
| main_on_emergency Main on emergency | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.5 |
| retransfer_to_normal_mode_selector_feature_6DL_input_enabled Retransfer to normal mode selector (Feature 6DL) enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.50 |
| serial_remote_transfer_feature_17_enabled Serial remote transfer (Feature 17) enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.51 |
| voltage_unbalance_enabled Voltage unbalance enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.52 |
| current_sensing_module_present Current sensing module present | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.53 |
| alert_LED_active Alert LED active | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.54 |
| not_in_auto_LED_active Not in Auto LED active | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.55 |
| daylight_savings Daylight savings | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.58 |
| loss_of_emergency_when_connected_to_emergency_alarm_enabled Loss of emergency when connected to emergency alarm enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.59 |
| auxiliary_on_normal Auxiliary on normal | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.6 |
| expiration_of_failure_to_accept_timer_alarm_enabled Expiration of failure to accept timer alarm enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.60 |
| load_disconnect_enabled_DTTS_only Load disconnect enabled (DTTS only) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.61 |
| op1_is_feature_31 OP1 is Feature 31 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.62 |
| op1_is_common_alarm OP1 is common alarm | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.63 |
| op1_is_NR2 OP1 is NR2 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.64 |
| op1_is_not_in_auto OP1 is not in auto | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.65 |
| op2_is_feature_31 OP2 is Feature 31 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.66 |
| op2_is_common_alarm OP2 is common alarm | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.67 |
| op2_is_NR2 OP2 is NR2 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.68 |
| op2_is_not_in_auto OP2 is not in auto | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.69 |
| auxiliary_on_emergency Auxiliary on emergency | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.7 |
| op2_1G_enabled OP2 1G enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.70 |
| op3_is_feature_31 OP3 is Feature 31 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.71 |
| op3_is_common_alarm OP3 is common alarm | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.72 |
| op3_is_NR2 OP2 is NR2 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.73 |
| op3_is_not_in_auto OP3 is not in auto | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.74 |
| controller_serial_number Controller serial number | scalar | OctetString | .1.3.6.1.4.1.7777.1.1.75 |
| engine_exerciser_F11C_advanced_program_number Engine exerciser (F11C) advanced program number | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.76 |
| engine_exerciser_F11C_enabled Engine exerciser (F11C) enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.77 |
| engine_exerciser_F11C_test_with_load_transfer_enabled Engine exerciser (F11C) test with load transfer enabled | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.78 |
| engine_exerciser_F11C_start_week Engine exerciser (F11C) start week | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.79 |
| normal_source_available Normal source available | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.8 |
| engine_exerciser_F11C_day_of_week Engine exerciser (F11C) day of week | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.80 |
| engine_exerciser_F11C_start_time_hours Engine exerciser (F11C) start time hours | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.82 |
| engine_exerciser_F11C_start_time_minutes Engine exerciser (F11C) start time minutes | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.83 |
| engine_exerciser_F11C_run_time_hours Engine exerciser (F11C) run time hours | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.84 |
| engine_exerciser_F11C_run_time_minutes Engine exerciser (F11C) schedule run time minutes | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.85 |
| normal_voltage_dropout Normal voltage dropout | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.86 |
| normal_voltage_pickup Normal voltage pickup | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.87 |
| normal_over_voltage_trip Normal over voltage trip | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.88 |
| normal_frequency_dropout Normal frequency dropout | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.89 |
| emergency_source_available Emergency source available | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.9 |
| normal_frequency_pickup Normal frequency pickup | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.90 |
| normal_over_frequency_trip Normal over frequency trip | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.91 |
| emergency_voltage_dropout Emergency voltage dropout | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.92 |
| emergency_voltage_pickup Emergency voltage pickup | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.93 |
| emergency_over_voltage_trip Emergency over voltage trip | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.94 |
| emergency_frequency_dropout Emergency frequency dropout | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.95 |
| emergency_frequency_pickup Emergency frequency pickup | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.96 |
| emergency_over_frequency_trip Emergency over frequency trip | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.97 |
| timer_1C_engine_start_time_delay Timer 1C engine start time delay | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.98 |
| timer_1F_engine_fail_time_delay Timer 1F engine fail time delay | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7777.1.1.99 |