thresholdLev1Subject
ASANTE-AH1012-MIB ·
.1.3.6.1.4.1.298.1.3.6.1.1.1.6
Object
column
optional
r/w
Enumeration
Variable checking for in trap. These are the type of frames that a trap will be verified against.
Context
- MIB
- ASANTE-AH1012-MIB
- OID
.1.3.6.1.4.1.298.1.3.6.1.1.1.6- Type
- column
- Access
- readwrite
- Status
- optional
- Parent
- thresholdLev1Entry
- Table
- thresholdLev1Table
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | readable-frames |
3 | mcast-frames |
4 | bcast-frames |
5 | frame-too-longs |
6 | runts |
7 | alignment-errors |
8 | fragment-errors |
9 | fCS-errors |
10 | iFG-errors |
11 | data-rate-mismatch |
12 | short-events |
13 | collisions |
14 | late-collisions |
15 | auto-partitions |
16 | sfd-missing |
17 | bad-frames |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| thresholdLev1Index optional An index that uniquely identifies an entry in the
alarm table. | column | Integer32 | .1.3.6.1.4.1.298.1.3.6.1.1.1.1 |
| thresholdLev1DetectedValue optional The value of the statistic for the last
sampling period. | column | Integer32 | .1.3.6.1.4.1.298.1.3.6.1.1.1.10 |
| thresholdLev1RisingEvent optional How to respond to a triggered event for a
rising event. | column | Enumeration | .1.3.6.1.4.1.298.1.3.6.1.1.1.11 |
| thresholdLev1FallingEvent optional How to respond to a triggered event for a
falling event. | column | Enumeration | .1.3.6.1.4.1.298.1.3.6.1.1.1.12 |
| thresholdLev1Interval optional The interval in seconds over which the data is
sampled. | column | Integer32 | .1.3.6.1.4.1.298.1.3.6.1.1.1.13 |
| thresholdLev1OwnerString optional 8-byte octet reserved for the owner who
defined this entry. | column | OctetString | .1.3.6.1.4.1.298.1.3.6.1.1.1.14 |
| thresholdLev1Status optional Status of entry in threshold/trap table. | column | Enumeration | .1.3.6.1.4.1.298.1.3.6.1.1.1.2 |
| thresholdLev1Target optional Set target for threshold definition. Either whole
hub(2) or particular port (3). | column | Enumeration | .1.3.6.1.4.1.298.1.3.6.1.1.1.3 |
| thresholdLev1GroupIndex optional Group ID for trap set. One note--if the
target is selected as hub, the group index
will be ignored. | column | Integer32 | .1.3.6.1.4.1.298.1.3.6.1.1.1.4 |
| thresholdLev1PortIndex optional Port number for trap set. One note--if the
target is selected as hub, the port index
will be ignored. | column | Integer32 | .1.3.6.1.4.1.298.1.3.6.1.1.1.5 |
| thresholdLev1SampleType optional The method of sampling the selected variable
and calculating the value to be compared
against the threshold. | column | Enumeration | .1.3.6.1.4.1.298.1.3.6.1.1.1.7 |
| thresholdLev1StartupAlarm optional When the trap is triggered in relation to value set.
When goes above (2), below (3), or changes at
all from (4). | column | Enumeration | .1.3.6.1.4.1.298.1.3.6.1.1.1.8 |
| thresholdLev1WaterMark optional Counter of threshold. | column | Integer32 | .1.3.6.1.4.1.298.1.3.6.1.1.1.9 |